106971-0162 ZEXEL 9 400 610 137 BOSCH INJECTION-PUMP ASSEMBLY 9400610137 1069710162 1670097067


106971-0162 INJECTION-PUMP ASSEMBLY
Rating:
34
Buy INJECTION-PUMP ASSEMBLY 106971-0162 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH 9 400 610 137 9400610137
ZEXEL 106971-0162 1069710162
NISSAN-DIESEL 1670097067 1670097067

Service parts 106971-0162 INJECTION-PUMP ASSEMBLY:

1. _
2. FUEL INJECTION PUMP 106097-5091
3. GOVERNOR 105306-0780
4. SUPPLY PUMP 105217-4000
5. AUTOM. ADVANCE MECHANIS 105636-0750
6. COUPLING PLATE 105662-0602
7. COUPLING PLATE
8. _
9. _
10. NOZZLE AND HOLDER ASSY 105100-5840
11. Nozzle and Holder 16600-97019
12. Open Pre:MPa(Kqf/cm2) 19.6{200}
13. NOZZLE-HOLDER 105031-4210
14. NOZZLE 105015-5450
15. NOZZLE SET

Include in #1:

106971-0162 as INJECTION-PUMP ASSEMBLY

Cross reference number

BOSCH 9 400 610 137 9400610137
ZEXEL 106971-0162 1069710162
NISSAN-DIESEL 1670097067 1670097067


Zexel num
Bosch num
Firm num
Name
106971-0162 
106971-0163 
9 400 610 137 
1670097067  NISSAN-DIESEL
INJECTION-PUMP ASSEMBLY
RE10 * K

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil
  ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8140
Bosch type code   EF8511/9A
Nozzle   105780-0000
Bosch type code   DN12SD12T
Nozzle holder   105780-2080
Bosch type code   EF8511/9
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm)
mm   8-3-600
Overflow valve opening pressure kPa   157 123 191
Overflow valve opening pressure kgf/cm2   1.6 1.25 1.95
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
Direction of rotation (viewed from drive side)
Right
  R
Injection timing adjustment
Direction of rotation (viewed from drive side)
Right
  R
Injection order   10-9-4-3 -6-5-8-7 -2-1
Pre-stroke mm   3.65 3.6 3.7
Beginning of injection position
Governor side
  NO.1
Difference between angles 1
Cal 10-9
deg.   45 44.5 45.5
Difference between angles 2
Cal 10-4
deg.   72 71.5 72.5
Difference between angles 3
Cal 10-3
deg.   117 116.5 117.5
Difference between angles 4
Cal 10-6
deg.   144 143.5 144.5
Difference between angles 5
Cal 10-5
deg.   189 188.5 189.5
Difference between angles 6
Cal 10-8
deg.   216 215.5 216.5
Difference between angles 7
Cal 10-7
deg.   261 260.5 261.5
Difference between angles 8
Cal 10-2
deg.   288 287.5 288.5
Difference between angles 9
Cal 10-1
deg.   333 332.5 333.5
Injection quantity adjustment
Adjusting point   A
Rack position   10.3
Pump speed r/min   700 700 700
Average injection quantity mm3/st.   107.2 106.2 108.2
Max. variation between cylinders %   0 -4 4
Basic   *
Fixing the lever   *
Injection quantity adjustment_02
Adjusting point   B
Rack position   5.7+-0.5
Pump speed r/min   225 225 225
Average injection quantity mm3/st.   11.3 9.3 13.3
Max. variation between cylinders %   0 -10 10
Fixing the rack   *
Timer adjustment
Pump speed r/min   800--
Advance angle deg.   0 0 0
Remarks
Start
 
Timer adjustment_02
Pump speed r/min   750
Advance angle deg.   0.5
Timer adjustment_03
Pump speed r/min   950
Advance angle deg.   2.2 1.7 2.7
Timer adjustment_04
Pump speed r/min   1150
Advance angle deg.   5.5 5 6
Remarks
Finish
 

Test data Ex:

Governor adjustment

Test data 106971-0162
N:Pump speed R:Rack position (mm) (1)After completing adjustment of the broken line, set the lever at the unbroken line position. (2)Rack limit using the stop lever: R1 (3)Beginning of damper spring operation: DL (4)Rack difference from N = N1
----------
R1=10.6+0.2mm DL=5.7-0.2mm N1=700r/min
----------

0000000901

Test data 106971-0162
F:Full load I:Idle (1)Stopper bolt setting
----------

----------
a=16deg+-5deg b=20deg+-3deg

Stop lever angle

Test data 106971-0162
N:Pump normal S:Stop the pump.
----------

----------
a=12deg+-5deg b=31deg+-5deg

Timing setting

Test data 106971-0162
(1)Pump vertical direction (2)Position of the coupling's key groove at the start of injection for the No. 10 cylinder. (3)- (4)-
----------

----------
a=(90deg)




Have questions with 106971-0162?





Group cross 106971-0162 ZEXEL

Nissan-Diesel 

 
1670097062 
INJECTION-PUMP ASSEMBLY
RE10
106971-0162  

106971-0163 
9 400 610 137 
1670097067 
INJECTION-PUMP ASSEMBLY
RE10
 
 
INJECTION-PUMP ASSEMBLY
RE10
 
 
INJECTION-PUMP ASSEMBLY
 
 
INJECTION-PUMP ASSEMBLY

Nissan-Diesel 

9 400 618 615 
1670097072 
INJECTION-PUMP ASSEMBLY
RE10
Back to top