106871-5080 ZEXEL INJECTION-PUMP ASSEMBLY Calibration Data 1068715080


106871-5080 INJECTION-PUMP ASSEMBLY
Rating:
42
Buy INJECTION-PUMP ASSEMBLY 106871-5080 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

ZEXEL 106871-5080 1068715080

Service parts 106871-5080 INJECTION-PUMP ASSEMBLY:

1. _
2. FUEL INJECTION PUMP 106080-5380
3. GOVERNOR 105489-4010
4. SUPPLY PUMP 105237-6020
5. AUTOM. ADVANCE MECHANIS 105683-0120
6. COUPLING PLATE 105663-0570
7. COUPLING PLATE
8. _
9. _
10. NOZZLE AND HOLDER ASSY 105110-7040
11. Nozzle and Holder 16600-97078
12. Open Pre:MPa(Kqf/cm2) 17.7{180}/22.6{230}
13. NOZZLE-HOLDER 105041-4020
14. NOZZLE 105015-9240
15. NOZZLE SET

Include in #1:

106871-5080 as INJECTION-PUMP ASSEMBLY

Cross reference number

ZEXEL 106871-5080 1068715080


Zexel num
Bosch num
Firm num
Name
106871-5080 
 
   
INJECTION-PUMP ASSEMBLY

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil
  ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8140
Bosch type code   EF8511/9A
Nozzle   105780-0000
Bosch type code   DN12SD12T
Nozzle holder   105780-2080
Bosch type code   EF8511/9
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm)
mm   8-3-600
Overflow valve   132424-0620
Overflow valve opening pressure kPa   157 123 191
Overflow valve opening pressure kgf/cm2   1.6 1.25 1.95
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
Direction of rotation (viewed from drive side)
Right
  R
Injection timing adjustment
Direction of rotation (viewed from drive side)
Right
  R
Injection order   1-8-7-5- 4-3-6-2
Pre-stroke mm   3.9 3.85 3.95
Beginning of injection position
Governor side
  NO.1
Difference between angles 1
Cal 1-8
deg.   45 44.5 45.5
Difference between angles 2
Cal 1-7
deg.   90 89.5 90.5
Difference between angles 3
Cal 1-5
deg.   135 134.5 135.5
Difference between angles 4
Cal 1-4
deg.   180 179.5 180.5
Difference between angles 5
Cal 1-3
deg.   225 224.5 225.5
Difference between angles 6
Cal 1-6
deg.   270 269.5 270.5
Difference between angles 7
Cyl.1-2
deg.   315 314.5 315.5
Injection quantity adjustment
Adjusting point   A
Rack position   10.6
Pump speed r/min   650 650 650
Average injection quantity mm3/st.   138.9 137.9 139.9
Max. variation between cylinders %   0 -4 4
Basic   *
Fixing the lever   *
Injection quantity adjustment_02
Adjusting point   E
Rack position   6.2+-0.5
Pump speed r/min   235 235 235
Average injection quantity mm3/st.   9.5 7.5 11.5
Max. variation between cylinders %   0 -10 10
Fixing the rack   *
Injection quantity adjustment_03
Adjusting point   G
Rack position   -
Pump speed r/min   100 100 100
Average injection quantity mm3/st.   140 140
Fixing the lever   *
Remarks
After startup boost setting
 
Timer adjustment
Pump speed r/min   1000
Remarks
Measure the actual advance angle.
 
Timer adjustment_02
Pump speed r/min   1100
Advance angle deg.   6 5.5 6.5
Remarks
Finish
 

Test data Ex:

Governor adjustment

Test data 106871-5080
N:Pump speed R:Rack position (mm) (1)Tolerance for racks not indicated: +-0.05mm. (2)Excess fuel setting for starting: SXL (3)Damper spring setting (4)Variable speed specification: idling adjustment (5)Fix the lever at the full-load position at delivery. (6)Main spring setting
----------
SXL=11.1+-0.1mm
----------

Speed control lever angle

Test data 106871-5080
F:Full speed I:Idle (1)Pump speed = aa (2)Set the stopper bolt (fixed at full-load position at delivery.)
----------
aa=290r/min
----------
a=12deg+-5deg b=7.5deg+-5deg

0000000901

Test data 106871-5080
F:Full load I:Idle (1)Stopper bolt setting (2)Use the hole at R = aa
----------
aa=64.3mm
----------
a=18.5deg+-5deg b=28.5deg+-3deg

Stop lever angle

Test data 106871-5080
N:Pump normal S:Stop the pump. (1)Drive side (2)Use the pin at R = aa
----------
aa=28mm
----------
a=12deg+-5deg b=64deg+-5deg

Timing setting

Test data 106871-5080
(1)Pump vertical direction (2)Position of the coupling's key groove at the beginning of injection of the No. 8 cylinder. (3)- (4)-
----------

----------
a=(90deg)




Have questions with 106871-5080?





Group cross 106871-5080 ZEXEL

 
 
INJECTION-PUMP ASSEMBLY
 
 
INJECTION-PUMP ASSEMBLY
 
 
INJECTION-PUMP ASSEMBLY

Nissan-Diesel 

9 400 618 129 
1671397777 
INJECTION-PUMP ASSEMBLY
RE8
 
1671397778 
INJECTION-PUMP ASSEMBLY
 
 
INJECTION-PUMP ASSEMBLY

Nissan-Diesel 

9 400 618 130 
1671397778 
INJECTION-PUMP ASSEMBLY
RF8
 
 
INJECTION-PUMP ASSEMBLY

Nissan-Diesel 

9 400 618 131 
1671397779 
INJECTION-PUMP ASSEMBLY
RF8
 
 
INJECTION-PUMP ASSEMBLY

Nissan-Diesel 

9 400 618 132 
1671397800 
INJECTION-PUMP ASSEMBLY
RF8
 
 
INJECTION-PUMP ASSEMBLY

Nissan-Diesel 

9 400 618 133 
1671397801 
INJECTION-PUMP ASSEMBLY
RG8
 
 
INJECTION-PUMP ASSEMBLY

Nissan-Diesel 

9 400 618 134 
1671397803 
INJECTION-PUMP ASSEMBLY
RF8
 
 
INJECTION-PUMP ASSEMBLY

Nissan-Diesel 

9 400 618 135 
1671397804 
INJECTION-PUMP ASSEMBLY
RF8
 
 
INJECTION-PUMP ASSEMBLY

Nissan-Diesel 

9 400 618 136 
1671397802 
INJECTION-PUMP ASSEMBLY
RF8TA
106871-5080  
 
 
INJECTION-PUMP ASSEMBLY

Nissan-Diesel 

9 400 618 137 
1671397805 
INJECTION-PUMP ASSEMBLY
RG8
 
 
INJECTION-PUMP ASSEMBLY

Nissan-Diesel 

9 400 618 138 
1671397806 
INJECTION-PUMP ASSEMBLY
RF8
Back to top