101495-3424 ZEXEL 9 400 611 319 BOSCH INJECTION-PUMP ASSEMBLY 9400611319 1014953424


101495-3424 INJECTION-PUMP ASSEMBLY
Rating:
73
Buy INJECTION-PUMP ASSEMBLY 101495-3424 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH 9 400 611 319 9400611319
ZEXEL 101495-3424 1014953424

Service parts 101495-3424 INJECTION-PUMP ASSEMBLY:

1. _
2. FUEL INJECTION PUMP 101049-8800
3. GOVERNOR 105400-8940
4. SUPPLY PUMP 105220-5960
5. AUTOM. ADVANCE MECHANIS
6. COUPLING PLATE
7. COUPLING PLATE
8. _
9. _
10. NOZZLE AND HOLDER ASSY 105118-6690
11. Nozzle and Holder 6205-11-3100
12. Open Pre:MPa(Kqf/cm2) 19.6{200}
13. NOZZLE-HOLDER 105048-3300
14. NOZZLE 105017-2660
15. NOZZLE SET

Include in #1:

101495-3424 as INJECTION-PUMP ASSEMBLY

Include in #2:

Cross reference number

BOSCH 9 400 611 319 9400611319
ZEXEL 101495-3424 1014953424


Zexel num
Bosch num
Firm num
Name
101495-3424 
101495-3425 
9 400 611 319 
   
INJECTION-PUMP ASSEMBLY
S4D95L * K 14BC PE4A,5A, PE

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil
  ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8140
Bosch type code   EF8511/9A
Nozzle   105780-0000
Bosch type code   DN12SD12T
Nozzle holder   105780-2080
Bosch type code   EF8511/9
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm)
mm   6-2-600
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
Direction of rotation (viewed from drive side)
Right
  R
Injection timing adjustment
Direction of rotation (viewed from drive side)
Right
  R
Injection order   1-2-4-3
Pre-stroke mm   3.2 3.15 3.25
Beginning of injection position
Drive side
  NO.1
Difference between angles 1
Cyl.1-2
deg.   90 89.5 90.5
Difference between angles 2
Cal 1-4
deg.   180 179.5 180.5
Difference between angles 3
Cal 1-3
deg.   270 269.5 270.5
Injection quantity adjustment
Adjusting point   A
Rack position   11.7
Pump speed r/min   900 900 900
Average injection quantity mm3/st.   83 82 84
Max. variation between cylinders %   0 -2.5 2.5
Basic   *
Fixing the lever   *
Injection quantity adjustment_02
Adjusting point   C
Rack position   8+-0.5
Pump speed r/min   400 400 400
Average injection quantity mm3/st.   8 7 9
Max. variation between cylinders %   0 -15 15
Fixing the rack   *

Test data Ex:

Governor adjustment

Test data 101495-3424
N:Pump speed R:Rack position (mm) (1)Target notch: K (2)Tolerance for racks not indicated: +-0.05mm. (3)At governor adjustment, set the stop lever at the normal position. (4)RACK CAP: R1 (5)Set idle sub-spring
----------
K=7 R1=(17.5)mm
----------

Speed control lever angle

Test data 101495-3424
F:Full speed I:Idle (1)Set the pump speed at aa. ( At delivery ) (2)Set the pump speed at bb. (3)Stopper bolt setting
----------
aa=900r/min bb=750r/min
----------
a=2deg+-5deg b=22deg+-5deg c=6deg+-5deg

Stop lever angle

Test data 101495-3424
N:Pump normal S:Stop the pump. (1)Rack position = aa, speed = bb (stamp at delivery) (2)No return spring
----------
aa=1-0.5mm bb=0r/min
----------
a=27.5deg+-5deg b=(55deg)

Timing setting

Test data 101495-3424
(1)Pump vertical direction (2)Position of key groove at No 1 cylinder's beginning of injection (3)Stamp aligning marks on the pump housing flange. (4)- (5)-
----------

----------
a=58deg+-3deg b=2deg+-30min




Have questions with 101495-3424?





Group cross 101495-3424 ZEXEL

 
 
INJECTION-PUMP ASSEMBLY
 
 
INJECTION-PUMP ASSEMBLY
9 400 611 160 
 
INJECTION-PUMP ASSEMBLY
9 400 611 161 
 
INJECTION-PUMP ASSEMBLY
101495-3424  

101495-3425 
9 400 611 319 
 
INJECTION-PUMP ASSEMBLY
S4D95L

Komatsu 

9 400 612 162 
6205711150 
INJECTION-PUMP ASSEMBLY
S4D95L
9 400 612 455 
 
INJECTION-PUMP ASSEMBLY
9 400 612 927 
 
INJECTION-PUMP ASSEMBLY

Komatsu 

9 400 614 531 
6205711151 
INJECTION-PUMP ASSEMBLY
S4D95LE-2
Back to top