101608-1970 ZEXEL 9 400 612 920 BOSCH INJECTION-PUMP ASSEMBLY 9400612920 1016081970 me170449


101608-1970 INJECTION-PUMP ASSEMBLY
Rating:
14
Buy INJECTION-PUMP ASSEMBLY 101608-1970 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH 9 400 612 920 9400612920
ZEXEL 101608-1970 1016081970
MITSUBISHI ME170449 me170449

Service parts 101608-1970 INJECTION-PUMP ASSEMBLY:

1. _
2. FUEL INJECTION PUMP 101062-8011
3. GOVERNOR 105932-2950
4. SUPPLY PUMP 105210-6020
5. AUTOM. ADVANCE MECHANIS 105643-1161
6. COUPLING PLATE
7. COUPLING PLATE
8. _
9. _
10. NOZZLE AND HOLDER ASSY 105110-7522
11. Nozzle and Holder ME072745
12. Open Pre:MPa(Kqf/cm2) 15.7{160}/21.6{220}
13. NOZZLE-HOLDER 105041-3031
14. NOZZLE
15. NOZZLE SET 105019-0690

Include in #1:

101608-1970 as INJECTION-PUMP ASSEMBLY

Cross reference number

BOSCH 9 400 612 920 9400612920
ZEXEL 101608-1970 1016081970
MITSUBISHI ME170449 me170449


Zexel num
Bosch num
Firm num
Name
101608-1970 
9 400 612 920 
ME170449  MITSUBISHI
INJECTION-PUMP ASSEMBLY
6D16T7 K 14BF INJECTION PUMP ASSY PE6AD PE

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil
  ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8260
Bosch type code   9 430 610 133
Nozzle   105780-0120
Bosch type code   1 688 901 990
Nozzle holder   105780-2190
Opening pressure MPa   18
Opening pressure kgf/cm2   184
Injection pipe
Outer diameter - inner diameter - length (mm)
mm   6-2-600
Overflow valve   131424-8420
Overflow valve opening pressure kPa   255 221 289
Overflow valve opening pressure kgf/cm2   2.6 2.25 2.95
Tester oil delivery pressure kPa   255 255 255
Tester oil delivery pressure kgf/cm2   2.6 2.6 2.6
Direction of rotation (viewed from drive side)
Left
  L
Injection timing adjustment
Direction of rotation (viewed from drive side)
Left
  L
Injection order   1-5-3-6- 2-4
Pre-stroke mm   3.2 3.15 3.25
Beginning of injection position
Governor side
  NO.1
Difference between angles 1
Cal 1-5
deg.   60 59.5 60.5
Difference between angles 2
Cal 1-3
deg.   120 119.5 120.5
Difference between angles 3
Cal 1-6
deg.   180 179.5 180.5
Difference between angles 4
Cyl.1-2
deg.   240 239.5 240.5
Difference between angles 5
Cal 1-4
deg.   300 299.5 300.5
Injection quantity adjustment
Adjusting point   -
Rack position   12.1
Pump speed r/min   700 700 700
Each cylinder's injection qty mm3/st.   110 106.7 113.3
Basic   *
Fixing the rack   *
Standard for adjustment of the maximum variation between cylinders   *
Injection quantity adjustment_02
Adjusting point   Z
Rack position   9.5+-0.5
Pump speed r/min   275 275 275
Each cylinder's injection qty mm3/st.   12.5 10.6 14.4
Fixing the rack   *
Standard for adjustment of the maximum variation between cylinders   *
Injection quantity adjustment_03
Adjusting point   A
Rack position   R1(12.1)
Pump speed r/min   700 700 700
Average injection quantity mm3/st.   110 109 111
Basic   *
Fixing the lever   *
Boost pressure kPa   23.3 23.3
Boost pressure mmHg   175 175
Injection quantity adjustment_04
Adjusting point   B
Rack position   R1+1
Pump speed r/min   1400 1400 1400
Average injection quantity mm3/st.   114.5 110.5 118.5
Fixing the lever   *
Boost pressure kPa   23.3 23.3
Boost pressure mmHg   175 175
Injection quantity adjustment_05
Adjusting point   C
Rack position   R2(R1-0. 4)
Pump speed r/min   500 500 500
Average injection quantity mm3/st.   108.5 104.5 112.5
Fixing the lever   *
Boost pressure kPa   23.3 23.3
Boost pressure mmHg   175 175
Injection quantity adjustment_06
Adjusting point   D
Rack position   R2-0.35
Pump speed r/min   400 400 400
Average injection quantity mm3/st.   95 91 99
Fixing the lever   *
Boost pressure kPa   0 0 0
Boost pressure mmHg   0 0 0
Injection quantity adjustment_07
Adjusting point   E
Rack position   (R1+0.4)
Pump speed r/min   1100 1100 1100
Average injection quantity mm3/st.   108.5 104.5 112.5
Fixing the lever   *
Boost pressure kPa   23.3 23.3
Boost pressure mmHg   175 175
Boost compensator adjustment
Pump speed r/min   400 400 400
Rack position   R2-0.35
Boost pressure kPa   4 4 6.7
Boost pressure mmHg   30 30 50
Boost compensator adjustment_02
Pump speed r/min   400 400 400
Rack position   R2(R1-0. 4)
Boost pressure kPa   10 10 10
Boost pressure mmHg   75 75 75
Timer adjustment
Pump speed r/min   1000--
Advance angle deg.   0 0 0
Remarks
Start
 
