Fuel injectors
  1. Home
  2. injection
  3. #1014953030

101495-3030 ZEXEL INJECTION-PUMP ASSEMBLY Calibration Data 1014953030


101495-3030 INJECTION-PUMP ASSEMBLY
Rating:
20
Buy INJECTION-PUMP ASSEMBLY 101495-3030 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

ZEXEL 101495-3030 1014953030

Cross reference number

ZEXEL 101495-3030 1014953030


Zexel num Bosch num Firm num Firm Name
101495-3030        INJECTION-PUMP ASSEMBLY

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil   ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8140
Bosch type code   EF8511/9A
Nozzle   105780-0000
Bosch type code   DN12SD12T
Nozzle holder   105780-2080
Bosch type code   EF8511/9
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm) mm   6-2-600
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
Direction of rotation (viewed from drive side)
Right   R
Injection timing adjustment
Direction of rotation (viewed from drive side)
Right   R
Injection order   1-2-4-3
Pre-stroke mm   3.6 3.55 3.65
Beginning of injection position
Drive side   NO.1
Difference between angles 1
Cyl.1-2 deg.   90 89.5 90.5
Difference between angles 2
Cal 1-4 deg.   180 179.5 180.5
Difference between angles 3
Cal 1-3 deg.   270 269.5 270.5
Injection quantity adjustment
Adjusting point   A
Rack position   9.6
Pump speed r/min   850 850 850
Average injection quantity mm3/st.   36.5 35.5 37.5
Max. variation between cylinders %   0 -2.5 2.5
Basic   *
Fixing the lever   *
Injection quantity adjustment_02
Adjusting point   -
Rack position   8.2+-0.5
Pump speed r/min   375 375 375
Average injection quantity mm3/st.   6.2 5.2 7.2
Max. variation between cylinders %   0 -15 15
Fixing the rack   *
Remarks
Adjust only variation between cylinders; adjust governor according to governor specifications.  

Test data Ex:

Governor adjustment

Test data 101495-3030
N:Pump speed R:Rack position (mm) (1)Target notch: K (2)RACK CAP: R1 (3)The torque control spring must does not have a set force. (4)Rack difference between N = N1 and N = N2 (5)Idle sub spring setting: L1.
----------
K=12++ R1=(17.5)mm N1=850r/min N2=400r/min L1=7.5-0.5mm
----------

Speed control lever angle

Test data 101495-3030
F:Full speed I:Idle (1)Set the pump speed at aa. ( At delivery ) (2)Stopper bolt setting (3)Pump speed = bb
----------
aa=900r/min bb=750r/min
----------
a=(9deg)+-5deg b=(22deg)+-5deg c=(6deg)+-5deg

Stop lever angle

Test data 101495-3030
N:Pump normal S:Stop the pump. (1)No return spring
----------

----------
a=4deg+-5deg b=53deg+-5deg

Timing setting

Test data 101495-3030
(1)Pump vertical direction (2)Position of key groove at No 1 cylinder's beginning of injection (3)Stamp aligning marks on the pump housing flange. (4)- (5)-
----------

----------
a=59deg36min+-3deg b=0deg24min+-30min




Have questions with 101495-3030?





Group cross 101495-3030 ZEXEL

Komatsu 

101495-3000    6204711190  INJECTION-PUMP ASSEMBLY
4D95L
101495-3010 
101495-3011    6204711650  INJECTION-PUMP ASSEMBLY
4D95L
101495-3011  9 400 614 508  6204711651  INJECTION-PUMP ASSEMBLY
4D95L
101495-3020      INJECTION-PUMP ASSEMBLY

Komatsu 

101495-3021  9 400 614 509  6204711411  INJECTION-PUMP ASSEMBLY
4D95L
101495-3030      INJECTION-PUMP ASSEMBLY

Komatsu 

101495-3031  9 400 614 510  6204711442  INJECTION-PUMP ASSEMBLY
4D95L
101495-3040  9 400 614 511  6204711610  INJECTION-PUMP ASSEMBLY
4D95L
101495-3050  9 400 614 512  6204711711  INJECTION-PUMP ASSEMBLY
4D95L
101495-3060  9 400 614 513  6204711722  INJECTION-PUMP ASSEMBLY
4D95L
101495-3070  9 400 614 514  6204711511  INJECTION-PUMP ASSEMBLY
4D95L
101495-3080    6204711461  INJECTION-PUMP ASSEMBLY
4D95L
101495-3090    6204711521  INJECTION-PUMP ASSEMBLY
4D95L
Back to top