101602-7530 ZEXEL F 019 Z10 357 BOSCH INJECTION-PUMP ASSEMBLY f019z10357 1016027530 1156026870


101602-7530 INJECTION-PUMP ASSEMBLY
Rating:
55
Buy INJECTION-PUMP ASSEMBLY 101602-7530 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH F 019 Z10 357 f019z10357
ZEXEL 101602-7530 1016027530
ISUZU 1156026870 1156026870

Service parts 101602-7530 INJECTION-PUMP ASSEMBLY:

1. _
2. FUEL INJECTION PUMP 101061-8450
3. GOVERNOR 105419-0970
4. SUPPLY PUMP 105220-5220
5. AUTOM. ADVANCE MECHANIS
6. COUPLING PLATE
7. COUPLING PLATE 156638-4520
8. _
9. _
10. NOZZLE AND HOLDER ASSY 105101-6311
11. Nozzle and Holder 8-97016-146-1
12. Open Pre:MPa(Kqf/cm2) 18.1{185}
13. NOZZLE-HOLDER 105030-4361
14. NOZZLE 105015-8690
15. NOZZLE SET

Include in #1:

101602-7530 as INJECTION-PUMP ASSEMBLY

Include in #2:

Cross reference number

BOSCH F 019 Z10 357 f019z10357
ZEXEL 101602-7530 1016027530
ISUZU 1156026870 1156026870


Zexel num
Bosch num
Firm num
Name
101602-7530 
101602-7531 
F 019 Z10 357 
1156026870  ISUZU
INJECTION-PUMP ASSEMBLY
6BG1-T * K

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil
  ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8140
Bosch type code   EF8511/9A
Nozzle   105780-0000
Bosch type code   DN12SD12T
Nozzle holder   105780-2080
Bosch type code   EF8511/9
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm)
mm   6-2-600
Overflow valve   131424-4920
Overflow valve opening pressure kPa   127 107 147
Overflow valve opening pressure kgf/cm2   1.3 1.1 1.5
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
Direction of rotation (viewed from drive side)
Right
  R
Injection timing adjustment
Direction of rotation (viewed from drive side)
Right
  R
Injection order   1-5-3-6- 2-4
Pre-stroke mm   3.6 3.55 3.65
Beginning of injection position
Drive side
  NO.1
Difference between angles 1
Cal 1-5
deg.   60 59.5 60.5
Difference between angles 2
Cal 1-3
deg.   120 119.5 120.5
Difference between angles 3
Cal 1-6
deg.   180 179.5 180.5
Difference between angles 4
Cyl.1-2
deg.   240 239.5 240.5
Difference between angles 5
Cal 1-4
deg.   300 299.5 300.5
Injection quantity adjustment
Adjusting point   A
Rack position   10.5
Pump speed r/min   1100 1100 1100
Average injection quantity mm3/st.   91 89.5 92.5
Max. variation between cylinders %   0 -2.5 2.5
Basic   *
Fixing the lever   *
Injection quantity adjustment_02
Adjusting point   C
Rack position   7.1+-0.5
Pump speed r/min   365 365 365
Average injection quantity mm3/st.   10 8.7 11.3
Max. variation between cylinders %   0 -14 14
Fixing the rack   *

Test data Ex:

Governor adjustment

Test data 101602-7530
N:Pump speed R:Rack position (mm) (1)Target notch: K (2)Set idle sub-spring (3)Main spring setting
----------
K=17
----------

Speed control lever angle

Test data 101602-7530
F:Full speed I:Idle D:Dead point (1)Use the hole at R = aa (2)Stopper bolt setting
----------
aa=70mm
----------
a=(20deg)+-3deg b=18deg+-1deg c=(21deg)+-5deg

Stop lever angle

Test data 101602-7530
N:Pump normal S:Stop the pump.
----------

----------
a=13deg+-5deg b=53deg+-5deg

0000001501 LEVER

Test data 101602-7530
1. Variable lever adjustment (1)Fix lever (B) in the idle position using bolts (C) and (D). (2)Temporarily fix the lever (A) in the center of the elongated hole. (3)Set the dead point position temporarily and measure the lever angle. (4)Fix the lever (A) at the idle lever angle position using the bolt (E). (5)Lock using bolt (G). (6)After completing idle adjustment, loosen the full side stopper bolt (D). (7)Move the lever (A) in the full speed direction. (8)Fix bolt (D) at full speed position. (9)Finally, measure the lever angle and set the idle stopper bolt (C) stop position.
----------

----------

Timing setting

Test data 101602-7530
(1)Pump vertical direction (2)Position of gear mark 'CC' at No 1 cylinder's beginning of injection (3)B.T.D.C.: aa (4)-
----------
aa=15deg
----------
a=(100deg)




Have questions with 101602-7530?





Group cross 101602-7530 ZEXEL

Isuzu 

F 019 Z10 595 
1156028060 
INJECTION-PUMP ASSEMBLY
6BB1
 
1156028061 
INJECTION-PUMP ASSEMBLY
6BB1
9 400 614 900 
1156028062 
INJECTION-PUMP ASSEMBLY
6BB1
 
1156028080 
INJECTION-PUMP ASSEMBLY
6BG1
9 400 614 901 
1156028081 
INJECTION-PUMP ASSEMBLY
6BG1
 
1156028070 
INJECTION-PUMP ASSEMBLY
6BD1
9 400 614 902 
1156028071 
INJECTION-PUMP ASSEMBLY
6BD1
101602-7530  

101602-7531 
F 019 Z10 357 
1156026870 
INJECTION-PUMP ASSEMBLY
6BG1-T
F 019 Z10 358 
1156026871 
INJECTION-PUMP ASSEMBLY
6BG1-T
F 019 Z10 359 
1156026872 
INJECTION-PUMP ASSEMBLY
6BG1-T
9 400 614 903 
1156026873 
INJECTION-PUMP ASSEMBLY
6BG1-T
 
1156028140 
INJECTION-PUMP ASSEMBLY
6BG1
 
1156028590 
INJECTION-PUMP ASSEMBLY
6BD1
 
1156028591 
INJECTION-PUMP ASSEMBLY
6BD1
9 400 610 585 
1156028592 
INJECTION-PUMP ASSEMBLY
6BD1
9 400 614 904 
1156028520 
INJECTION-PUMP ASSEMBLY
6BD1
9 400 614 905 
1156028530 
INJECTION-PUMP ASSEMBLY
6BD1
9 400 611 432 
1156028540 
INJECTION-PUMP ASSEMBLY
6BD1
9 400 614 906 
1156028560 
INJECTION-PUMP ASSEMBLY
6BD1
Back to top