106871-7930 ZEXEL INJECTION-PUMP ASSEMBLY Calibration Data 1068717930 me091129


106871-7930 INJECTION-PUMP ASSEMBLY
Rating:
13
Buy INJECTION-PUMP ASSEMBLY 106871-7930 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

ZEXEL 106871-7930 1068717930
MITSUBISHI ME091129 me091129

Service parts 106871-7930 INJECTION-PUMP ASSEMBLY:

1. _
2. FUEL INJECTION PUMP 106087-7620
3. GOVERNOR 105487-4270
4. SUPPLY PUMP 105207-1140
5. AUTOM. ADVANCE MECHANIS 105681-0501
6. COUPLING PLATE 105663-0390
7. COUPLING PLATE
8. _
9. _
10. NOZZLE AND HOLDER ASSY 105100-7890
11. Nozzle and Holder ME091246
12. Open Pre:MPa(Kqf/cm2) 17.7{180}/21.6{220}
13. NOZZLE-HOLDER 105031-4500
14. NOZZLE 105015-8270
15. NOZZLE SET

Include in #1:

106871-7930 as INJECTION-PUMP ASSEMBLY

Cross reference number

ZEXEL 106871-7930 1068717930
MITSUBISHI ME091129 me091129


Zexel num
Bosch num
Firm num
Name
106871-7930 
106873-2050 
 
ME091129  MITSUBISHI
INJECTION-PUMP ASSEMBLY
8DC9 * K

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil
  ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8140
Bosch type code   EF8511/9A
Nozzle   105780-0000
Bosch type code   DN12SD12T
Nozzle holder   105780-2080
Bosch type code   EF8511/9
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm)
mm   8-3-600
Overflow valve opening pressure kPa   157 123 191
Overflow valve opening pressure kgf/cm2   1.6 1.25 1.95
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
Direction of rotation (viewed from drive side)
Right
  R
Injection timing adjustment
Direction of rotation (viewed from drive side)
Right
  R
Injection order   1-2-7-3- 4-5-6-8
Pre-stroke mm   4.8 4.75 4.85
Beginning of injection position
Governor side
  NO.1
Difference between angles 1
Cyl.1-2
deg.   45 44.5 45.5
Difference between angles 2
Cal 1-7
deg.   90 89.5 90.5
Difference between angles 3
Cal 1-3
deg.   135 134.5 135.5
Difference between angles 4
Cal 1-4
deg.   180 179.5 180.5
Difference between angles 5
Cal 1-5
deg.   225 224.5 225.5
Difference between angles 6
Cal 1-6
deg.   270 269.5 270.5
Difference between angles 7
Cal 1-8
deg.   315 314.5 315.5
Injection quantity adjustment
Adjusting point   -
Rack position   10
Pump speed r/min   700 700 700
Each cylinder's injection qty mm3/st.   116.5 113 120
Basic   *
Fixing the rack   *
Standard for adjustment of the maximum variation between cylinders   *
Injection quantity adjustment_02
Adjusting point   C
Rack position   6.1+-0.5
Pump speed r/min   225 225 225
Each cylinder's injection qty mm3/st.   10 8.5 11.5
Fixing the rack   *
Standard for adjustment of the maximum variation between cylinders   *
Injection quantity adjustment_03
Adjusting point   A
Rack position   R1(10)
Pump speed r/min   700 700 700
Average injection quantity mm3/st.   116.5 115.5 117.5
Basic   *
Fixing the lever   *
Injection quantity adjustment_04
Adjusting point   E
Rack position   -
Pump speed r/min   100 100 100
Average injection quantity mm3/st.   130 110 150
Fixing the lever   *
Remarks
After startup boost setting
 
Timer adjustment
Pump speed r/min   900
Advance angle deg.   1.4
Load   3/4
Timer adjustment_02
Pump speed r/min   1100
Advance angle deg.   5 4.5 5.5
Load   4/4
Remarks
Finish
 

Test data Ex:

Governor adjustment

Test data 106871-7930
N:Pump speed R:Rack position (mm) (1)Lever ratio: RT (2)Target shim dimension: TH (3)Excess fuel setting for starting: SXL (4)Damper spring setting: DL
----------
RT=1 TH=2.1mm SXL=10.2+-0.1mm DL=4.3-0.2mm
----------

Speed control lever angle

Test data 106871-7930
F:Full speed
----------

----------
a=20deg+-5deg

0000000901

Test data 106871-7930
F:Full load I:Idle (1)Stopper bolt setting
----------

----------
a=10deg+-5deg b=25.5deg+-3deg

Stop lever angle

Test data 106871-7930
S:Stop the pump. (1)Rack position = aa (2)Stopper bolt setting (3)Free (at shipping)
----------
aa=3.8-0.5mm
----------
a=(10.5deg) b=56.5deg+7deg-5deg

0000001501 MICRO SWITCH

Adjustment of the micro-switch Adjust the bolt to obtain the following lever position when the micro-switch is ON. (1)Speed N1 (2)Rack position Ra
----------
N1=325+-5r/min Ra=5.6mm
----------

Timing setting

Test data 106871-7930
(1)Pump vertical direction (2)Coupling's key groove position at No 1 cylinder's beginning of injection (3)- (4)-
----------

----------
a=(40deg)




Have questions with 106871-7930?





Group cross 106871-7930 ZEXEL

 
 
INJECTION-PUMP ASSEMBLY

Mitsubishi 

 
ME091252 
INJECTION-PUMP ASSEMBLY
8DC11
 
 
INJECTION-PUMP ASSEMBLY

Mitsubishi 

 
ME091253 
INJECTION-PUMP ASSEMBLY
8DC11
9 400 612 637 
ME098573 
INJECTION-PUMP ASSEMBLY
8DC9TC
106871-7930  

106873-2050 
 
ME091129 
INJECTION-PUMP ASSEMBLY
8DC9
 
ME091264 
INJECTION-PUMP ASSEMBLY
8DC82
 
 
INJECTION-PUMP ASSEMBLY

Mitsubishi 

9 400 618 246 
ME091151 
INJECTION-PUMP ASSEMBLY
8DC82
 
 
INJECTION-PUMP ASSEMBLY

Mitsubishi 

9 400 618 247 
ME091152 
INJECTION-PUMP ASSEMBLY
8DC82
 
ME091282 
INJECTION-PUMP ASSEMBLY
8DC10
 
ME091283 
INJECTION-PUMP ASSEMBLY
8DC10
 
ME091284 
INJECTION-PUMP ASSEMBLY
8DC11
Back to top