101608-6190 ZEXEL 9 400 612 421 BOSCH INJECTION-PUMP ASSEMBLY 9400612421 1016086190


101608-6190 INJECTION-PUMP ASSEMBLY
Rating:
68
Buy INJECTION-PUMP ASSEMBLY 101608-6190 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH 9 400 612 421 9400612421
ZEXEL 101608-6190 1016086190

Service parts 101608-6190 INJECTION-PUMP ASSEMBLY:

1. _
2. FUEL INJECTION PUMP 101062-9202
3. GOVERNOR 105401-1121
4. SUPPLY PUMP 105220-5150
5. AUTOM. ADVANCE MECHANIS 105676-1170
6. COUPLING PLATE
7. COUPLING PLATE
8. _
9. _
10. NOZZLE AND HOLDER ASSY 105118-5031
11. Nozzle and Holder ME016655
12. Open Pre:MPa(Kqf/cm2) 21.6{220}
13. NOZZLE-HOLDER 105048-3590
14. NOZZLE 105017-1040
15. NOZZLE SET

Include in #1:

101608-6190 as INJECTION-PUMP ASSEMBLY

Include in #2:

Cross reference number

BOSCH 9 400 612 421 9400612421
ZEXEL 101608-6190 1016086190


Zexel num
Bosch num
Firm num
Name
101608-6190 
101608-6191 
9 400 612 421 
   
INJECTION-PUMP ASSEMBLY
6D34TL * K

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil
  ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8140
Bosch type code   EF8511/9A
Nozzle   105780-0000
Bosch type code   DN12SD12T
Nozzle holder   105780-2080
Bosch type code   EF8511/9
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm)
mm   6-2-600
Overflow valve   131424-5520
Overflow valve opening pressure kPa   255 221 289
Overflow valve opening pressure kgf/cm2   2.6 2.25 2.95
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
Direction of rotation (viewed from drive side)
Right
  R
Injection timing adjustment
Direction of rotation (viewed from drive side)
Right
  R
Injection order   1-5-3-6- 2-4
Pre-stroke mm   3.5 3.45 3.55
Beginning of injection position
Drive side
  NO.1
Difference between angles 1
Cal 1-5
deg.   60 59.5 60.5
Difference between angles 2
Cal 1-3
deg.   120 119.5 120.5
Difference between angles 3
Cal 1-6
deg.   180 179.5 180.5
Difference between angles 4
Cyl.1-2
deg.   240 239.5 240.5
Difference between angles 5
Cal 1-4
deg.   300 299.5 300.5
Injection quantity adjustment
Adjusting point   A
Rack position   8.6
Pump speed r/min   1050 1050 1050
Average injection quantity mm3/st.   83.5 82.5 84.5
Max. variation between cylinders %   0 -2.5 2.5
Basic   *
Fixing the lever   *
Boost pressure kPa   57.3 57.3
Boost pressure mmHg   430 430
Injection quantity adjustment_02
Adjusting point   -
Rack position   5.9+-0.5
Pump speed r/min   475 475 475
Average injection quantity mm3/st.   8 6.7 9.3
Max. variation between cylinders %   0 -14 14
Fixing the rack   *
Boost pressure kPa   0 0 0
Boost pressure mmHg   0 0 0
Remarks
Adjust only variation between cylinders; adjust governor according to governor specifications.
 
Injection quantity adjustment_03
Adjusting point   D
Rack position   -
Pump speed r/min   100 100 100
Average injection quantity mm3/st.   65 65 70
Fixing the lever   *
Boost pressure kPa   0 0 0
Boost pressure mmHg   0 0 0
Rack limit   *
Boost compensator adjustment
Pump speed r/min   400 400 400
Rack position   R1-0.35
Boost pressure kPa   37.3 34.6 40
Boost pressure mmHg   280 260 300
Boost compensator adjustment_02
Pump speed r/min   400 400 400
Rack position   R1(8.6)
Boost pressure kPa   46.7 42.7 50.7
Boost pressure mmHg   350 320 380
Timer adjustment
Pump speed r/min   0
Advance angle deg.   2 1.5 2.5
Timer adjustment_02
Pump speed r/min   -
Advance angle deg.   2 1.5 2.5
Remarks
Measure speed (beginning of operation).
 
