106671-8040 ZEXEL 9 400 610 326 BOSCH INJECTION-PUMP ASSEMBLY 9400610326 1066718040 220005650a


106671-8040 INJECTION-PUMP ASSEMBLY
Rating:
20
Buy INJECTION-PUMP ASSEMBLY 106671-8040 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH 9 400 610 326 9400610326
ZEXEL 106671-8040 1066718040
HINO 220005650A 220005650a

Service parts 106671-8040 INJECTION-PUMP ASSEMBLY:

1. _
2. FUEL INJECTION PUMP 106060-5340
3. GOVERNOR 105489-0970
4. SUPPLY PUMP 105217-1301
5. AUTOM. ADVANCE MECHANIS 105635-0111
6. COUPLING PLATE 105662-0850
7. COUPLING PLATE
8. _
9. _
10. NOZZLE AND HOLDER ASSY 105100-5031
11. Nozzle and Holder 23600-1221A
12. Open Pre:MPa(Kqf/cm2) 21.6{220}
13. NOZZLE-HOLDER 105031-5300
14. NOZZLE 105015-4640
15. NOZZLE SET

Include in #1:

106671-8040 as INJECTION-PUMP ASSEMBLY

Cross reference number

BOSCH 9 400 610 326 9400610326
ZEXEL 106671-8040 1066718040
HINO 220005650A 220005650a


Zexel num
Bosch num
Firm num
Name
106671-8040 
106671-8150 
9 400 610 326 
220005650A  HINO
INJECTION-PUMP ASSEMBLY
EK100 * K

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil
  ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8140
Bosch type code   EF8511/9A
Nozzle   105780-0000
Bosch type code   DN12SD12T
Nozzle holder   105780-2080
Bosch type code   EF8511/9
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm)
mm   8-3-600
Overflow valve   134424-0920
Overflow valve opening pressure kPa   162 147 177
Overflow valve opening pressure kgf/cm2   1.65 1.5 1.8
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
Direction of rotation (viewed from drive side)
Left
  L
Injection timing adjustment
Direction of rotation (viewed from drive side)
Left
  L
Injection order   1-4-2-6- 3-5
Pre-stroke mm   3.3 3.24 3.3
Beginning of injection position
Drive side
  NO.1
Difference between angles 1
Cal 1-4
deg.   60 59.75 60.25
Difference between angles 2
Cyl.1-2
deg.   120 119.75 120.25
Difference between angles 3
Cal 1-6
deg.   180 179.75 180.25
Difference between angles 4
Cal 1-3
deg.   240 239.75 240.25
Difference between angles 5
Cal 1-5
deg.   300 299.75 300.25
Injection quantity adjustment
Adjusting point   A
Rack position   9.9
Pump speed r/min   500 500 500
Average injection quantity mm3/st.   125.5 122.5 128.5
Max. variation between cylinders %   0 -4 4
Fixing the lever   *
Injection quantity adjustment_02
Adjusting point   B
Rack position   10.5
Pump speed r/min   700 700 700
Average injection quantity mm3/st.   141.2 139.2 143.2
Max. variation between cylinders %   0 -2 2
Basic   *
Fixing the lever   *
Injection quantity adjustment_03
Adjusting point   C
Rack position   10.9
Pump speed r/min   1150 1150 1150
Average injection quantity mm3/st.   149.7 146.7 152.7
Max. variation between cylinders %   0 -4 4
Fixing the lever   *
Injection quantity adjustment_04
Adjusting point   D
Rack position   7+-0.5
Pump speed r/min   225 225 225
Average injection quantity mm3/st.   16 13 19
Max. variation between cylinders %   0 -15 15
Fixing the rack   *
Injection quantity adjustment_05
Adjusting point   E
Rack position   -
Pump speed r/min   100 100 100
Average injection quantity mm3/st.   135 135 155
Fixing the lever   *
Rack limit   *
Timer adjustment
Pump speed r/min   1000--
Advance angle deg.   0 0 0
Remarks
Start
 
Timer adjustment_02
Pump speed r/min   950
Advance angle deg.   0.5
Timer adjustment_03
Pump speed r/min   1000
Advance angle deg.   1.5
Timer adjustment_04
Pump speed r/min   1050
Advance angle deg.   1.9 1.4 2.4
Timer adjustment_05
Pump speed r/min   1150
Advance angle deg.   4.5 4.2 4.8
Remarks
Finish
 

Test data Ex:

Governor adjustment

Test data 106671-8040
N:Pump speed R:Rack position (mm) (1)Lever ratio: RT (2)Target shim dimension: TH (3)RACK LIMIT (4)Damper spring setting: DL
----------
RT=1 TH=2mm DL=6.2-0.2mm
----------

Speed control lever angle

Test data 106671-8040
F:Full speed
----------

----------
a=15deg+-5deg

0000000901

Test data 106671-8040
F:Full load I:Idle (1)Stopper bolt setting
----------

----------
a=10deg+-5deg b=25deg+-3deg

Stop lever angle

Test data 106671-8040
N:Pump normal S:Stop the pump.
----------

----------
a=15deg+-5deg b=64deg+-5deg

Timing setting

Test data 106671-8040
(1)Pump vertical direction (2)Coupling's key groove position at No 1 cylinder's beginning of injection (3)- (4)-
----------

----------
a=(0deg)




Have questions with 106671-8040?





Group cross 106671-8040 ZEXEL

Hino 

9 400 616 966 
220005410A 
INJECTION-PUMP ASSEMBLY
EK100
 
220202920A 
INJECTION-PUMP ASSEMBLY
EP100T
 
220005430A 
INJECTION-PUMP ASSEMBLY
EP100
 
220005431A 
INJECTION-PUMP ASSEMBLY
EP100
9 400 616 967 
220005431B 
INJECTION-PUMP ASSEMBLY
EP100
 
220005600A 
INJECTION-PUMP ASSEMBLY
EK200
9 400 616 968 
220005600B 
INJECTION-PUMP ASSEMBLY
EK200
106671-8040  

106671-8150 
9 400 610 326 
220005650A 
INJECTION-PUMP ASSEMBLY
EK100
9 400 616 969 
220005900A 
INJECTION-PUMP ASSEMBLY
EK100
 
 
INJECTION-PUMP ASSEMBLY
EP100TI
9 400 616 970 
220203060A 
INJECTION-PUMP ASSEMBLY
EP100TI
 
220005920A 
INJECTION-PUMP ASSEMBLY
K13C
9 400 616 971 
220005921A 
INJECTION-PUMP ASSEMBLY
K13C
9 400 619 662 
 
INJECTION-PUMP ASSEMBLY

Hino 

9 400 616 972 
220203051A 
INJECTION-PUMP ASSEMBLY
EP100-T
 
220005950A 
INJECTION-PUMP ASSEMBLY
K13C
 
220005951A 
INJECTION-PUMP ASSEMBLY
K13C
9 400 616 973 
220005952A 
INJECTION-PUMP ASSEMBLY
K13C
Back to top