Fuel injectors
  1. Home
  2. injection
  3. #1068737490

106873-7490 ZEXEL 9 400 618 494 BOSCH INJECTION-PUMP ASSEMBLY 9400618494 1068737490 me098743


106873-7490 INJECTION-PUMP ASSEMBLY
Rating:
65
Buy INJECTION-PUMP ASSEMBLY 106873-7490 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH 9 400 618 494 9400618494
ZEXEL 106873-7490 1068737490
MITSUBISHI ME098743 me098743

Service parts 106873-7490 INJECTION-PUMP ASSEMBLY:

1. _
2. FUEL INJECTION PUMP 106080-7170
3. GOVERNOR 105407-6170
4. SUPPLY PUMP 105237-5570
5. AUTOM. ADVANCE MECHANIS 105636-0620
6. COUPLING PLATE 105663-0390
7. COUPLING PLATE
8. _
9. _
10. NOZZLE AND HOLDER ASSY 105160-4552
11. Nozzle and Holder ME098744
12. Open Pre:MPa(Kqf/cm2) 21.6{220}
13. NOZZLE-HOLDER 105030-4990
14. NOZZLE 105025-1220
15. NOZZLE SET

Include in #1:

106873-7490 as INJECTION-PUMP ASSEMBLY

Cross reference number

BOSCH 9 400 618 494 9400618494
ZEXEL 106873-7490 1068737490
MITSUBISHI ME098743 me098743


Zexel num
Bosch num
Firm num
Name
106873-7490 
9 400 618 494 
ME098743  MITSUBISHI
INJECTION-PUMP ASSEMBLY
8DC9T K 14CD INJECTION PUMP ASSY PE8P PE

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil   ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8140
Bosch type code   EF8511/9A
Nozzle   105780-0000
Bosch type code   DN12SD12T
Nozzle holder   105780-2080
Bosch type code   EF8511/9
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm) mm   8-3-600
Overflow valve   131424-4620
Overflow valve opening pressure kPa   255 221 289
Overflow valve opening pressure kgf/cm2   2.6 2.25 2.95
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
Direction of rotation (viewed from drive side)
Right   R
Injection timing adjustment
Direction of rotation (viewed from drive side)
Right   R
Injection order   1-2-7-3- 4-5-6-8
Pre-stroke mm   4.8 4.75 4.85
Beginning of injection position
Governor side   NO.1
Difference between angles 1
Cyl.1-2 deg.   45 44.5 45.5
Difference between angles 2
Cal 1-7 deg.   90 89.5 90.5
Difference between angles 3
Cal 1-3 deg.   135 134.5 135.5
Difference between angles 4
Cal 1-4 deg.   180 179.5 180.5
Difference between angles 5
Cal 1-5 deg.   225 224.5 225.5
Difference between angles 6
Cal 1-6 deg.   270 269.5 270.5
Difference between angles 7
Cal 1-8 deg.   315 314.5 315.5
Injection quantity adjustment
Adjusting point   A
Rack position   10.1
Pump speed r/min   850 850 850
Average injection quantity mm3/st.   195.5 192.5 198.5
Max. variation between cylinders %   0 -3 3
Basic   *
Fixing the lever   *
Injection quantity adjustment_02
Adjusting point   B
Rack position   5.1+-0.5
Pump speed r/min   250 250 250
Average injection quantity mm3/st.   15 12.4 17.6
Max. variation between cylinders %   0 -15 15
Fixing the rack   *
Injection quantity adjustment_03
Adjusting point   C
Rack position   9.7
Pump speed r/min   900 900 900
Average injection quantity mm3/st.   183 179 187
Max. variation between cylinders %   0 -4 4
Fixing the lever   *
Timer adjustment
Pump speed r/min   900--
Advance angle deg.   0 0 0
Remarks
Start  
Timer adjustment_02
Pump speed r/min   850
Advance angle deg.   0.5
Timer adjustment_03
Pump speed r/min   900
Advance angle deg.   0.8
Timer adjustment_04
Pump speed r/min   -
Advance angle deg.   3 2.5 3.5
Remarks
Measure the actual speed, stop  

Test data Ex:

Governor adjustment

Test data 106873-7490
N:Pump speed R:Rack position (mm) (1)Notch: K (2)Tolerance for racks not indicated: +-0.05mm. (3)RACK LIMIT (4)Rack difference between N = N1 and N = N2 (5)Set idle sub-spring
----------
K=14 N1=850r/min N2=500r/min
----------

Speed control lever angle

Test data 106873-7490
F:Full speed I:Idle (1)Stopper bolt setting
----------

----------
a=9deg+-5deg b=25deg+-5deg

Stop lever angle

Test data 106873-7490
N:Pump normal S:Stop the pump. (1)Right front (2)Right rear
----------

----------
a=19deg+-5deg b=46deg+-5deg c=28deg+-5deg d=53deg+-5deg

Timing setting

Test data 106873-7490
(1)Pump vertical direction (2)Coupling's key groove position at No 1 cylinder's beginning of injection (3)- (4)-
----------

----------
a=(40deg)




Have questions with 106873-7490?





Group cross 106873-7490 ZEXEL

106873-7400  
 
 
INJECTION-PUMP ASSEMBLY
106873-7401  
 
 
INJECTION-PUMP ASSEMBLY

Mitsubishi 

106873-7402  
9 400 618 489 
ME094459 
INJECTION-PUMP ASSEMBLY
8DC9
106873-7410  
9 400 611 040 
ME094444 
INJECTION-PUMP ASSEMBLY
8DC8
106873-7420  
9 400 618 490 
ME094445 
INJECTION-PUMP ASSEMBLY
8DC8
106873-7430  
 
 
INJECTION-PUMP ASSEMBLY

Mitsubishi 

106873-7431  

106873-7700 
9 400 611 041 
ME094489 
INJECTION-PUMP ASSEMBLY
8DC9
106873-7440  
 
 
INJECTION-PUMP ASSEMBLY
106873-7441  
 
 
INJECTION-PUMP ASSEMBLY

Mitsubishi 

106873-7442  
9 400 618 491 
ME094490 
INJECTION-PUMP ASSEMBLY
8DC9
106873-7450  
 
 
INJECTION-PUMP ASSEMBLY

Mitsubishi 

106873-7451  

106873-7620 
9 400 611 042 
ME162863 
INJECTION-PUMP ASSEMBLY
8M20
106873-7460  
9 400 618 492 
ME094474 
INJECTION-PUMP ASSEMBLY
8DC9
106873-7470  
9 400 618 493 
ME094475 
INJECTION-PUMP ASSEMBLY
8DC9
106873-7480  
9 400 611 043 
ME094508 
INJECTION-PUMP ASSEMBLY
8DC9
106873-7490  
9 400 618 494 
ME098743 
INJECTION-PUMP ASSEMBLY
8DC9T
Back to top