101603-0871 ZEXEL INJECTION-PUMP ASSEMBLY Calibration Data 1016030871 1156015764


101603-0871 INJECTION-PUMP ASSEMBLY
Rating:
62
Buy INJECTION-PUMP ASSEMBLY 101603-0871 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

ZEXEL 101603-0871 1016030871
ISUZU 1156015764 1156015764

Service parts 101603-0871 INJECTION-PUMP ASSEMBLY:

1. _
2. FUEL INJECTION PUMP 101060-4830
3. GOVERNOR 105931-9260
4. SUPPLY PUMP 105220-5910
5. AUTOM. ADVANCE MECHANIS 105612-3140
6. COUPLING PLATE 105661-0661
7. COUPLING PLATE
8. _
9. _
10. NOZZLE AND HOLDER ASSY 105100-5053
11. Nozzle and Holder 1-15300-105-2
12. Open Pre:MPa(Kqf/cm2) 18.1{185}
13. NOZZLE-HOLDER 105030-3201
14. NOZZLE 105015-4190
15. NOZZLE SET

Include in #1:

101603-0871 as INJECTION-PUMP ASSEMBLY

Cross reference number

ZEXEL 101603-0871 1016030871
ISUZU 1156015764 1156015764


Zexel num
Bosch num
Firm num
Name
101603-0871 
 
1156015764  ISUZU
INJECTION-PUMP ASSEMBLY
6BD1-T * K 14BE PE6A PE

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil
  ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8140
Bosch type code   EF8511/9A
Nozzle   105780-0000
Bosch type code   DN12SD12T
Nozzle holder   105780-2080
Bosch type code   EF8511/9
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm)
mm   6-2-600
Overflow valve   132424-0620
Overflow valve opening pressure kPa   157 123 191
Overflow valve opening pressure kgf/cm2   1.6 1.25 1.95
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
Direction of rotation (viewed from drive side)
Right
  R
Injection timing adjustment
Direction of rotation (viewed from drive side)
Right
  R
Injection order   1-5-3-6- 2-4
Pre-stroke mm   3.4 3.35 3.45
Beginning of injection position
Drive side
  NO.1
Difference between angles 1
Cal 1-5
deg.   60 59.5 60.5
Difference between angles 2
Cal 1-3
deg.   120 119.5 120.5
Difference between angles 3
Cal 1-6
deg.   180 179.5 180.5
Difference between angles 4
Cyl.1-2
deg.   240 239.5 240.5
Difference between angles 5
Cal 1-4
deg.   300 299.5 300.5
Injection quantity adjustment
Adjusting point   -
Rack position   10.5
Pump speed r/min   950 950 950
Average injection quantity mm3/st.   66.2 64.6 67.8
Max. variation between cylinders %   0 -2.5 2.5
Basic   *
Fixing the rack   *
Injection quantity adjustment_02
Adjusting point   -
Rack position   9.6+-0.5
Pump speed r/min   275 275 275
Average injection quantity mm3/st.   9.4 8.1 10.7
Max. variation between cylinders %   0 -14 14
Fixing the rack   *
Remarks
Adjust only variation between cylinders; adjust governor according to governor specifications.
 
Injection quantity adjustment_03
Adjusting point   A
Rack position   R1(10.5)
Pump speed r/min   950 950 950
Average injection quantity mm3/st.   66.2 65.2 67.2
Basic   *
Fixing the lever   *
Injection quantity adjustment_04
Adjusting point   B
Rack position   R1-0.4
Pump speed r/min   1600 1600 1600
Average injection quantity mm3/st.   61.4 59.4 63.4
Fixing the lever   *
Injection quantity adjustment_05
Adjusting point   C
Rack position   R1+0.15
Pump speed r/min   400 400 400
Average injection quantity mm3/st.   43.3 40.1 46.5
Fixing the lever   *
Injection quantity adjustment_06
Adjusting point   I
Rack position   -
Pump speed r/min   150 150 150
Average injection quantity mm3/st.   81 81 86
Fixing the lever   *
Rack limit   *
Timer adjustment
Pump speed r/min   1000
Advance angle deg.   0.5
Timer adjustment_02
Pump speed r/min   1300
Advance angle deg.   0.9 0.4 1.4
Timer adjustment_03
Pump speed r/min   1600
Advance angle deg.   2 1.5 2.5
Remarks
Finish
 

Test data Ex:

Governor adjustment

Test data 101603-0871
N:Pump speed R:Rack position (mm) (1)Torque cam stamping: T1 (2)Tolerance for racks not indicated: +-0.05mm. (3)RACK LIMIT
----------
T1=H10
----------

Speed control lever angle

Test data 101603-0871
F:Full speed I:Idle (1)Stopper bolt set position 'H'
----------

----------
a=19.5deg+-5deg b=34deg+-3deg

Stop lever angle

Test data 101603-0871
N:Pump normal S:Stop the pump.
----------

----------
a=25deg+-5deg b=40deg+-5deg

Timing setting

Test data 101603-0871
(1)Pump vertical direction (2)Position of timer's threaded hole at No 1 cylinder's beginning of injection (3)B.T.D.C.: aa (4)-
----------
aa=14deg
----------
a=(60deg)




Have questions with 101603-0871?





Group cross 101603-0871 ZEXEL

Isuzu 

 
1156018800 
INJECTION-PUMP ASSEMBLY
6SA1
 
1156018801 
INJECTION-PUMP ASSEMBLY
6SA1
 
1156018802 
INJECTION-PUMP ASSEMBLY
6SA1
 
1156018803 
INJECTION-PUMP ASSEMBLY
6SA1
 
1156018411 
INJECTION-PUMP ASSEMBLY
6QA2
 
1156018421 
INJECTION-PUMP ASSEMBLY
6QA2
 
1156018422 
INJECTION-PUMP ASSEMBLY
6QA2
 
1156018710 
INJECTION-PUMP ASSEMBLY
6BD1T
 
1156018720 
INJECTION-PUMP ASSEMBLY
6BD1T
9 400 615 006 
1156018730 
INJECTION-PUMP ASSEMBLY
6BD1
 
1156018740 
INJECTION-PUMP ASSEMBLY
6BD1
 
1156015762 
INJECTION-PUMP ASSEMBLY
6BD1T
101603-0871  
 
1156015764 
INJECTION-PUMP ASSEMBLY
6BD1-T
 
1156019820 
INJECTION-PUMP ASSEMBLY
6SA1
 
1156019821 
INJECTION-PUMP ASSEMBLY
6SA1
9 400 615 007 
1156019822 
INJECTION-PUMP ASSEMBLY
6SA1
Back to top