101608-1740 ZEXEL 9 400 610 768 BOSCH INJECTION-PUMP ASSEMBLY 9400610768 1016081740


101608-1740 INJECTION-PUMP ASSEMBLY
Rating:
85
Buy INJECTION-PUMP ASSEMBLY 101608-1740 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH 9 400 610 768 9400610768
ZEXEL 101608-1740 1016081740

Service parts 101608-1740 INJECTION-PUMP ASSEMBLY:

1. _
2. FUEL INJECTION PUMP 101061-9900
3. GOVERNOR 105402-2660
4. SUPPLY PUMP 105210-5250
5. AUTOM. ADVANCE MECHANIS 105676-1110
6. COUPLING PLATE
7. COUPLING PLATE
8. _
9. _
10. NOZZLE AND HOLDER ASSY 105118-5031
11. Nozzle and Holder ME016655
12. Open Pre:MPa(Kqf/cm2) 21.6{220}
13. NOZZLE-HOLDER 105048-3590
14. NOZZLE 105017-1040
15. NOZZLE SET

Include in #1:

101608-1740 as INJECTION-PUMP ASSEMBLY

Cross reference number

BOSCH 9 400 610 768 9400610768
ZEXEL 101608-1740 1016081740


Zexel num
Bosch num
Firm num
Name
101608-1740 
101608-1741 
9 400 610 768 
   
INJECTION-PUMP ASSEMBLY
* K 14BE PE6A PE

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil
  ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8140
Bosch type code   EF8511/9A
Nozzle   105780-0000
Bosch type code   DN12SD12T
Nozzle holder   105780-2080
Bosch type code   EF8511/9
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm)
mm   6-2-600
Overflow valve   131424-5520
Overflow valve opening pressure kPa   255 221 289
Overflow valve opening pressure kgf/cm2   2.6 2.25 2.95
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
Direction of rotation (viewed from drive side)
Right
  R
Injection timing adjustment
Direction of rotation (viewed from drive side)
Right
  R
Injection order   1-5-3-6- 2-4
Pre-stroke mm   3.5 3.45 3.55
Beginning of injection position
Drive side
  NO.1
Difference between angles 1
Cal 1-5
deg.   60 59.5 60.5
Difference between angles 2
Cal 1-3
deg.   120 119.5 120.5
Difference between angles 3
Cal 1-6
deg.   180 179.5 180.5
Difference between angles 4
Cyl.1-2
deg.   240 239.5 240.5
Difference between angles 5
Cal 1-4
deg.   300 299.5 300.5
Injection quantity adjustment
Adjusting point   A
Rack position   9.7
Pump speed r/min   850 850 850
Average injection quantity mm3/st.   68 67 69
Max. variation between cylinders %   0 -2.5 2.5
Basic   *
Fixing the lever   *
Injection quantity adjustment_02
Adjusting point   -
Rack position   7.8+-0.5
Pump speed r/min   440 440 440
Average injection quantity mm3/st.   7.5 6.2 8.8
Max. variation between cylinders %   0 -14 14
Fixing the rack   *
Remarks
Adjust only variation between cylinders; adjust governor according to governor specifications.
 
Injection quantity adjustment_03
Adjusting point   D
Rack position   -
Pump speed r/min   100 100 100
Average injection quantity mm3/st.   65 65 70
Fixing the lever   *
Rack limit   *
Timer adjustment
Pump speed r/min   0
Advance angle deg.   2 1.5 2.5
Timer adjustment_02
Pump speed r/min   -
Advance angle deg.   2 1.5 2.5
Remarks
Measure speed (beginning of operation).
 
Timer adjustment_03
Pump speed r/min   850+-25
Advance angle deg.   0 0 0
Remarks
Finish
 

Test data Ex:

Governor adjustment

Test data 101608-1740
N:Pump speed R:Rack position (mm) (1)Notch fixed: K (2)Tolerance for racks not indicated: +-0.05mm. (3)Supplied with torque spring not set. (4)RACK LIMIT (5)Set idle sub-spring (6)Main spring setting
----------
K=10
----------

Speed control lever angle

Test data 101608-1740
F:Full speed I:Idle (1)Stopper bolt setting
----------

----------
a=(6deg)+-5deg b=(24deg)+-5deg

Stop lever angle

Test data 101608-1740
N:Pump normal S:Stop the pump.
----------

----------
a=26.5deg+-5deg b=53deg+-5deg

Timing setting

Test data 101608-1740
(1)Pump vertical direction (2)Position of gear mark '3' at No 1 cylinder's beginning of injection (3)B.T.D.C.: aa (4)-
----------
aa=16deg
----------
a=(130deg)




Have questions with 101608-1740?





Group cross 101608-1740 ZEXEL

9 400 610 766 
 
INJECTION-PUMP ASSEMBLY

Mitsubishi 

9 400 611 201 
ME088987 
INJECTION-PUMP ASSEMBLY
6D34T
9 400 610 767 
 
INJECTION-PUMP ASSEMBLY

Mitsubishi 

9 400 612 036 
ME088988 
INJECTION-PUMP ASSEMBLY
6D34T
 
 
INJECTION-PUMP ASSEMBLY

Mitsubishi 

9 400 615 814 
ME088989 
INJECTION-PUMP ASSEMBLY
6D34T
 
 
INJECTION-PUMP ASSEMBLY

Mitsubishi 

9 400 611 262 
ME078535 
INJECTION-PUMP ASSEMBLY
6D16T
101608-1740  

101608-1741 
9 400 610 768 
 
INJECTION-PUMP ASSEMBLY

Mitsubishi 

9 400 615 815 
ME088995 
INJECTION-PUMP ASSEMBLY
6D34T
9 400 615 816 
ME078650 
INJECTION-PUMP ASSEMBLY
6D16T
 
 
INJECTION-PUMP ASSEMBLY

Mitsubishi 

9 400 615 817 
ME170302 
INJECTION-PUMP ASSEMBLY
6D16T7
9 400 615 818 
ME219005 
INJECTION-PUMP ASSEMBLY
6D34T
9 400 615 819 
ME219006 
INJECTION-PUMP ASSEMBLY
6D34T
 
 
INJECTION-PUMP ASSEMBLY

Mitsubishi 

9 400 611 195 
ME078664 
INJECTION-PUMP ASSEMBLY
6D16TE
Back to top