106871-5410 ZEXEL F 01G 09U 09X BOSCH INJECTION-PUMP ASSEMBLY f01g09u09x 1068715410

Information Cross number Calibration Data Calibration Data Ex

Price: query
Buy now
Add to cart Go to cart

Rating:

Buy INJECTION-PUMP ASSEMBLY 106871-5410 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH F 01G 09U 09X f01g09u09x

ZEXEL 106871-5410 1068715410

Service parts 106871-5410 INJECTION-PUMP ASSEMBLY:

1. _

2. FUEL INJECTION PUMP 106080-5730

3. GOVERNOR 105952-1320

4. SUPPLY PUMP 105237-4710

5. AUTOM. ADVANCE MECHANIS 105683-0450

6. COUPLING PLATE 105663-0570

7. COUPLING PLATE

8. _

9. _

10. NOZZLE AND HOLDER ASSY 105110-7630

11. Nozzle and Holder 16600-97119

12. Open Pre:MPa(Kqf/cm2) 15.7{160}/22.6{230}

13. NOZZLE-HOLDER 105041-4180

14. NOZZLE

15. NOZZLE SET 105019-0900

Include in #1:

106871-5410 as INJECTION-PUMP ASSEMBLY

Cross reference number

BOSCH F 01G 09U 09X f01g09u09x

ZEXEL 106871-5410 1068715410

Zexel num

Bosch num

Firm num

Name

106871-5410
106871-5411

F 01G 09U 09X

INJECTION-PUMP ASSEMBLY
* K 14CD PE8P PE

Calibration Data:

Adjustment conditions

Test oil
1404 Test oil ISO4113 or {SAEJ967d}

Test oil temperature degC 40 40 45

Nozzle and nozzle holder 105780-8250

Bosch type code 1 688 901 101

Nozzle 105780-0120

Bosch type code 1 688 901 990

Nozzle holder 105780-2190

Opening pressure MPa 20.7

Opening pressure kgf/cm2 211

Injection pipe
Outer diameter - inner diameter - length (mm) mm 8-3-600

Overflow valve 131425-0120

Overflow valve opening pressure kPa 157 123 191

Overflow valve opening pressure kgf/cm2 1.6 1.25 1.95

Tester oil delivery pressure kPa 255 255 255

Tester oil delivery pressure kgf/cm2 2.6 2.6 2.6

RED3 control unit part number 407910-3 960

RED3 rack sensor specifications mm 19

Direction of rotation (viewed from drive side)
Right R

Injection timing adjustment

Direction of rotation (viewed from drive side)
Right R

Injection order 1-8-7-5- 4-3-6-2

Pre-stroke mm 4.7 4.67 4.73

Beginning of injection position
Governor side NO.1

Difference between angles 1
Cal 1-8 deg. 45 44.75 45.25

Difference between angles 2
Cal 1-7 deg. 90 89.75 90.25

Difference between angles 3
Cal 1-5 deg. 135 134.75 135.25

Difference between angles 4
Cal 1-4 deg. 180 179.75 180.25

Difference between angles 5
Cal 1-3 deg. 225 224.75 225.25

Difference between angles 6
Cal 1-6 deg. 270 269.75 270.25

Difference between angles 7
Cyl.1-2 deg. 315 314.75 315.25

Injection quantity adjustment

Rack position (13.4)

Vist V 1.85 1.85 1.85

Pump speed r/min 650 650 650

Average injection quantity mm3/st. 137 135 139

Max. variation between cylinders % 0 -4 4

Basic *

Injection quantity adjustment_02

Rack position (8.4)

Vist V 2.6 2.5 2.7

Pump speed r/min 335 335 335

Average injection quantity mm3/st. 14 12 16

Max. variation between cylinders % 0 -10 10

Governor adjustment

Pump speed r/min 750--

Advance angle deg. 0 0 0

Remarks
Q = 155+-2 (mm3/st) / N = 650 (r/min), beginning of effect

Governor adjustment_02

Pump speed r/min 700

Advance angle deg. 0.3

Remarks
Q=155+-2(mm3/st)/N=650 (r/min)

Governor adjustment_03

Pump speed r/min (750)

Advance angle deg. 2 1.8 2.2

Remarks
Q=155+-2(mm3/st)/N=650 (r/min)

Governor adjustment_04

Pump speed r/min 850

Advance angle deg. 2 1.7 2.3

Remarks
Q=87+-2(mm3/st)/N=850(r/min)

Governor adjustment_05

Pump speed r/min 1080

Advance angle deg. 7 6.7 7.3

Remarks
Q = 146+-2 (mm3/st) / N = 1100 (r/min), end of effect

Test data Ex:

Speed control lever angle

N:Pump normal S:Stop the pump. (1)Rack position = aa (2)Rack position bb
----------
aa=20mm bb=1mm
----------
a=20deg+-5deg b=37deg+-5deg

0000000901

(1)Pump vertical direction (2)Position of the coupling's key groove at the beginning of injection of the No. 8 cylinder. (3)- (4)-
----------

----------
a=(90deg)

Stop lever angle

(Rs) rack sensor specifications (C/U) control unit part number (V) Rack sensor output voltage (R) Rack position (mm) 1. Confirming governor output characteristics (rack 19 mm, span 6 mm) (1)When the output voltages of the rack sensor are V1 and V2, check that the rack positions R1 and R2 in the table above are satisfied.
----------

----------