Timer adjustment_03
Pump speed r/min   750+-25
Advance angle deg.   0 0 0
Remarks
Finish
 

Test data Ex:

Governor adjustment

Test data 101608-6190
N:Pump speed R:Rack position (mm) (1)Target notch: K (2)Tolerance for racks not indicated: +-0.05mm. (3)RACK LIMIT (4)Boost compensator stroke: BCL (5)Set idle sub-spring (6)Main spring setting
----------
K=11 BCL=0.35+-0.1mm
----------

Speed control lever angle

Test data 101608-6190
F:Full speed I:Idle (1)Stopper bolt setting
----------

----------
a=4deg+-5deg b=19deg+-5deg

Stop lever angle

Test data 101608-6190
N:Pump normal S:Stop the pump. (1)Pump speed aa and rack position bb (to be sealed at delivery) (2)Normal
----------
aa=0r/min bb=1-0.5mm
----------
a=21deg+-5deg b=(55deg)

0000001501 TAMPER PROOF

Test data 101608-6190
Tamperproofing-equipped boost compensator cover installation procedure (A) After adjusting the boost compensator, tighten the bolts to remove the heads. (1)Before adjusting the governor and the boost compensator, tighten the screw to the specified torque. (Tightening torque T = T1 maximum) (2)After adjusting the governor and the boost compensator, tighten to the specified torque to break off the bolt heads. (Tightening torque T = T2)
----------
T1=2.5N-m(0.25kgf-m) T2=2.9~4.4N-m(0.3~0.45kgf-m)
----------

Timing setting

Test data 101608-6190
(1)Pump vertical direction (2)Position of gear mark '3' at No 1 cylinder's beginning of injection (3)B.T.D.C.: aa (4)-
----------
aa=14.5deg
----------
a=(130deg)




Have questions with 101608-6190?





Group cross 101608-6190 ZEXEL

 
 
INJECTION-PUMP ASSEMBLY

Mitsubishi 

9 400 615 837 
ME219016 
INJECTION-PUMP ASSEMBLY
6D34T
9 400 615 838 
ME088997 
INJECTION-PUMP ASSEMBLY
6D34T
 
 
INJECTION-PUMP ASSEMBLY
 
 
INJECTION-PUMP ASSEMBLY
 
 
INJECTION-PUMP ASSEMBLY
9 400 611 442 
 
INJECTION-PUMP ASSEMBLY

Mitsubishi 

9 400 611 711 
ME219068 
INJECTION-PUMP ASSEMBLY
6D34T
 
 
INJECTION-PUMP ASSEMBLY
 
 
INJECTION-PUMP ASSEMBLY
 
 
INJECTION-PUMP ASSEMBLY
 
 
INJECTION-PUMP ASSEMBLY
 
 
INJECTION-PUMP ASSEMBLY
9 400 611 606 
 
INJECTION-PUMP ASSEMBLY
6D34TL

Mitsubishi 

9 400 615 839 
ME219069 
INJECTION-PUMP ASSEMBLY
6D34TL
 
 
INJECTION-PUMP ASSEMBLY
 
 
INJECTION-PUMP ASSEMBLY

Mitsubishi 

9 400 615 840 
ME078727 
INJECTION-PUMP ASSEMBLY
6D16TL
 
 
INJECTION-PUMP ASSEMBLY
 
 
INJECTION-PUMP ASSEMBLY
9 400 611 443 
 
INJECTION-PUMP ASSEMBLY
6D16TL
9 400 612 420 
 
INJECTION-PUMP ASSEMBLY
9 400 613 463 
 
INJECTION-PUMP ASSEMBLY

Mitsubishi 

F 019 Z20 013 
ME078752 
INJECTION-PUMP ASSEMBLY
6D16TL
 
 
INJECTION-PUMP ASSEMBLY
9 400 611 263 
 
INJECTION-PUMP ASSEMBLY
6D34T
9 400 612 799 
 
INJECTION-PUMP ASSEMBLY

Mitsubishi 

9 400 613 105 
ME219076 
INJECTION-PUMP ASSEMBLY
6D34T
 
 
INJECTION-PUMP ASSEMBLY
 
 
INJECTION-PUMP ASSEMBLY

Mitsubishi 

9 400 611 712 
ME219105 
INJECTION-PUMP ASSEMBLY
6D34T
101608-6190  

101608-6191 
9 400 612 421 
 
INJECTION-PUMP ASSEMBLY
6D34TL
9 400 612 800 
 
INJECTION-PUMP ASSEMBLY

Mitsubishi 

9 400 615 841 
ME219097 
INJECTION-PUMP ASSEMBLY
6D34TL
Back to top