106871-9390 ZEXEL F 019 Z20 282 BOSCH INJECTION-PUMP ASSEMBLY f019z20282 1068719390

Information Cross number Calibration Data Calibration Data Ex

Price: query
Buy now
Add to cart Go to cart

Rating:

Buy INJECTION-PUMP ASSEMBLY 106871-9390 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH F 019 Z20 282 f019z20282

ZEXEL 106871-9390 1068719390

Cross reference number

BOSCH F 019 Z20 282 f019z20282

ZEXEL 106871-9390 1068719390

Zexel num

Bosch num

Firm num

Name

106871-9390

F 019 Z20 282

DPICO

INJECTION-PUMP ASSEMBLY
8DC9T2 Q

Calibration Data:

Adjustment conditions

Test oil
1404 Test oil ISO4113 or {SAEJ967d}

Test oil temperature degC 40 40 45

Nozzle and nozzle holder 105780-8140

Bosch type code EF8511/9A

Nozzle 105780-0000

Bosch type code DN12SD12T

Nozzle holder 105780-2080

Bosch type code EF8511/9

Opening pressure MPa 17.2

Opening pressure kgf/cm2 175

Injection pipe
Outer diameter - inner diameter - length (mm) mm 8-3-600

Overflow valve 131424-4620

Overflow valve opening pressure kPa 255 221 289

Overflow valve opening pressure kgf/cm2 2.6 2.25 2.95

Tester oil delivery pressure kPa 157 157 157

Tester oil delivery pressure kgf/cm2 1.6 1.6 1.6

Direction of rotation (viewed from drive side)
Right R

Injection timing adjustment

Direction of rotation (viewed from drive side)
Right R

Injection order 1-2-7-3- 4-5-6-8

Pre-stroke mm 3.4 3.35 3.45

Beginning of injection position
Governor side NO.1

Difference between angles 1
Cyl.1-2 deg. 45 44.5 45.5

Difference between angles 2
Cal 1-7 deg. 90 89.5 90.5

Difference between angles 3
Cal 1-3 deg. 135 134.5 135.5

Difference between angles 4
Cal 1-4 deg. 180 179.5 180.5

Difference between angles 5
Cal 1-5 deg. 225 224.5 225.5

Difference between angles 6
Cal 1-6 deg. 270 269.5 270.5

Difference between angles 7
Cal 1-8 deg. 315 314.5 315.5

Injection quantity adjustment

Adjusting point -

Rack position 11.2

Pump speed r/min 600 600 600

Each cylinder's injection qty mm3/st. 167 162 172

Basic *

Fixing the rack *

Standard for adjustment of the maximum variation between cylinders *

Injection quantity adjustment_02

Adjusting point C

Rack position 5.1+-0.5

Pump speed r/min 300 300 300

Each cylinder's injection qty mm3/st. 14 11.9 16.1

Fixing the rack *

Standard for adjustment of the maximum variation between cylinders *

Injection quantity adjustment_03

Adjusting point A

Rack position R1(11.2)

Pump speed r/min 600 600 600

Average injection quantity mm3/st. 167 166 168

Basic *

Fixing the lever *

Boost pressure kPa 48 48

Boost pressure mmHg 360 360

Injection quantity adjustment_04

Adjusting point B

Rack position R1+1.1

Pump speed r/min 1000 1000 1000

Average injection quantity mm3/st. 185.5 181.5 189.5

Fixing the lever *

Boost pressure kPa 48 48

Boost pressure mmHg 360 360

Injection quantity adjustment_05

Adjusting point E

Rack position -

Pump speed r/min 100 100 100

Average injection quantity mm3/st. 135 95 175

Fixing the lever *

Boost pressure kPa 0 0 0

Boost pressure mmHg 0 0 0

Boost compensator adjustment

Pump speed r/min 500 500 500

Rack position R2-0.85

Boost pressure kPa 24 22.7 25.3

Boost pressure mmHg 180 170 190

Boost compensator adjustment_02

Pump speed r/min 500 500 500

Rack position R2(R1-0. 2)

Boost pressure kPa 34.7 28 41.4

Boost pressure mmHg 260 210 310

Timer adjustment

Pump speed r/min 650--

Advance angle deg. 0 0 0

Remarks
Start

Timer adjustment_02

Pump speed r/min 600

Advance angle deg. 0.5

Timer adjustment_03

Pump speed r/min 900

Advance angle deg. 4 3.5 4.5

Remarks
Finish

Test data Ex:

Governor adjustment

N:Pump speed R:Rack position (mm) (1)Tolerance for racks not indicated: +-0.05mm. (2)Microswitch not operating at delivery. (3)Boost compensator stroke: BCL (4)Damper spring setting
----------
BCL=0.85+-0.1mm
----------

Speed control lever angle

F:Full speed
----------

----------
a=(15deg)+-5deg

0000000901

F:Full load I:Idle (1)Stopper bolt setting
----------

----------
a=10deg+-5deg b=32deg+-3deg

Stop lever angle

S:Stop the pump. (1)Rack position = aa (2)Stopper bolt setting (3)Free (at delivery) (4)Drive side (5)Use the hole at R = bb
----------
aa=3.5-0.5mm bb=32mm
----------
a=10.5deg+-5deg b=57.5deg+7deg-5deg

0000001501 GOVERNOR TORQUE CONTROL

Dr:Torque control stroke (A): Without torque control spring capsule 1. Adjustment procedures (1)Procedure is the same as that for the RFD (former type), except that the positive torque control stroke must be determined at the full lever setting. 2. Procedures for adjustment (1)Remove the torque control spring capsule. (2)Operate the pump at approximately N1. (End of idling spring operation < N1.) (3)Tilt the lever to the full side. (4)Set so that R = RF. (5)Increase the speed by pushing in the screw (attached to the bracket on the rear of the tension lever) through the adjusting window. (6)Adjust so that the torque control stroke Dr1 can be obtained. (7)Align N2 and N3 with the torque control spring capsule. 3. Final confirmation (1)After final confirmation, temporarily set the load lever to N = N1, R = idling position. (2)From this condition, increase speed to N = N4. (3)Confirm that positive torque control stroke is Dr2.
----------
N1=500r/min N2=(520)r/min N3=(950)r/min N4=1000r/min RF=R2(R1-0.2)mm Dr1=R1+1.1mm Dr2=0+0.3mm
----------

Timing setting

(1)Pump vertical direction (2)Coupling's key groove position at No 1 cylinder's beginning of injection (3)B.T.D.C.: aa (4)-
----------
aa=14deg
----------
a=(40deg)