106671-2380 ZEXEL Calibration Data 1066712380 3256500080


106671-2380 None
Rating:
31
Buy None 106671-2380 zexel genuine, new aftermarket engine parts with delivery

Information

ZEXEL 106671-2380 1066712380
MITSUBISHI-HEAV 3256500080 3256500080

Cross reference number

ZEXEL 106671-2380 1066712380
MITSUBISHI-HEAV 3256500080 3256500080


Zexel num
Bosch num
Firm num
Name
106671-2380 
 
3256500080  MITSUBISHI-HEAV

S6A *

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil
  ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8140
Bosch type code   EF8511/9A
Nozzle   105780-0000
Bosch type code   DN12SD12T
Nozzle holder   105780-2080
Bosch type code   EF8511/9
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm)
mm   8-3-600
Overflow valve   132424-0620
Overflow valve opening pressure kPa   157 123 191
Overflow valve opening pressure kgf/cm2   1.6 1.25 1.95
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
Direction of rotation (viewed from drive side)
Left
  L
Injection timing adjustment
Direction of rotation (viewed from drive side)
Left
  L
Injection order   1-5-3-6- 2-4
Pre-stroke mm   2.7 2.65 2.75
Rack position
Point A
  R=A
Beginning of injection position
Governor side
  NO.1
Difference between angles 1
Cal 1-5
deg.   60 59.5 60.5
Difference between angles 2
Cal 1-3
deg.   120 119.5 120.5
Difference between angles 3
Cal 1-6
deg.   180 179.5 180.5
Difference between angles 4
Cyl.1-2
deg.   240 239.5 240.5
Difference between angles 5
Cal 1-4
deg.   300 299.5 300.5
Injection quantity adjustment
Adjusting point   A
Rack position   15.2
Pump speed r/min   900 900 900
Average injection quantity mm3/st.   311.8 302.8 320.8
Max. variation between cylinders %   0 -3 3
Basic   *
Fixing the lever   *
Injection quantity adjustment_02
Adjusting point   C
Rack position   6.4+-0.5
Pump speed r/min   250 250 250
Average injection quantity mm3/st.   33.7 30.7 36.7
Max. variation between cylinders %   0 -10 10
Fixing the rack   *
Injection quantity adjustment_03
Adjusting point   D
Rack position   4.5
Pump speed r/min   900 900 900
Average injection quantity mm3/st.   30.9 25.9 35.9
Fixing the rack   *
Injection quantity adjustment_04
Adjusting point   E
Rack position   21+-0.5
Pump speed r/min   100 100 100
Average injection quantity mm3/st.   278 278 328
Fixing the lever   *
Timer adjustment
Pump speed r/min   400
Advance angle deg.   0.5
Timer adjustment_02
Pump speed r/min   700
Advance angle deg.   1.2 0.7 1.7
Timer adjustment_03
Pump speed r/min   -
Advance angle deg.   4 4 4
Remarks
Measure the actual speed, stop
 

Test data Ex:

Governor adjustment

Test data 106671-2380
N:Pump speed R:Rack position (mm) (1)Target notch: K (2)Set idle sub-spring so that it operates from L1.
----------
K=7 L1=4.5-0.5mm
----------

Speed control lever angle

Test data 106671-2380
F:Full speed S:Stop
----------

----------
a=23deg+-5deg b=32deg+-3deg

0000000901

Test data 106671-2380
F:Full load I:Idle S:Stop
----------

----------
a=4deg+-5deg b=29.5deg+-3deg c=13deg+-3deg




Have questions with 106671-2380?





Group cross 106671-2380 ZEXEL

Mitsubishi-Heav 

 
3626107290 
INJECTION-PUMP ASSEMBLY
S6B
 
3256500060 
INJECTION-PUMP ASSEMBLY
S6A
 
3256510060 
INJECTION-PUMP ASSEMBLY
S6A
 
3256510061 
INJECTION-PUMP ASSEMBLY
S6A
9 400 616 748 
3256500180 
INJECTION-PUMP ASSEMBLY
S6A
 
3256502060 
INJECTION-PUMP ASSEMBLY
S6A
 
3256502061 
INJECTION-PUMP ASSEMBLY
S6A
 
3256502160 
INJECTION-PUMP ASSEMBLY
S6A
 
3256502161 
INJECTION-PUMP ASSEMBLY
S6A

Mitsubishi 

9 400 616 749 
ME059510 
INJECTION-PUMP ASSEMBLY
6D22CT

Mitsubishi-Heav 

 
3256500020 
INJECTION-PUMP ASSEMBLY
S6A
 
 
INJECTION-PUMP ASSEMBLY
S6A
 
3256510051 
INJECTION-PUMP ASSEMBLY
S6A
106671-2380  
 
3256500080 

S6A
 
3266510160 
INJECTION-PUMP ASSEMBLY
S12A
 
3266510161 
INJECTION-PUMP ASSEMBLY
S12A
 
3266510162 
INJECTION-PUMP ASSEMBLY
S12A
9 400 613 476 
3266520160 
INJECTION-PUMP ASSEMBLY
S12A
Back to top