106871-5670 ZEXEL 9 400 611 546 BOSCH INJECTION-PUMP ASSEMBLY 9400611546 1068715670 1671397875

Information Cross number Calibration Data Calibration Data Ex

Price: query
Buy now
Add to cart Go to cart

Rating:

Buy INJECTION-PUMP ASSEMBLY 106871-5670 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH 9 400 611 546 9400611546

ZEXEL 106871-5670 1068715670

NISSAN-DIESEL 1671397875 1671397875

Service parts 106871-5670 INJECTION-PUMP ASSEMBLY:

1. _

2. FUEL INJECTION PUMP 106080-7640

3. GOVERNOR 105488-2470

4. SUPPLY PUMP 105237-4710

5. AUTOM. ADVANCE MECHANIS 105683-0740

6. COUPLING PLATE 105663-0570

7. COUPLING PLATE

8. _

9. _

10. NOZZLE AND HOLDER ASSY 105110-7070

11. Nozzle and Holder 16600-97079

12. Open Pre:MPa(Kqf/cm2) 17.7{180}/22.6{230}

13. NOZZLE-HOLDER 105041-4020

14. NOZZLE

15. NOZZLE SET 105019-0250

Include in #1:

106871-5670 as INJECTION-PUMP ASSEMBLY

Cross reference number

BOSCH 9 400 611 546 9400611546

ZEXEL 106871-5670 1068715670

NISSAN-DIESEL 1671397875 1671397875

Zexel num

Bosch num

Firm num

Name

106871-5670

9 400 611 546

1671397875 NISSAN-DIESEL

INJECTION-PUMP ASSEMBLY
RF8TD K 14CD INJECTION PUMP ASSY PE8P PE

Calibration Data:

Adjustment conditions

Test oil
1404 Test oil ISO4113 or {SAEJ967d}

Test oil temperature degC 40 40 45

Nozzle and nozzle holder 105780-8140

Bosch type code EF8511/9A

Nozzle 105780-0000

Bosch type code DN12SD12T

Nozzle holder 105780-2080

Bosch type code EF8511/9

Opening pressure MPa 17.2

Opening pressure kgf/cm2 175

Injection pipe
Outer diameter - inner diameter - length (mm) mm 8-3-600

Overflow valve 132424-0620

Overflow valve opening pressure kPa 157 123 191

Overflow valve opening pressure kgf/cm2 1.6 1.25 1.95

Tester oil delivery pressure kPa 157 157 157

Tester oil delivery pressure kgf/cm2 1.6 1.6 1.6

Direction of rotation (viewed from drive side)
Right R

Injection timing adjustment

Direction of rotation (viewed from drive side)
Right R

Injection order 1-8-7-5- 4-3-6-2

Pre-stroke mm 3.9 3.85 3.95

Beginning of injection position
Governor side NO.1

Difference between angles 1
Cal 1-8 deg. 45 44.5 45.5

Difference between angles 2
Cal 1-7 deg. 90 89.5 90.5

Difference between angles 3
Cal 1-5 deg. 135 134.5 135.5

Difference between angles 4
Cal 1-4 deg. 180 179.5 180.5

Difference between angles 5
Cal 1-3 deg. 225 224.5 225.5

Difference between angles 6
Cal 1-6 deg. 270 269.5 270.5

Difference between angles 7
Cyl.1-2 deg. 315 314.5 315.5

Injection quantity adjustment

Adjusting point A

Rack position 11.6

Pump speed r/min 600 600 600

Average injection quantity mm3/st. 211 209 213

Max. variation between cylinders % 0 -4 4

Basic *

Fixing the lever *

Boost pressure kPa 33.3 33.3

Boost pressure mmHg 250 250

Injection quantity adjustment_02

Adjusting point C

Rack position 5.3+-0.5

Pump speed r/min 235 235 235

Average injection quantity mm3/st. 11.5 9.5 13.5

Max. variation between cylinders % 0 -10 10

Fixing the rack *

Boost pressure kPa 0 0 0

Boost pressure mmHg 0 0 0

Injection quantity adjustment_03

Adjusting point E

Rack position 12.1+-0. 1

Pump speed r/min 100 100 100

Average injection quantity mm3/st. 150 150

Fixing the lever *

Boost pressure kPa 33.3 33.3

Boost pressure mmHg 250 250

Rack limit *

Boost compensator adjustment

Pump speed r/min 400 400 400

Rack position R1(8.8)

Boost pressure kPa 5.3 5.3 5.3

Boost pressure mmHg 40 40 40

Boost compensator adjustment_02

Pump speed r/min 400 400 400

Rack position 11.2

Boost pressure kPa 12 10.7 13.3

Boost pressure mmHg 90 80 100

Boost compensator adjustment_03

Pump speed r/min 400 400 400

Rack position 12.1+-0. 1

Boost pressure kPa 20 20 20

Boost pressure mmHg 150 150 150

Timer adjustment

Pump speed r/min 770--

Advance angle deg. 0 0 0

Remarks
Start

Timer adjustment_02

Pump speed r/min 720

Advance angle deg. 0.3

Timer adjustment_03

Pump speed r/min 930

Advance angle deg. 3 2.7 3.3

Remarks
Finish

Test data Ex:

Governor adjustment

N:Pump speed R:Rack position (mm) (1)Tolerance for racks not indicated: +-0.05mm. (2)Boost compensator stroke: BCL (3)Rack limit using stop lever: RA (4)Damper spring setting: DL (5)Rack difference between N = N1 and N = N2 (6)Variable speed specification: idling adjustment (7)Fix the lever at the full-load position at delivery. (8)Main spring setting
----------
BCL=(3.3)mm RA=12.1+-0.1mm DL=4.8-0.2mm N1=1000r/min N2=600r/min
----------

Speed control lever angle

F:Full speed I:Idle (1)Pump speed = aa (2)Set the stopper bolt (fixed at full-load position at delivery.)
----------
aa=290r/min
----------
a=14deg+-5deg b=4deg+-5deg

0000000901

F:Full load I:Idle (1)Stopper bolt setting (2)Use the hole at R = aa
----------
aa=64.3mm
----------
a=18.5deg+-5deg b=33.5deg+-3deg

Stop lever angle

N:Pump normal S:Stop the pump. (1)Rack position = aa (2)Use the pin at R = bb
----------
aa=12.1+-0.1mm bb=46mm
----------
a=36.5deg+-5deg b=38.5deg+-5deg

Timing setting

(1)Pump vertical direction (2)Position of the coupling's key groove at the beginning of injection of the No. 8 cylinder. (3)- (4)-
----------

----------
a=(90deg)