106871-2052 ZEXEL 9 400 618 079 BOSCH INJECTION-PUMP ASSEMBLY 9400618079 1068712052 me066131


106871-2052 INJECTION-PUMP ASSEMBLY
Rating:
39
Buy INJECTION-PUMP ASSEMBLY 106871-2052 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH 9 400 618 079 9400618079
ZEXEL 106871-2052 1068712052
MITSUBISHI ME066131 me066131

Cross reference number

BOSCH 9 400 618 079 9400618079
ZEXEL 106871-2052 1068712052
MITSUBISHI ME066131 me066131


Zexel num
Bosch num
Firm num
Name
106871-2052 
9 400 618 079 
ME066131  MITSUBISHI
INJECTION-PUMP ASSEMBLY
8DC81 K 14CD INJECTION PUMP ASSY PE8P PE

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil
  ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8140
Bosch type code   EF8511/9A
Nozzle   105780-0000
Bosch type code   DN12SD12T
Nozzle holder   105780-2080
Bosch type code   EF8511/9
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm)
mm   8-3-600
Overflow valve   134424-1320
Overflow valve opening pressure kPa   157 123 191
Overflow valve opening pressure kgf/cm2   1.6 1.25 1.95
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
Direction of rotation (viewed from drive side)
Right
  R
Injection timing adjustment
Direction of rotation (viewed from drive side)
Right
  R
Injection order   1-2-7-3- 4-5-6-8
Pre-stroke mm   4.8 4.75 4.85
Beginning of injection position
Governor side
  NO.1
Difference between angles 1
Cyl.1-2
deg.   45 44.5 45.5
Difference between angles 2
Cal 1-7
deg.   90 89.5 90.5
Difference between angles 3
Cal 1-3
deg.   135 134.5 135.5
Difference between angles 4
Cal 1-4
deg.   180 179.5 180.5
Difference between angles 5
Cal 1-5
deg.   225 224.5 225.5
Difference between angles 6
Cal 1-6
deg.   270 269.5 270.5
Difference between angles 7
Cal 1-8
deg.   315 314.5 315.5
Injection quantity adjustment
Adjusting point   -
Rack position   9
Pump speed r/min   700 700 700
Each cylinder's injection qty mm3/st.   85 82.4 87.6
Basic   *
Fixing the rack   *
Standard for adjustment of the maximum variation between cylinders   *
Injection quantity adjustment_02
Adjusting point   C
Rack position   6.7+-0.5
Pump speed r/min   200 200 200
Each cylinder's injection qty mm3/st.   18.5 15.7 21.3
Fixing the rack   *
Standard for adjustment of the maximum variation between cylinders   *
Injection quantity adjustment_03
Adjusting point   A
Rack position   R1(9+-0. 5)
Pump speed r/min   700 700 700
Average injection quantity mm3/st.   85 84 86
Fixing the lever   *
Injection quantity adjustment_04
Adjusting point   B
Rack position   R1(9+-0. 5)
Pump speed r/min   1100 1100 1100
Average injection quantity mm3/st.   97 93.1 100.9
Difference in delivery mm3/st.   7.8 7.8 7.8
Fixing the lever   *
Injection quantity adjustment_05
Adjusting point   E
Rack position   -
Pump speed r/min   100 100 100
Average injection quantity mm3/st.   130 110 150
Fixing the lever   *
Remarks
After startup boost setting
 
Timer adjustment
Pump speed r/min   600+-50
Advance angle deg.   0 0 0
Remarks
Start
 
Timer adjustment_02
Pump speed r/min   700
Advance angle deg.   0.7 0.2 1.2
Timer adjustment_03
Pump speed r/min   850
Advance angle deg.   2 1.5 2.5
Timer adjustment_04
Pump speed r/min   1000
Advance angle deg.   3.6 3.1 4.1
Timer adjustment_05
Pump speed r/min   1150
Advance angle deg.   5.5 5 6
Remarks
Finish
 

Test data Ex:

Governor adjustment

Test data 106871-2052
N:Pump speed R:Rack position (mm) (1)Beginning of damper spring operation: DL (2)Excess fuel setting for starting: SXL
----------
DL=5-0.2mm SXL=R1+0.2mm
----------

0000000901

Test data 106871-2052
F:Full load I:Idle (1)Stopper bolt setting
----------

----------
a=23deg+-5deg b=24.5deg+-3deg

Stop lever angle

Test data 106871-2052
N:Pump normal S:Stop the pump.
----------

----------
a=56deg+-5deg b=64deg+-5deg

0000001501 MICRO SWITCH

Adjustment of the micro-switch Adjust the bolt to obtain the following lever position when the micro-switch is ON. (1)Speed N1 (2)Rack position Ra
----------
N1=325+-5r/min Ra=6.3mm
----------




Have questions with 106871-2052?





Group cross 106871-2052 ZEXEL

 
0429051861 

S8A

Mitsubishi 

 
3126030010 

 
3126032010 

8DC9
 
3126030030 
INJECTION-PUMP ASSEMBLY
 
ME066127 
INJECTION-PUMP ASSEMBLY
8DC9
 
3126035010 

 
3126037010 

8DC81
 
3126035030 
INJECTION-PUMP ASSEMBLY
 
ME066029 
INJECTION-PUMP ASSEMBLY
 
ME066130 
INJECTION-PUMP ASSEMBLY
8DC81
9 400 618 078 
ME066430 
INJECTION-PUMP ASSEMBLY
8DC81
 
3126036010 
INJECTION-PUMP ASSEMBLY
 
3126038010 
INJECTION-PUMP ASSEMBLY
106871-2052  
9 400 618 079 
ME066131 
INJECTION-PUMP ASSEMBLY
8DC81

Mitsubishi-Heav 

 
0429051960 
INJECTION-PUMP ASSEMBLY
S8A
 
3276500060 
INJECTION-PUMP ASSEMBLY
S8A
9 400 618 080 
3276500061 
INJECTION-PUMP ASSEMBLY
S8A

Mitsubishi 

 
3126031010 
INJECTION-PUMP ASSEMBLY
9 400 618 081 
ME066128 
INJECTION-PUMP ASSEMBLY
8DC9
 
3126032020 
INJECTION-PUMP ASSEMBLY
 
ME066126 
INJECTION-PUMP ASSEMBLY
8DC9
 
ME066429 
INJECTION-PUMP ASSEMBLY
8DC9
9 400 618 082 
ME066072 
INJECTION-PUMP ASSEMBLY
8DC9
Back to top