101401-9771 ZEXEL INJECTION-PUMP ASSEMBLY Calibration Data 1014019771 1670019d61

Information Cross number Calibration Data Calibration Data Ex

Price: query
Buy now
Add to cart Go to cart

Rating:

Buy INJECTION-PUMP ASSEMBLY 101401-9771 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

ZEXEL 101401-9771 1014019771

NISSAN-DIESEL 1670019D61 1670019d61

Cross reference number

ZEXEL 101401-9771 1014019771

NISSAN-DIESEL 1670019D61 1670019d61

Zexel num

Bosch num

Firm num

Name

101401-9771
101401-9772

1670019D61 NISSAN-DIESEL

INJECTION-PUMP ASSEMBLY
FD46T * K 14BD PE4AD PE

Calibration Data:

Adjustment conditions

Test oil
1404 Test oil ISO4113 or {SAEJ967d}

Test oil temperature degC 40 40 45

Nozzle and nozzle holder 105780-8140

Bosch type code EF8511/9A

Nozzle 105780-0000

Bosch type code DN12SD12T

Nozzle holder 105780-2080

Bosch type code EF8511/9

Opening pressure MPa 17.2

Opening pressure kgf/cm2 175

Injection pipe
Outer diameter - inner diameter - length (mm) mm 6-2-600

Overflow valve 134424-4120

Overflow valve opening pressure kPa 255 221 289

Overflow valve opening pressure kgf/cm2 2.6 2.25 2.95

Tester oil delivery pressure kPa 157 157 157

Tester oil delivery pressure kgf/cm2 1.6 1.6 1.6

Direction of rotation (viewed from drive side)
Right R

Injection timing adjustment

Direction of rotation (viewed from drive side)
Right R

Injection order 1-3-4-2

Pre-stroke mm 3.2 3.15 3.25

Rack position
Point A R=A

Beginning of injection position
Drive side NO.1

Difference between angles 1
Cal 1-3 deg. 90 89.5 90.5

Difference between angles 2
Cal 1-4 deg. 180 179.5 180.5

Difference between angles 3
Cyl.1-2 deg. 270 269.5 270.5

Injection quantity adjustment

Adjusting point -

Rack position 14.6

Pump speed r/min 1550 1550 1550

Average injection quantity mm3/st. 108.5 106.9 110.1

Max. variation between cylinders % 0 -3.5 3.5

Basic *

Fixing the rack *

Standard for adjustment of the maximum variation between cylinders *

Injection quantity adjustment_02

Adjusting point H

Rack position 9.7+-0.5

Pump speed r/min 325 325 325

Average injection quantity mm3/st. 13 11.2 14.8

Max. variation between cylinders % 0 -10 10

Fixing the rack *

Standard for adjustment of the maximum variation between cylinders *

Injection quantity adjustment_03

Adjusting point A

Rack position R1(14.6)

Pump speed r/min 1550 1550 1550

Average injection quantity mm3/st. 108.5 107.5 109.5

Basic *

Fixing the lever *

Boost pressure kPa 70.6 70.6

Boost pressure mmHg 530 530

Injection quantity adjustment_04

Adjusting point B

Rack position R1-1.05

Pump speed r/min 900 900 900

Average injection quantity mm3/st. 88 84 92

Fixing the lever *

Boost pressure kPa 70.6 70.6

Boost pressure mmHg 530 530

Injection quantity adjustment_05

Adjusting point C

Rack position R2-0.95

Pump speed r/min 500 500 500

Average injection quantity mm3/st. 58 54 62

Fixing the lever *

Boost pressure kPa 0 0 0

Boost pressure mmHg 0 0 0

Boost compensator adjustment

Pump speed r/min 500 500 500

Rack position R2-0.95

Boost pressure kPa 10.7 9.4 12

Boost pressure mmHg 80 70 90

Boost compensator adjustment_02

Pump speed r/min 500 500 500

Rack position R2(R1-1. 35)

Boost pressure kPa 57.3 57.3 57.3

Boost pressure mmHg 430 430 430

Timer adjustment

Pump speed r/min 1000--

Advance angle deg. 0 0 0

Remarks
Start

Timer adjustment_02

Pump speed r/min 950

Advance angle deg. 0.5

Timer adjustment_03

Pump speed r/min 1550

Advance angle deg. 5.1 4.6 5.6

Timer adjustment_04

Pump speed r/min -

Advance angle deg. 7 6.5 7.5

Remarks
Measure the actual speed, stop

Test data Ex:

Governor adjustment

N:Pump speed R:Rack position (mm) (1)Torque cam stamping: T1 (2)Tolerance for racks not indicated: +-0.05mm. (3)Boost compensator stroke: BCL
----------
T1=L33 BCL=0.95+-0.1mm
----------

Speed control lever angle

F:Full speed I:Idle (1)Use the hole at R = aa (2)Stopper bolt set position 'H'
----------
aa=32mm
----------
a=71deg+-5deg b=(38deg)+-3deg

Stop lever angle

N:Pump normal S:Stop the pump. (1)Use the pin at R = aa
----------
aa=15mm
----------
a=29deg+-5deg b=10deg+-5deg

0000001501 LEVER

(A) Speed lever (lower) (B) Stopper bolt (C) Special lever (upper) a:Point A (inside lever) 1. Special lever adjustment (1)With the speed lever at the idle position, set the accelerator lever stopper bolt so that the accelerator lever contacts the speed lever at point a. (2)Back off the stopper bolt L and set.
----------
L=1+0.5mm
----------

0000001601 POTENTIO METER

(A) : Governor plan view (B): Potentiometer harness terminal (C): Potentiometer connection diagram (D) : Output voltage standard value (S): Voltage P/M: potentiometer (v): output voltage (V) (p): direction of potentiometer rotation 1. Adjustment procedures (1)Apply DCV1 to potentiometer harness terminal (B) to obtain the specified output voltage. (2)Fix the speed lever at the full side. (3)Loosen the bolt (S), and move the potentiometer from left and right. (4)Adjust so that the output voltage at full is within the standard values. (5)Fix bolt (S). (6)Repeatedly move the speed lever from the full side to the idle side. (7)Check that it is within the standard values at full and idle.
----------
V1=5+-0.02V
----------
V1=5+-0.02V Va=(5)V Vb=(3.75)+-0.2V Vc=0.58+-0.3V

Timing setting

(1)Pump vertical direction (2)Position of gear's standard threaded hole at No 1 cylinder's beginning of injection (3)B.T.D.C.: aa (4)-
----------
aa=5deg
----------
a=(50deg)