104303-5220 ZEXEL 9 400 616 494 BOSCH INJECTION-PUMP ASSEMBLY 9400616494 1043035220 62156000480a


104303-5220 INJECTION-PUMP ASSEMBLY
Rating:
26
Buy INJECTION-PUMP ASSEMBLY 104303-5220 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH 9 400 616 494 9400616494
ZEXEL 104303-5220 1043035220
ISEKI 62156000480A 62156000480a

Service parts 104303-5220 INJECTION-PUMP ASSEMBLY:

1. _
2. FUEL INJECTION PUMP 104300-6470
3. GOVERNOR
4. SUPPLY PUMP
5. AUTOM. ADVANCE MECHANIS
6. COUPLING PLATE
7. COUPLING PLATE
8. _
9. _
10. NOZZLE AND HOLDER ASSY 105118-4950
11. Nozzle and Holder 6215300-0041
12. Open Pre:MPa(Kqf/cm2) 20.6{210}
13. NOZZLE-HOLDER 105048-3490
14. NOZZLE 105017-0200
15. NOZZLE SET

Include in #1:

104303-5220 as INJECTION-PUMP ASSEMBLY

Cross reference number

BOSCH 9 400 616 494 9400616494
ZEXEL 104303-5220 1043035220
ISEKI 62156000480A 62156000480a


Zexel num
Bosch num
Firm num
Name
104303-5220 
104303-5240 
9 400 616 494 
62156000480A  ISEKI
INJECTION-PUMP ASSEMBLY
E3AG1 K

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil
  ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8140
Bosch type code   EF8511/9A
Nozzle   105780-0000
Bosch type code   DN12SD12T
Nozzle holder   105780-2080
Bosch type code   EF8511/9
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm)
mm   6-2-600
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
Direction of rotation (viewed from drive side)
Right
  R
Injection timing adjustment
Direction of rotation (viewed from drive side)
Right
  R
Injection order   1-3-2
Pre-stroke mm   2.8 2.75 2.85
Beginning of injection position
Drive side
  NO.1
Difference between angles 1
Cal 1-3
deg.   120 119.5 120.5
Difference between angles 2
Cyl.1-2
deg.   240 239.5 240.5
Injection quantity adjustment
Adjusting point   A
Rack position   7.9
Pump speed r/min   1250 1250 1250
Average injection quantity mm3/st.   31.8 30.8 32.8
Max. variation between cylinders %   0 -2.5 2.5
Basic   *
Fixing the lever   *
Injection quantity adjustment_02
Adjusting point   -
Rack position   6.8+-0.5
Pump speed r/min   425 425 425
Average injection quantity mm3/st.   6.6 5.6 7.6
Max. variation between cylinders %   0 -14 14
Fixing the lever   *
Remarks
Adjust only variation between cylinders; adjust governor according to governor specifications.
 
Injection quantity adjustment_03
Adjusting point   C
Rack position   11.1+-0. 5
Pump speed r/min   100 100 100
Average injection quantity mm3/st.   50 46 54
Fixing the lever   *
Rack limit   *

Test data Ex:

Governor adjustment

Test data 104303-5220
N:Pump speed R:Rack position (mm) (1)RACK LIMIT (2)Torque control stroke (3)Rack difference from N = N1
----------
N1=1250r/min
----------

Speed control lever angle

Test data 104303-5220
F:Full speed I:Idle (1)Stopper bolt setting
----------

----------
a=12deg+-3deg b=21deg+-6deg

Stop lever angle

Test data 104303-5220
N:Pump normal S:Stop the pump.
----------

----------
a=10deg+-1deg b=(38deg)

Timing setting

Test data 104303-5220
(1)Pump vertical direction (2)Position of gear mark '00' at No 1 cylinder's beginning of injection (3)B.T.D.C.: aa (4)-
----------
aa=18deg
----------
a=(110deg)




Have questions with 104303-5220?





Group cross 104303-5220 ZEXEL

Iseki 

9 400 616 492 
62156000460A 
INJECTION-PUMP ASSEMBLY
E3AD1
9 400 616 493 
62156000470A 
INJECTION-PUMP ASSEMBLY
E3AD1
104303-5220  

104303-5240 
9 400 616 494 
62156000480A 
INJECTION-PUMP ASSEMBLY
E3AG1
 
62156000490A 
INJECTION-PUMP ASSEMBLY
E3AG1
 
62156000710 
INJECTION-PUMP ASSEMBLY
E3AG1
9 400 616 495 
62156000720 
INJECTION-PUMP ASSEMBLY
E3AG1
 
62156000770 
INJECTION-PUMP ASSEMBLY
E3AD1
 
62156000760 
INJECTION-PUMP ASSEMBLY
E3AD1
9 400 616 496 
62156000761A 
INJECTION-PUMP ASSEMBLY
E3AD1
9 400 616 497 
62156000900B 
INJECTION-PUMP ASSEMBLY
E3AG1
Back to top