106971-0320 ZEXEL 9 400 618 622 BOSCH INJECTION-PUMP ASSEMBLY 9400618622 1069710320 1679097016


106971-0320 INJECTION-PUMP ASSEMBLY
Rating:
75
Buy INJECTION-PUMP ASSEMBLY 106971-0320 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH 9 400 618 622 9400618622
ZEXEL 106971-0320 1069710320
NISSAN-DIESEL 1679097016 1679097016

Service parts 106971-0320 INJECTION-PUMP ASSEMBLY:

1. _
2. FUEL INJECTION PUMP 106097-5470
3. GOVERNOR 105407-2590
4. SUPPLY PUMP 105237-6350
5. AUTOM. ADVANCE MECHANIS 105636-5130
6. COUPLING PLATE
7. COUPLING PLATE
8. _
9. _
10. NOZZLE AND HOLDER ASSY 105101-4760
11. Nozzle and Holder 1660097005
12. Open Pre:MPa(Kqf/cm2) 22.6{230}
13. NOZZLE-HOLDER 105031-4210
14. NOZZLE 105015-3440
15. NOZZLE SET

Include in #1:

106971-0320 as INJECTION-PUMP ASSEMBLY

Cross reference number

BOSCH 9 400 618 622 9400618622
ZEXEL 106971-0320 1069710320
NISSAN-DIESEL 1679097016 1679097016


Zexel num
Bosch num
Firm num
Name
106971-0320 
9 400 618 622 
1679097016  NISSAN-DIESEL
INJECTION-PUMP ASSEMBLY
RE10TA06 K 14CE INJECTION PUMP ASSY PE10P PE

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil
  ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8140
Bosch type code   EF8511/9A
Nozzle   105780-0000
Bosch type code   DN12SD12T
Nozzle holder   105780-2080
Bosch type code   EF8511/9
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm)
mm   8-3-600
Overflow valve   132424-0620
Overflow valve opening pressure kPa   157 123 191
Overflow valve opening pressure kgf/cm2   1.6 1.25 1.95
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
Direction of rotation (viewed from drive side)
Right
  R
Injection timing adjustment
Direction of rotation (viewed from drive side)
Right
  R
Injection order   10-9-4-3 -6-5-8-7 -2-1
Pre-stroke mm   3 2.95 3.05
Beginning of injection position
Governor side
  NO.1
Difference between angles 1
Cal 10-9
deg.   45 44.5 45.5
Difference between angles 2
Cal 10-4
deg.   72 71.5 72.5
Difference between angles 3
Cal 10-3
deg.   117 116.5 117.5
Difference between angles 4
Cal 10-6
deg.   144 143.5 144.5
Difference between angles 5
Cal 10-5
deg.   189 188.5 189.5
Difference between angles 6
Cal 10-8
deg.   216 215.5 216.5
Difference between angles 7
Cal 10-7
deg.   261 260.5 261.5
Difference between angles 8
Cal 10-2
deg.   288 287.5 288.5
Difference between angles 9
Cal 10-1
deg.   333 332.5 333.5
Injection quantity adjustment
Adjusting point   A
Rack position   14.5
Pump speed r/min   1150 1150 1150
Average injection quantity mm3/st.   192.2 190.2 194.2
Max. variation between cylinders %   0 -4 4
Basic   *
Fixing the lever   *
Injection quantity adjustment_02
Adjusting point   B
Rack position   14.5
Pump speed r/min   750 750 750
Average injection quantity mm3/st.   198.4 192.4 204.4
Max. variation between cylinders %   0 -4 4
Fixing the lever   *
Injection quantity adjustment_03
Adjusting point   C
Rack position   7.3+-0.5
Pump speed r/min   300 300 300
Average injection quantity mm3/st.   17.8 15.8 19.8
Max. variation between cylinders %   0 -10 10
Fixing the rack   *
Injection quantity adjustment_04
Adjusting point   D
Rack position   15.5
Pump speed r/min   100 100 100
Average injection quantity mm3/st.   215 205 225
Fixing the lever   *
Rack limit   *
Timer adjustment
Pump speed r/min   (700)
Advance angle deg.   0.5
Timer adjustment_02
Pump speed r/min   1150
Advance angle deg.   3 2.5 3.5
Timer adjustment_03
Pump speed r/min   1250
Advance angle deg.   3.5 3.5 3.5
Remarks
Finish
 

Test data Ex:

Governor adjustment

Test data 106971-0320
N:Pump speed R:Rack position (mm) (1)Target notch: K (2)Tolerance for racks not indicated: +-0.05mm. (3)RACK LIMIT: RAL (4)Damper spring setting: DL
----------
K=12 RAL=15.5+-0.1mm DL=6.8-0.2mm
----------

Speed control lever angle

Test data 106971-0320
F:Full speed I:Idle S:Stop
----------

----------
a=13deg+-5deg b=32deg+-3deg c=34deg+-5deg

Stop lever angle

Test data 106971-0320
N:Pump normal S:Stop the pump. (1)Use the hole at R = aa
----------
aa=55mm
----------
a=27deg+-5deg b=53deg+-5deg

0000001501 GOV FULL LOAD ADJUSTMENT

Test data 106971-0320
Title1:Full load stopper adjustment Title2:Governor set speed LABEL1:Distinguishing LABEL2:Pump speed (r/min) LABEL3:Ave. injection quantity (mm3/st) LABEL4:Max. var. bet. cyl. LABEL5:Remarks LABEL6:Distinguishing LABEL7:Governor set speed (r/min) LABEL8:Remarks (1)Adjustment conditions are the same as those for measuring injection quantity. (2)-
----------

----------
a1=M a2=F r1=1150r/min r2=1150r/min Q1=192.2+-2mm3/st Q2=172.6+-2mm3/st c1=+-4% c2=+-4% a3=M a4=F r3=1185r/min r4=1150r/min




Have questions with 106971-0320?





Group cross 106971-0320 ZEXEL

 
 
INJECTION-PUMP ASSEMBLY

Nissan-Diesel 

 
1671397072 
INJECTION-PUMP ASSEMBLY
RD10T
 
 
INJECTION-PUMP ASSEMBLY

Nissan-Diesel 

9 400 618 621 
1671397073 
INJECTION-PUMP ASSEMBLY
RD10T
106971-0320  
9 400 618 622 
1679097016 
INJECTION-PUMP ASSEMBLY
RE10TA06
 
1671397074 
INJECTION-PUMP ASSEMBLY
RE10
 
 
INJECTION-PUMP ASSEMBLY
RE10
 
1670097075 
INJECTION-PUMP ASSEMBLY
RE10
 
1671397075 
INJECTION-PUMP ASSEMBLY
RE10
 
1670097078 
INJECTION-PUMP ASSEMBLY
RE10
 
 
INJECTION-PUMP ASSEMBLY
 
 
INJECTION-PUMP ASSEMBLY

Nissan-Diesel 

9 400 618 623 
1671397076 
INJECTION-PUMP ASSEMBLY
RE10
 
 
INJECTION-PUMP ASSEMBLY
 
 
INJECTION-PUMP ASSEMBLY

Nissan-Diesel 

9 400 618 624 
1670097079 
INJECTION-PUMP ASSEMBLY
RE10
 
 
INJECTION-PUMP ASSEMBLY
RE10
 
 
INJECTION-PUMP ASSEMBLY

Nissan-Diesel 

 
1671397077 
INJECTION-PUMP ASSEMBLY
RE10
Back to top