105031-4870 ZEXEL 9 430 615 922 BOSCH NOZZLE-HOLDER 9430615922 1050314870 1153300810


 

Information nozzle-holder

BOSCH 9 430 615 922 9430615922
ZEXEL 105031-4870 1050314870
ISUZU 1153300810 1153300810
105031-4870 NOZZLE-HOLDER
Rating:
31
Buy NOZZLE-HOLDER 105031-4870 zexel genuine, new aftermarket engine parts with delivery

Scheme ###:

2. [2] 150508-3300 BEARING PIN
3. [1] 150650-5300 NOZZLE-RETAINING NUT
4. [1] 150550-4800 STOP PIN
5. [1] 150562-4400 COMPRESSION SPRING
7. [1] 150570-0400 SPACER BUSHING
8. [1] 150571-0000 SET OF NUTS
10. [1] 150572-0420 STOP PIN
11. [1] 150562-3100 COMPRESSION SPRING
13. [1] 150565-5500 THREADED PIN
14. [1] 150519-4600 UNION NUT
15. [1] 029332-2030 GASKET D25.5&22T1
16. [1] 150567-8500 CAP NUT
18. [1] 139808-0000 EYE BOLT
19. [2] 139508-0000 GASKET D13.2&8.2T1
20. [1] 029300-3100 GASKET
21. [1] 150645-4900 INLET UNION
800S/1. [0] 150523-5000 SHIM D11.5&4.5T0.50
800S/1. [0] 150523-5100 SHIM D11.5&4.5T0.52
800S/1. [0] 150523-5100 SHIM D11.5&4.5T0.52
800S/1. [0] 150523-5200 SHIM D11.5&4.5T0.54
800S/1. [0] 150523-5300 SHIM D11.5&4.5T0.56
800S/1. [0] 150523-5400 SHIM D11.5&4.5T0.58
800S/1. [0] 150523-5500 SHIM D11.5&4.5T0.60
800S/1. [0] 150523-6000 SHIM D11.5&4.5T0.70
800S/1. [0] 150523-6500 SHIM D11.5&4.5T0.80
800S/1. [0] 150523-7000 SHIM D11.5&4.5T0.90
800S/1. [0] 150523-7500 SHIM D11.5&4.5T1.00
800S/1. [0] 150532-6700 SHIM D11.5&4.5T0.1
800S/1. [0] 150532-6800 SHIM D11.5&4.5T0.2
800S/1. [0] 150532-6900 SHIM D11.5&4.5T0.3
800S/1. [0] 150532-7000 SHIM D11.5&4.5T0.4

Cross reference number

Zexel num
Bosch num
Firm num
Name
105031-4870 
105031-4801 
9 430 615 922 
1153300810  ISUZU
NOZZLE-HOLDER
* K 53LZ NH NH




Information:

Introduction
The problem that is identified below does not have a known permanent solution. Until a permanent solution is known, use the solution that is identified below.Problem
The diesel exhaust fluid (DEF) quality sensors are susceptible to seeing the following fault codes.
Table 1
J1939 CDL Code Description
3516-2 3100-2 Aftertreatment #1 DEF Concentration: Erratic, Intermittent or Incorrect
3516-12 3100-12 Aftertreatment #1 DEF Concentration: Failure
3516-16 E1365 High Aftertreatment #1 DEF Concentration
3516-18 E1364 Low Aftertreatment #1 DEF Concentration Solution
The latest software available in SIS has improvements in it related to the DEF quality sensor and these fault codes.
Ensure that the latest engine and aftertreatment software is installed prior to any hardware replacements.
Ensure that the latest DCU software is installed ( 539-3577 Engine Software (24V DCU) or 539-3576 Engine Software (12V DCU)).
In addition to the troubleshooting for these fault codes in SIS web, ensure that DEF quality is checked with both a refractometer and the 466-8796 Test Strips as outlined in Diesel Exhaust Fluid Quality - Test procedure in SIS.
Keep the DEF tank full when machine/engine will not be operated for an extended period of time to help reduce manifold exposure to ammonia gases in the DEF tank.Have seen cases of contamination where the test strips will not detect it if contamination is not hydrocarbon-based. In these instances, the DEF will appear to be cloudy when doing a visual comparison to a good, clean DEF sample.While working through issues related to these particular fault codes, email Blunier_Derek_W to provide troubleshooting information and documentation as to what was found.Information to Provide
PSRPT with histograms
Application History File
All troubleshooting resultsIf the DEF manifold does get replaced, provide the following:
Dealer code
Workorder number
Serial number
Hours at repair
DEF sample collected from top level of tank to be returned along with the DEF manifoldA Send It Back (SIB) will be created to get the DEF manifold returned.Downloading an Application History File
Illustration 1 g06233931
Click the appropriate ECM.
Click "Information".
Click "Warranty Report".
Illustration 2 g06233935
Click "ECM Information".
Click the "Yes" button.
Illustration 3 g06233938
Click "Additional Service".
Click the "Save" button.

Have questions with 105031-4870?





Group cross 105031-4870 ZEXEL

Isuzu 

9 430 615 919 
1153300540 
NOZZLE-HOLDER
9 430 615 296 
1153300541 
NOZZLE-HOLDER
 
 

Isuzu 

9 430 615 920 
1153300421 
NOZZLE-HOLDER
9 430 615 921 
1153300890 
NOZZLE-HOLDER
9 430 615 297 
1153300891 
NOZZLE-HOLDER
9 430 615 428 
 
NOZZLE-HOLDER ASSEMBLY
9 430 616 138 
 
NOZZLE-HOLDER ASSEMBLY
9 430 615 458 
 
NOZZLE-HOLDER ASSEMBLY

Isuzu 

105031-4870  

105031-4801 
9 430 615 922 
1153300810 
NOZZLE-HOLDER
9 430 616 139 
 
NOZZLE-HOLDER ASSEMBLY

Hino 

9 430 615 335 
236201600A 
NOZZLE-HOLDER
Back to top