Timer adjustment_02
Pump speed r/min   950
Advance angle deg.   0.5
Timer adjustment_03
Pump speed r/min   1400
Advance angle deg.   3.5 3 4
Remarks
Finish
 

Test data Ex:

Governor adjustment

Test data 101608-1970
N:Pump speed R:Rack position (mm) (1)Torque cam stamping: T1 (2)Tolerance for racks not indicated: +-0.05mm. (3)Boost compensator stroke: BCL
----------
T1=M20 BCL=0.35+-0.1mm
----------

Speed control lever angle

Test data 101608-1970
F:Full speed I:Idle (1)Use the hole at R = aa (2)Stopper bolt set position 'H'
----------
aa=40mm
----------
a=19deg+-5deg b=41.5deg+-3deg

Stop lever angle

Test data 101608-1970
N:Pump normal S:Stop the pump. (1)With the speed lever at Full, set the stopper bolt so that speed = aa and rack position = bb (non-injection rack position). Confirm non-injection. (2)After setting the stopper bolt at the speed lever's idle position, confirm that there is no injection at pump speed cc and rack position dd (non-injection rack position).
----------
aa=1400r/min bb=7-0.5mm cc=285r/min dd=(7.3)mm
----------
a=11.5deg+-5deg b=28deg+-5deg

0000001501 LEVER

Test data 101608-1970
(A) Idle (B) Full speed (C) Base lever (D) Accelerator lever (E) Accelerator lever delivery position 1. Measure speed lever angle (1)Measure the angle when the accelerator lever (D) contacted the base lever (C) at a.
----------

----------
b=41.5deg+-3deg c=19deg+-5deg

Timing setting

Test data 101608-1970
(1)Pump vertical direction (2)Position of timer's tooth at No 1 cylinder's beginning of injection (3)B.T.D.C.: aa (4)-
----------
aa=13deg
----------
a=(1deg)




Have questions with 101608-1970?





Group cross 101608-1970 ZEXEL

Mitsubishi 

9 400 615 828 
ME170440 
INJECTION-PUMP ASSEMBLY
6D17-2
9 400 615 829 
ME170441 
INJECTION-PUMP ASSEMBLY
6D17-2
9 400 611 709 
ME170444 
INJECTION-PUMP ASSEMBLY
6D16
9 400 615 830 
ME170445 
INJECTION-PUMP ASSEMBLY
6D16
9 400 611 519 
ME170446 
INJECTION-PUMP ASSEMBLY
6D16
9 400 615 831 
ME170447 
INJECTION-PUMP ASSEMBLY
6D17-2
9 400 613 158 
ME170448 
INJECTION-PUMP ASSEMBLY
6D17-2
101608-1970  
9 400 612 920 
ME170449 
INJECTION-PUMP ASSEMBLY
6D16T7
9 400 615 832 
ME170450 
INJECTION-PUMP ASSEMBLY
6D16T7
F 01G 09U 1HM 
ME306178 
INJECTION-PUMP ASSEMBLY
6D16T7
9 400 611 710 
ME170451 
INJECTION-PUMP ASSEMBLY
6D16T2
Back to top