106873-2320 ZEXEL 9 400 618 348 BOSCH INJECTION-PUMP ASSEMBLY 9400618348 1068732320 me098626


106873-2320 INJECTION-PUMP ASSEMBLY
Rating:
24
Buy INJECTION-PUMP ASSEMBLY 106873-2320 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH 9 400 618 348 9400618348
ZEXEL 106873-2320 1068732320
MITSUBISHI ME098626 me098626

Service parts 106873-2320 INJECTION-PUMP ASSEMBLY:

1. _
2. FUEL INJECTION PUMP 106087-7840
3. GOVERNOR 105407-4670
4. SUPPLY PUMP 105237-5570
5. AUTOM. ADVANCE MECHANIS 105636-1970
6. COUPLING PLATE 105663-0390
7. COUPLING PLATE
8. _
9. _
10. NOZZLE AND HOLDER ASSY 105100-4972
11. Nozzle and Holder
12. Open Pre:MPa(Kqf/cm2) 21.6{220}
13. NOZZLE-HOLDER 105030-4990
14. NOZZLE 105015-4580
15. NOZZLE SET

Include in #1:

106873-2320 as INJECTION-PUMP ASSEMBLY

Cross reference number

BOSCH 9 400 618 348 9400618348
ZEXEL 106873-2320 1068732320
MITSUBISHI ME098626 me098626


Zexel num
Bosch num
Firm num
Name
106873-2320 
9 400 618 348 
ME098626  MITSUBISHI
INJECTION-PUMP ASSEMBLY
8DC9TC K 14CD INJECTION PUMP ASSY PE8P PE

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil
  ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8140
Bosch type code   EF8511/9A
Nozzle   105780-0000
Bosch type code   DN12SD12T
Nozzle holder   105780-2080
Bosch type code   EF8511/9
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm)
mm   8-3-600
Overflow valve   131424-4620
Overflow valve opening pressure kPa   255 221 289
Overflow valve opening pressure kgf/cm2   2.6 2.25 2.95
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
Direction of rotation (viewed from drive side)
Right
  R
Injection timing adjustment
Direction of rotation (viewed from drive side)
Right
  R
Injection order   1-2-7-3- 4-5-6-8
Pre-stroke mm   3.9 3.85 3.95
Beginning of injection position
Governor side
  NO.1
Difference between angles 1
Cyl.1-2
deg.   45 44.5 45.5
Difference between angles 2
Cal 1-7
deg.   90 89.5 90.5
Difference between angles 3
Cal 1-3
deg.   135 134.5 135.5
Difference between angles 4
Cal 1-4
deg.   180 179.5 180.5
Difference between angles 5
Cal 1-5
deg.   225 224.5 225.5
Difference between angles 6
Cal 1-6
deg.   270 269.5 270.5
Difference between angles 7
Cal 1-8
deg.   315 314.5 315.5
Injection quantity adjustment
Adjusting point   A
Rack position   10.3
Pump speed r/min   900 900 900
Average injection quantity mm3/st.   132 129 135
Max. variation between cylinders %   0 -3 3
Basic   *
Fixing the lever   *
Injection quantity adjustment_02
Adjusting point   B
Rack position   5.8+-0.5
Pump speed r/min   300 300 300
Average injection quantity mm3/st.   25 22.4 27.6
Max. variation between cylinders %   0 -15 15
Fixing the rack   *
Injection quantity adjustment_03
Adjusting point   C
Rack position   -
Pump speed r/min   100 100 100
Average injection quantity mm3/st.   295 295 305
Fixing the lever   *
Rack limit   *
Timer adjustment
Pump speed r/min   900++
Advance angle deg.   0 0 0
Remarks
Do not advance until starting N = 900.
 
Timer adjustment_02
Pump speed r/min   900
Advance angle deg.   0.5
Timer adjustment_03
Pump speed r/min   -
Advance angle deg.   1 1 1
Remarks
Measure the actual speed, stop
 

Test data Ex:

Governor adjustment

Test data 106873-2320
N:Pump speed R:Rack position (mm) (1)Target notch: K (2)Tolerance for racks not indicated: +-0.05mm. (3)RACK LIMIT (4)Idle sub spring setting: L1.
----------
K=12 L1=5.3-0.5mm
----------

Speed control lever angle

Test data 106873-2320
F:Full speed I:Idle (1)Set the pump speed at aa. (At delivery) (2)Pump speed = bb (3)Stopper bolt setting
----------
aa=910r/min bb=755r/min
----------
a=7deg+-5deg b=35deg+-5deg c=8deg+-5deg

Stop lever angle

Test data 106873-2320
N:Pump normal S:Stop the pump. (1)Normal
----------

----------
a=19deg+-5deg b=46deg+-5deg

Timing setting

Test data 106873-2320
(1)Pump vertical direction (2)Coupling's key groove position at No 1 cylinder's beginning of injection (3)- (4)-
----------

----------
a=(40deg)




Have questions with 106873-2320?





Group cross 106873-2320 ZEXEL

 
 
INJECTION-PUMP ASSEMBLY

Mitsubishi 

9 400 618 347 
ME091726 
INJECTION-PUMP ASSEMBLY
8DC10
 
ME092068 
INJECTION-PUMP ASSEMBLY
8DC11
106873-2320  
9 400 618 348 
ME098626 
INJECTION-PUMP ASSEMBLY
8DC9TC
F 01G 09U 0AT 
 
INJECTION-PUMP ASSEMBLY

Mitsubishi 

9 400 618 349 
ME092072 
INJECTION-PUMP ASSEMBLY
8DC9T2
 
 
INJECTION-PUMP ASSEMBLY

Mitsubishi 

9 400 618 350 
ME092076 
INJECTION-PUMP ASSEMBLY
8DC9T2
 
 
INJECTION-PUMP ASSEMBLY

Mitsubishi 

9 400 618 351 
ME092080 
INJECTION-PUMP ASSEMBLY
8DC9T2
F 01G 09U 0AU 
 
INJECTION-PUMP ASSEMBLY

Mitsubishi 

9 400 618 352 
ME092071 
INJECTION-PUMP ASSEMBLY
8DC9T7
F 01G 09U 0AV 
 
INJECTION-PUMP ASSEMBLY

Mitsubishi 

9 400 618 353 
ME092075 
INJECTION-PUMP ASSEMBLY
8DC9T7
 
 
INJECTION-PUMP ASSEMBLY

Mitsubishi 

9 400 618 354 
ME092079 
INJECTION-PUMP ASSEMBLY
8DC9T7
9 400 618 355 
ME092074 
INJECTION-PUMP ASSEMBLY
8DC11
Back to top