101402-7470 ZEXEL 9 400 611 416 BOSCH INJECTION-PUMP ASSEMBLY 9400611416 1014027470 8972176780


101402-7470 INJECTION-PUMP ASSEMBLY
Rating:
30
Buy INJECTION-PUMP ASSEMBLY 101402-7470 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH 9 400 611 416 9400611416
ZEXEL 101402-7470 1014027470
ISUZU 8972176780 8972176780

Service parts 101402-7470 INJECTION-PUMP ASSEMBLY:

1. _
2. FUEL INJECTION PUMP 101041-8430
3. GOVERNOR 105419-3600
4. SUPPLY PUMP 105220-6250
5. AUTOM. ADVANCE MECHANIS
6. COUPLING PLATE
7. COUPLING PLATE 156638-8420
8. _
9. _
10. NOZZLE AND HOLDER ASSY 105160-4170
11. Nozzle and Holder 1-15300-331-0
12. Open Pre:MPa(Kqf/cm2) 18.1{185}
13. NOZZLE-HOLDER 105030-4361
14. NOZZLE 105025-0290
15. NOZZLE SET

Include in #1:

101402-7470 as INJECTION-PUMP ASSEMBLY

Cross reference number

BOSCH 9 400 611 416 9400611416
ZEXEL 101402-7470 1014027470
ISUZU 8972176780 8972176780


Zexel num
Bosch num
Firm num
Name
101402-7470 
9 400 611 416 
8972176780  ISUZU
INJECTION-PUMP ASSEMBLY
4BG1-T K 14BC INJECTION PUMP ASSY PE4A,5A, PE

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil
  ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8140
Bosch type code   EF8511/9A
Nozzle   105780-0000
Bosch type code   DN12SD12T
Nozzle holder   105780-2080
Bosch type code   EF8511/9
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm)
mm   6-2-600
Overflow valve   131424-4920
Overflow valve opening pressure kPa   127 107 147
Overflow valve opening pressure kgf/cm2   1.3 1.1 1.5
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
Direction of rotation (viewed from drive side)
Right
  R
Injection timing adjustment
Direction of rotation (viewed from drive side)
Right
  R
Injection order   1-3-4-2
Pre-stroke mm   3.4 3.35 3.45
Beginning of injection position
Drive side
  NO.1
Difference between angles 1
Cal 1-3
deg.   90 89.5 90.5
Difference between angles 2
Cal 1-4
deg.   180 179.5 180.5
Difference between angles 3
Cyl.1-2
deg.   270 269.5 270.5
Injection quantity adjustment
Adjusting point   A
Rack position   8.5
Pump speed r/min   1050 1050 1050
Average injection quantity mm3/st.   91.5 90.4 92.6
Max. variation between cylinders %   0 -2 2
Basic   *
Fixing the lever   *
Injection quantity adjustment_02
Adjusting point   -
Rack position   5.8+-0.5
Pump speed r/min   500 500 500
Average injection quantity mm3/st.   8.8 7.4 10.2
Max. variation between cylinders %   0 -14 14
Fixing the rack   *
Remarks
Adjust only variation between cylinders; adjust governor according to governor specifications.
 

Test data Ex:

Governor adjustment

Test data 101402-7470
N:Pump speed R:Rack position (mm) (1)Target notch: K (2)Tolerance for racks not indicated: +-0.05mm. (3)Set idle sub-spring (4)Main spring setting
----------
K=6
----------

Speed control lever angle

Test data 101402-7470
F:Full speed I:Idle (1)Stopper bolt setting
----------

----------
a=2deg+-5deg b=19deg+-5deg

Stop lever angle

Test data 101402-7470
N:Pump normal S:Stop the pump. (1)Normal
----------

----------
a=4.5deg+-5deg b=53deg+-5deg

Timing setting

Test data 101402-7470
(1)Pump vertical direction (2)Position of gear mark 'CC' at No 1 cylinder's beginning of injection (3)B.T.D.C.: aa (4)-
----------
aa=12deg
----------
a=(100deg)




Have questions with 101402-7470?





Group cross 101402-7470 ZEXEL

Isuzu 

9 400 613 967 
8972124880 
INJECTION-PUMP ASSEMBLY
4BG1-T
9 400 613 968 
8972133880 
INJECTION-PUMP ASSEMBLY
4BG1
9 400 613 969 
8972124740 
INJECTION-PUMP ASSEMBLY
4BG1
9 400 613 970 
8972172440 
INJECTION-PUMP ASSEMBLY
4BG1-T
9 400 612 409 
8972176760 
INJECTION-PUMP ASSEMBLY
4BG1-T
9 400 612 410 
8972176770 
INJECTION-PUMP ASSEMBLY
4BG1
9 400 613 971 
8972177850 
INJECTION-PUMP ASSEMBLY
4BG1-T
101402-7470  
9 400 611 416 
8972176780 
INJECTION-PUMP ASSEMBLY
4BG1-T
9 400 611 574 
8972176790 
INJECTION-PUMP ASSEMBLY
4BG1-T
9 400 611 174 
8972198080 
INJECTION-PUMP ASSEMBLY
4BG1
Back to top