106672-3702 ZEXEL 9 400 619 865 BOSCH INJECTION-PUMP ASSEMBLY 9400619865 1066723702 220204572a


106672-3702 INJECTION-PUMP ASSEMBLY
Rating:
13
Buy INJECTION-PUMP ASSEMBLY 106672-3702 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH 9 400 619 865 9400619865
ZEXEL 106672-3702 1066723702
HINO 220204572A 220204572a

Service parts 106672-3702 INJECTION-PUMP ASSEMBLY:

1. _
2. FUEL INJECTION PUMP 106067-0840
3. GOVERNOR 105407-6260
4. SUPPLY PUMP 105217-1301
5. AUTOM. ADVANCE MECHANIS
6. COUPLING PLATE 105662-0910
7. COUPLING PLATE
8. _
9. _
10. NOZZLE AND HOLDER ASSY 105101-5531
11. Nozzle and Holder
12. Open Pre:MPa(Kqf/cm2) 21.6(220)
13. NOZZLE-HOLDER 105030-4100
14. NOZZLE 105015-7220
15. NOZZLE SET

Include in #1:

106672-3702 as INJECTION-PUMP ASSEMBLY

Cross reference number

BOSCH 9 400 619 865 9400619865
ZEXEL 106672-3702 1066723702
HINO 220204572A 220204572a


Zexel num
Bosch num
Firm num
Name
106672-3702 
106672-3703 
9 400 619 865 
220204572A  HINO
INJECTION-PUMP ASSEMBLY
P09C-T * K

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil
  ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8140
Bosch type code   EF8511/9A
Nozzle   105780-0000
Bosch type code   DN12SD12T
Nozzle holder   105780-2080
Bosch type code   EF8511/9
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm)
mm   8-3-600
Overflow valve   134424-1420
Overflow valve opening pressure kPa   162 147 177
Overflow valve opening pressure kgf/cm2   1.65 1.5 1.8
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
Direction of rotation (viewed from drive side)
Right
  R
Injection timing adjustment
Direction of rotation (viewed from drive side)
Right
  R
Injection order   1-4-2-6- 3-5
Pre-stroke mm   4.5 4.4 4.5
Beginning of injection position
Drive side
  NO.1
Difference between angles 1
Cal 1-4
deg.   60 59.5 60.5
Difference between angles 2
Cyl.1-2
deg.   120 119.5 120.5
Difference between angles 3
Cal 1-6
deg.   180 179.5 180.5
Difference between angles 4
Cal 1-3
deg.   240 239.5 240.5
Difference between angles 5
Cal 1-5
deg.   300 299.5 300.5
Injection quantity adjustment
Adjusting point   A
Rack position   10.2
Pump speed r/min   800 800 800
Average injection quantity mm3/st.   132.5 130.5 134.5
Max. variation between cylinders %   0 -2 2
Basic   *
Fixing the lever   *
Boost pressure kPa   24 24
Boost pressure mmHg   180 180
Injection quantity adjustment_02
Adjusting point   C
Rack position   6.4+-0.5
Pump speed r/min   400 400 400
Average injection quantity mm3/st.   11 8 14
Max. variation between cylinders %   0 -15 15
Fixing the rack   *
Boost pressure kPa   0 0 0
Boost pressure mmHg   0 0 0
Injection quantity adjustment_03
Adjusting point   D
Rack position   R1-0.7
Pump speed r/min   600 600 600
Average injection quantity mm3/st.   117.5 111.5 123.5
Fixing the lever   *
Boost pressure kPa   0 0 0
Boost pressure mmHg   0 0 0
Injection quantity adjustment_04
Adjusting point   E
Rack position   -
Pump speed r/min   100 100 100
Average injection quantity mm3/st.   134 129 139
Fixing the lever   *
Boost pressure kPa   0 0 0
Boost pressure mmHg   0 0 0
Rack limit   *
Boost compensator adjustment
Pump speed r/min   600 600 600
Rack position   R1-0.7
Boost pressure kPa   3.3 3.3 5.3
Boost pressure mmHg   25 25 40
Boost compensator adjustment_02
Pump speed r/min   600 600 600
Rack position   R1(10.2)
Boost pressure kPa   10.7 10.7 10.7
Boost pressure mmHg   80 80 80

Test data Ex:

Governor adjustment

Test data 106672-3702
N:Pump speed R:Rack position (mm) (1)Target notch: K (2)Tolerance for racks not indicated: +-0.05mm. (3)RACK LIMIT (4)Boost compensator stroke: BCL (5)Main spring setting (6)Set idle sub-spring
----------
K=8 BCL=0.7+-0.1mm
----------

Speed control lever angle

Test data 106672-3702
F:Full speed I:Idle (1)Stopper bolt setting
----------

----------
a=1deg+-5deg b=18deg+-5deg

Stop lever angle

Test data 106672-3702
N:Pump normal S:Stop the pump. (1)Pump speed aa and rack position bb (to be sealed at delivery)
----------
aa=0r/min bb=1-0.5mm
----------
a=25deg+-5deg b=70deg+-5deg

Timing setting

Test data 106672-3702
(1)Pump vertical direction (2)Coupling's key groove position at No 1 cylinder's beginning of injection (3)- (4)-
----------

----------
a=(50deg)




Have questions with 106672-3702?





Group cross 106672-3702 ZEXEL

Hino 

 
220204570A 
INJECTION-PUMP ASSEMBLY
P09C-T
 
220204571A 
INJECTION-PUMP ASSEMBLY
P09C-T
106672-3702  

106672-3703 
9 400 619 865 
220204572A 
INJECTION-PUMP ASSEMBLY
P09C-T
9 400 617 109 
220204572B 
INJECTION-PUMP ASSEMBLY
P09C-T
F 019 Z20 110 
220204572C 
INJECTION-PUMP ASSEMBLY
P09C-T
Back to top