Fuel injectors
  1. Home
  2. injection
  3. #1014020260

101402-0260 ZEXEL F 019 Z20 435 BOSCH INJECTION-PUMP ASSEMBLY f019z20435 1014020260 5156012003


101402-0260 INJECTION-PUMP ASSEMBLY
Rating:
10
Buy INJECTION-PUMP ASSEMBLY 101402-0260 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH F 019 Z20 435 f019z20435
ZEXEL 101402-0260 1014020260
ISUZU 5156012003 5156012003

Service parts 101402-0260 INJECTION-PUMP ASSEMBLY:

1. _
2. FUEL INJECTION PUMP 101040-8180
3. GOVERNOR 105410-5590
4. SUPPLY PUMP 105220-4772
5. AUTOM. ADVANCE MECHANIS
6. COUPLING PLATE
7. COUPLING PLATE 156635-5321
8. _
9. _
10. NOZZLE AND HOLDER ASSY 105100-4582
11. Nozzle and Holder 5-15300-089-1
12. Open Pre:MPa(Kqf/cm2) 18.1{185}
13. NOZZLE-HOLDER 105031-3952
14. NOZZLE 105015-4130
15. NOZZLE SET

Include in #1:

101402-0260 as INJECTION-PUMP ASSEMBLY
106672-3860 as _

Cross reference number

BOSCH F 019 Z20 435 f019z20435
ZEXEL 101402-0260 1014020260
ISUZU 5156012003 5156012003


Zexel num
Bosch num
Firm num
Name
101402-0260 
101402-4470 
F 019 Z20 435 
5156012003  ISUZU
INJECTION-PUMP ASSEMBLY
4BD1 * K 14BC PE4A,5A, PE

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil   ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8140
Bosch type code   EF8511/9A
Nozzle   105780-0000
Bosch type code   DN12SD12T
Nozzle holder   105780-2080
Bosch type code   EF8511/9
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm) mm   6-2-600
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
Direction of rotation (viewed from drive side)
Right   R
Injection timing adjustment
Direction of rotation (viewed from drive side)
Right   R
Injection order   1-3-4-2
Pre-stroke mm   3.6 3.55 3.65
Beginning of injection position
Drive side   NO.1
Difference between angles 1
Cal 1-3 deg.   90 89.5 90.5
Difference between angles 2
Cal 1-4 deg.   180 179.5 180.5
Difference between angles 3
Cyl.1-2 deg.   270 269.5 270.5
Injection quantity adjustment
Adjusting point   B
Rack position   9.7
Pump speed r/min   800 800 800
Average injection quantity mm3/st.   57.8 56.3 59.3
Max. variation between cylinders %   0 -2 2
Basic   *
Fixing the lever   *
Injection quantity adjustment_02
Adjusting point   C
Rack position   7+-0.5
Pump speed r/min   325 325 325
Average injection quantity mm3/st.   10.2 8.8 11.6
Max. variation between cylinders %   0 -14 14
Fixing the rack   *

Test data Ex:

Governor adjustment

Test data 101402-0260
N:Pump speed R:Rack position (mm) (1)Target notch: K (2)Tolerance for racks not indicated: +-0.05mm.
----------
K=9
----------

Speed control lever angle

Test data 101402-0260
F:Full speed I:Idle D:Dead point
----------

----------
a=32deg+-5deg b=14deg+-5deg c=6deg

Stop lever angle

Test data 101402-0260
N:Pump normal S:Stop the pump.
----------

----------
a=19deg+-5deg b=53deg+-5deg

Timing setting

Test data 101402-0260
(1)Pump vertical direction (2)Position of gear mark 'CC' at No 1 cylinder's beginning of injection (3)B.T.D.C.: aa (4)-
----------
aa=18deg
----------
a=(90deg)




Have questions with 101402-0260?





Group cross 101402-0260 ZEXEL

Isuzu 

101402-0200  
 
5156008513 
INJECTION-PUMP ASSEMBLY
4BB1
101402-0210  
 
 
INJECTION-PUMP ASSEMBLY
8PB1
101402-0220  
9 400 613 815 
 
INJECTION-PUMP ASSEMBLY
8PA1
101402-0230  
 
5156010573 
INJECTION-PUMP ASSEMBLY
4BB1
101402-0240  
9 400 613 816 
 
INJECTION-PUMP ASSEMBLY
8PA1
101402-0250  
9 400 613 817 
 
INJECTION-PUMP ASSEMBLY
8PA1
101402-0260  

101402-4470 
F 019 Z20 435 
5156012003 
INJECTION-PUMP ASSEMBLY
4BD1
101402-0270  
F 019 Z10 279 
5156011143 
INJECTION-PUMP ASSEMBLY
4BD1
101402-0280  
 
5156011133 
INJECTION-PUMP ASSEMBLY
4BB1
101402-0290  
F 019 Z10 159 
5156011443 
INJECTION-PUMP ASSEMBLY
4BD1
Back to top