106971-0690 ZEXEL INJECTION-PUMP ASSEMBLY Calibration Data 1069710690


106971-0690 INJECTION-PUMP ASSEMBLY
Rating:
71
Buy INJECTION-PUMP ASSEMBLY 106971-0690 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

ZEXEL 106971-0690 1069710690

Service parts 106971-0690 INJECTION-PUMP ASSEMBLY:

1. _
2. FUEL INJECTION PUMP 106097-5380
3. GOVERNOR 105487-4000
4. SUPPLY PUMP 105237-1860
5. AUTOM. ADVANCE MECHANIS 105681-0201
6. COUPLING PLATE 105662-0602
7. COUPLING PLATE
8. _
9. _
10. NOZZLE AND HOLDER ASSY 105100-7700
11. Nozzle and Holder 16600-97070
12. Open Pre:MPa(Kqf/cm2) 17.7{180}/21.6{220}
13. NOZZLE-HOLDER 105031-4790
14. NOZZLE 105015-6810
15. NOZZLE SET

Include in #1:

106971-0690 as INJECTION-PUMP ASSEMBLY

Cross reference number

ZEXEL 106971-0690 1069710690


Zexel num
Bosch num
Firm num
Name
106971-0690 
 
   
INJECTION-PUMP ASSEMBLY

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil
  ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8140
Bosch type code   EF8511/9A
Nozzle   105780-0000
Bosch type code   DN12SD12T
Nozzle holder   105780-2080
Bosch type code   EF8511/9
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm)
mm   8-3-600
Overflow valve opening pressure kPa   157 123 191
Overflow valve opening pressure kgf/cm2   1.6 1.25 1.95
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
Direction of rotation (viewed from drive side)
Right
  R
Injection timing adjustment
Direction of rotation (viewed from drive side)
Right
  R
Injection order   10-9-4-3 -6-5-8-7 -2-1
Pre-stroke mm   3.65 3.6 3.7
Beginning of injection position
Governor side
  NO.1
Difference between angles 1
Cal 10-9
deg.   45 44.5 45.5
Difference between angles 2
Cal 10-4
deg.   72 71.5 72.5
Difference between angles 3
Cal 10-3
deg.   117 116.5 117.5
Difference between angles 4
Cal 10-6
deg.   144 143.5 144.5
Difference between angles 5
Cal 10-5
deg.   189 188.5 189.5
Difference between angles 6
Cal 10-8
deg.   216 215.5 216.5
Difference between angles 7
Cal 10-7
deg.   261 260.5 261.5
Difference between angles 8
Cal 10-2
deg.   288 287.5 288.5
Difference between angles 9
Cal 10-1
deg.   333 332.5 333.5
Injection quantity adjustment
Adjusting point   A
Rack position   10.3
Pump speed r/min   650 650 650
Average injection quantity mm3/st.   129.4 128.4 130.4
Max. variation between cylinders %   0 -4 4
Basic   *
Fixing the lever   *
Injection quantity adjustment_02
Adjusting point   B
Rack position   7+-0.5
Pump speed r/min   225 225 225
Average injection quantity mm3/st.   11 9 13
Max. variation between cylinders %   0 -10 10
Fixing the rack   *
Injection quantity adjustment_03
Adjusting point   D
Rack position   6.7+-0.5
Pump speed r/min   290 290 290
Average injection quantity mm3/st.   10 8 12
Fixing the rack   *
Timer adjustment
Pump speed r/min   950--
Advance angle deg.   0 0 0
Load   3/4
Remarks
Start
 
Timer adjustment_02
Pump speed r/min   900
Advance angle deg.   0.5
Load   3/4
Timer adjustment_03
Pump speed r/min   1100
Advance angle deg.   4 3.5 4.5
Load   4/4
Remarks
Finish
 

Test data Ex:

Governor adjustment

Test data 106971-0690
N:Pump speed R:Rack position (mm) (1)Lever ratio: RT (2)Target shim dimension: TH (3)Rack limit using the stop lever: R1 (4)Excess fuel setting for starting: SXL (5)Damper spring setting: DL (6)Variable speed specification: idling adjustment (7)Main spring setting
----------
RT=1 TH=1.5mm R1=12.4+0.2mm SXL=10.3+0.2mm DL=6.5-0.2mm
----------

Speed control lever angle

Test data 106971-0690
F:Full speed I:Idle (1)Pump speed = aa (2)Stopper bolt setting
----------
aa=290r/min
----------
a=(7deg)+-5deg b=(13deg)+-5deg

0000000901

Test data 106971-0690
F:Full load I:Idle (1)Stopper bolt setting
----------

----------
a=18.5deg+-5deg b=26deg+-3deg

Stop lever angle

Test data 106971-0690
N:Pump normal S:Stop the pump. (1)Rack position = aa
----------
aa=12.4+0.2mm
----------
a=4.5deg+-5deg b=30deg+-5deg

Timing setting

Test data 106971-0690
(1)Pump vertical direction (2)Position of the coupling's key groove at the start of injection for the No. 10 cylinder. (3)- (4)-
----------

----------
a=(90deg)




Have questions with 106971-0690?





Group cross 106971-0690 ZEXEL

 
 
INJECTION-PUMP ASSEMBLY

Nissan-Diesel 

9 400 618 638 
1671297009 
INJECTION-PUMP ASSEMBLY
RD10TA
 
 
INJECTION-PUMP ASSEMBLY

Nissan-Diesel 

 
1680197002 
INJECTION-PUMP ASSEMBLY
RF10
 
 
INJECTION-PUMP ASSEMBLY
 
 
INJECTION-PUMP ASSEMBLY

Nissan-Diesel 

9 400 618 639 
1670097105 
INJECTION-PUMP ASSEMBLY
RE10
 
 
INJECTION-PUMP ASSEMBLY
 
 
INJECTION-PUMP ASSEMBLY

Nissan-Diesel 

9 400 618 640 
1670097106 
INJECTION-PUMP ASSEMBLY
RE10
 
 
INJECTION-PUMP ASSEMBLY

Nissan-Diesel 

 
1679097019 
INJECTION-PUMP ASSEMBLY
RE10TA04
 
 
INJECTION-PUMP ASSEMBLY
RE10
 
 
INJECTION-PUMP ASSEMBLY
 
 
INJECTION-PUMP ASSEMBLY

Nissan-Diesel 

9 400 618 641 
1671397107 
INJECTION-PUMP ASSEMBLY
RE10
 
 
INJECTION-PUMP ASSEMBLY
RF10
 
 
INJECTION-PUMP ASSEMBLY
 
 
INJECTION-PUMP ASSEMBLY

Nissan-Diesel 

9 400 618 642 
1671397108 
INJECTION-PUMP ASSEMBLY
RF10
 
 
INJECTION-PUMP ASSEMBLY
 
 
INJECTION-PUMP ASSEMBLY

Nissan-Diesel 

9 400 618 643 
1671397109 
INJECTION-PUMP ASSEMBLY
RF10
106971-0690  
 
 
INJECTION-PUMP ASSEMBLY
 
 
INJECTION-PUMP ASSEMBLY

Nissan-Diesel 

9 400 618 644 
1671397110 
INJECTION-PUMP ASSEMBLY
RF10
Back to top