101401-1910 ZEXEL 9 400 611 934 BOSCH INJECTION-PUMP ASSEMBLY 9400611934 1014011910


101401-1910 INJECTION-PUMP ASSEMBLY
Rating:
14
Buy INJECTION-PUMP ASSEMBLY 101401-1910 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH 9 400 611 934 9400611934
ZEXEL 101401-1910 1014011910

Service parts 101401-1910 INJECTION-PUMP ASSEMBLY:

1. _
2. FUEL INJECTION PUMP 101041-9110
3. GOVERNOR 105402-2870
4. SUPPLY PUMP 105220-6361
5. AUTOM. ADVANCE MECHANIS 105676-0940
6. COUPLING PLATE
7. COUPLING PLATE
8. _
9. _
10. NOZZLE AND HOLDER ASSY 105118-5031
11. Nozzle and Holder ME016655
12. Open Pre:MPa(Kqf/cm2) 21.6{220}
13. NOZZLE-HOLDER 105048-3590
14. NOZZLE 105017-1040
15. NOZZLE SET

Include in #1:

101401-1910 as INJECTION-PUMP ASSEMBLY

Cross reference number

BOSCH 9 400 611 934 9400611934
ZEXEL 101401-1910 1014011910


Zexel num
Bosch num
Firm num
Name
101401-1910 
101401-1911 
9 400 611 934 
   
INJECTION-PUMP ASSEMBLY
4D34T * K 14BC PE4A,5A, PE

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil
  ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8140
Bosch type code   EF8511/9A
Nozzle   105780-0000
Bosch type code   DN12SD12T
Nozzle holder   105780-2080
Bosch type code   EF8511/9
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm)
mm   6-2-600
Overflow valve   131424-4620
Overflow valve opening pressure kPa   255 221 289
Overflow valve opening pressure kgf/cm2   2.6 2.25 2.95
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
Direction of rotation (viewed from drive side)
Right
  R
Injection timing adjustment
Direction of rotation (viewed from drive side)
Right
  R
Injection order   1-3-4-2
Pre-stroke mm   3.5 3.45 3.55
Beginning of injection position
Drive side
  NO.1
Difference between angles 1
Cal 1-3
deg.   90 89.5 90.5
Difference between angles 2
Cal 1-4
deg.   180 179.5 180.5
Difference between angles 3
Cyl.1-2
deg.   270 269.5 270.5
Injection quantity adjustment
Adjusting point   A
Rack position   10.7
Pump speed r/min   900 900 900
Average injection quantity mm3/st.   76 75 77
Max. variation between cylinders %   0 -2.5 2.5
Basic   *
Fixing the lever   *
Injection quantity adjustment_02
Adjusting point   -
Rack position   8.3+-0.5
Pump speed r/min   445 445 445
Average injection quantity mm3/st.   8 6.7 9.3
Max. variation between cylinders %   0 -14 14
Fixing the rack   *
Remarks
Adjust only variation between cylinders; adjust governor according to governor specifications.
 
Injection quantity adjustment_03
Adjusting point   C
Rack position   11.2++
Pump speed r/min   100 100 100
Average injection quantity mm3/st.   45 45 50
Fixing the lever   *
Rack limit   *
Timer adjustment
Pump speed r/min   0
Advance angle deg.   2.5 2 3
Timer adjustment_02
Pump speed r/min   350
Advance angle deg.   2.5 2 3
Remarks
Start
 
Timer adjustment_03
Pump speed r/min   500
Advance angle deg.   0 0 0
Remarks
Finish
 

Test data Ex:

Governor adjustment

Test data 101401-1910
N:Pump speed R:Rack position (mm) (1)Notch fixed: K (2)Tolerance for racks not indicated: +-0.05mm. (3)Torque spring does not operate. (4)RACK LIMIT (5)Set idle sub-spring (6)Main spring setting (7)Rack difference between N = N1 and N = N2
----------
K=6 N1=900r/min N2=600r/min
----------

Speed control lever angle

Test data 101401-1910
F:Full speed I:Idle (1)Stopper bolt setting
----------

----------
a=2deg+-5deg b=13deg+-5deg

Stop lever angle

Test data 101401-1910
N:Pump normal S:Stop the pump. (1)At solenoid operation and speed = aa, rack position must be bb or less (at voltage cc).
----------
aa=0r/min bb=7.6mm cc=24V
----------
a=27deg+-5deg b=53deg+-5deg

Timing setting

Test data 101401-1910
(1)Pump vertical direction (2)Position of gear mark '3' at No 1 cylinder's beginning of injection (3)B.T.D.C.: aa (4)-
----------
aa=12deg
----------
a=(130deg)




Have questions with 101401-1910?





Group cross 101401-1910 ZEXEL

Mitsubishi 

9 400 611 874 
ME440013 
INJECTION-PUMP ASSEMBLY
4D34T
101401-1910  

101401-1911 
9 400 611 934 
 
INJECTION-PUMP ASSEMBLY
4D34T

Mitsubishi 

9 400 613 325 
ME440015 
INJECTION-PUMP ASSEMBLY
4D34T
 
 
INJECTION-PUMP ASSEMBLY
 
 
INJECTION-PUMP ASSEMBLY
 
 
INJECTION-PUMP ASSEMBLY

Mitsubishi 

9 400 613 645 
ME441020 
INJECTION-PUMP ASSEMBLY
4D34TL
9 400 613 415 
 
INJECTION-PUMP ASSEMBLY
9 400 613 416 
 
INJECTION-PUMP ASSEMBLY
9 400 613 173 
 
INJECTION-PUMP ASSEMBLY
9 400 613 350 
 
INJECTION-PUMP ASSEMBLY

Mitsubishi 

F 019 Z10 923 
ME441030 
INJECTION-PUMP ASSEMBLY
4D34TL
F 01G 09U 1CS 
ME444589 
INJECTION-PUMP ASSEMBLY
4D34TL
 
 
INJECTION-PUMP ASSEMBLY
9 400 613 417 
 
INJECTION-PUMP ASSEMBLY

Mitsubishi 

9 400 613 423 
ME441117 
INJECTION-PUMP ASSEMBLY
4D34TL
F 019 Z10 924 
ME442685 
INJECTION-PUMP ASSEMBLY
4D34TL
Back to top