106871-2740 ZEXEL 9 400 618 099 BOSCH INJECTION-PUMP ASSEMBLY 9400618099 1068712740 me066693


106871-2740 INJECTION-PUMP ASSEMBLY
Rating:
21
Buy INJECTION-PUMP ASSEMBLY 106871-2740 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH 9 400 618 099 9400618099
ZEXEL 106871-2740 1068712740
MITSUBISHI ME066693 me066693

Service parts 106871-2740 INJECTION-PUMP ASSEMBLY:

1. _
2. FUEL INJECTION PUMP 106087-5730
3. GOVERNOR 105306-0910
4. SUPPLY PUMP 105207-1140
5. AUTOM. ADVANCE MECHANIS 105636-1200
6. COUPLING PLATE 105663-0260
7. COUPLING PLATE
8. _
9. _
10. NOZZLE AND HOLDER ASSY 105100-7430
11. Nozzle and Holder ME6H6045A
12. Open Pre:MPa(Kqf/cm2) 17.7{180}/21.6{220}
13. NOZZLE-HOLDER 105031-4500
14. NOZZLE 105015-7310
15. NOZZLE SET

Include in #1:

106871-2740 as INJECTION-PUMP ASSEMBLY

Cross reference number

BOSCH 9 400 618 099 9400618099
ZEXEL 106871-2740 1068712740
MITSUBISHI ME066693 me066693


Zexel num
Bosch num
Firm num
Name
106871-2740 
9 400 618 099 
ME066693  MITSUBISHI
INJECTION-PUMP ASSEMBLY
8DC9 K 14CD INJECTION PUMP ASSY PE8P PE

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil
  ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8140
Bosch type code   EF8511/9A
Nozzle   105780-0000
Bosch type code   DN12SD12T
Nozzle holder   105780-2080
Bosch type code   EF8511/9
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm)
mm   8-3-600
Overflow valve opening pressure kPa   157 123 191
Overflow valve opening pressure kgf/cm2   1.6 1.25 1.95
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
Direction of rotation (viewed from drive side)
Right
  R
Injection timing adjustment
Direction of rotation (viewed from drive side)
Right
  R
Injection order   1-2-7-3- 4-5-6-8
Pre-stroke mm   4.8 4.75 4.85
Beginning of injection position
Governor side
  NO.1
Difference between angles 1
Cyl.1-2
deg.   45 44.5 45.5
Difference between angles 2
Cal 1-7
deg.   90 89.5 90.5
Difference between angles 3
Cal 1-3
deg.   135 134.5 135.5
Difference between angles 4
Cal 1-4
deg.   180 179.5 180.5
Difference between angles 5
Cal 1-5
deg.   225 224.5 225.5
Difference between angles 6
Cal 1-6
deg.   270 269.5 270.5
Difference between angles 7
Cal 1-8
deg.   315 314.5 315.5
Injection quantity adjustment
Adjusting point   -
Rack position   9.5
Pump speed r/min   700 700 700
Each cylinder's injection qty mm3/st.   118 114.5 121.5
Basic   *
Fixing the rack   *
Standard for adjustment of the maximum variation between cylinders   *
Injection quantity adjustment_02
Adjusting point   C
Rack position   6.1+-0.5
Pump speed r/min   225 225 225
Each cylinder's injection qty mm3/st.   20 17 23
Fixing the rack   *
Standard for adjustment of the maximum variation between cylinders   *
Injection quantity adjustment_03
Adjusting point   A
Rack position   R1(9.5)
Pump speed r/min   700 700 700
Average injection quantity mm3/st.   118 117 119
Basic   *
Fixing the lever   *
Injection quantity adjustment_04
Adjusting point   B
Rack position   R1(9.5)
Pump speed r/min   1100 1100 1100
Average injection quantity mm3/st.   124 118.8 129.2
Difference in delivery mm3/st.   10.4 10.4 10.4
Fixing the lever   *
Injection quantity adjustment_05
Adjusting point   E
Rack position   11.6+-0. 5
Pump speed r/min   100 100 100
Average injection quantity mm3/st.   125 105 145
Fixing the lever   *
Remarks
Rack limit using stop lever.
 
Timer adjustment
Pump speed r/min   950--
Advance angle deg.   0 0 0
Remarks
Start
 
Timer adjustment_02
Pump speed r/min   900
Advance angle deg.   0.5
Timer adjustment_03
Pump speed r/min   1000
Advance angle deg.   1.7 1.2 2.2
Timer adjustment_04
Pump speed r/min   1150
Advance angle deg.   6.5 6 7
Remarks
Finish
 

Test data Ex:

Governor adjustment

Test data 106871-2740
N:Pump speed R:Rack position (mm) (1)Rack limit using stop lever (2)Excess fuel setting for starting: SXL (3)Damper spring setting: DL
----------
SXL=R1+0.2mm DL=4.3-0.2mm
----------

0000000901

Test data 106871-2740
F:Full load I:Idle (1)Stopper bolt setting
----------

----------
a=16deg+-5deg b=18deg+-3deg

Stop lever angle

Test data 106871-2740
N:Pump normal S:Stop the pump. (1)Using reverse lever (top)
----------

----------
a=(18deg)+-6deg b=(36deg)+-6deg

0000001501 MICRO SWITCH

Adjustment of the micro-switch Adjust the bolt to obtain the following lever position when the micro-switch is ON. (1)Speed N1 (2)Rack position Ra
----------
N1=325+-5r/min Ra=5.6mm
----------

Timing setting

Test data 106871-2740
(1)Pump vertical direction (2)Coupling's key groove position at No 1 cylinder's beginning of injection (3)- (4)-
----------

----------
a=(40deg)




Have questions with 106871-2740?





Group cross 106871-2740 ZEXEL

Mitsubishi 

F 01G 09U 09P 
ME066703 
INJECTION-PUMP ASSEMBLY
8DC82
 
ME066704 
INJECTION-PUMP ASSEMBLY
8DC9
9 400 618 098 
ME066783 
INJECTION-PUMP ASSEMBLY
8DC9
 
ME066692 
INJECTION-PUMP ASSEMBLY
8DC8
106871-2740  
9 400 618 099 
ME066693 
INJECTION-PUMP ASSEMBLY
8DC9
9 400 618 100 
ME066787 
INJECTION-PUMP ASSEMBLY
8DC91
 
ME066834 
INJECTION-PUMP ASSEMBLY
8DC91
9 400 618 101 
ME066833 
INJECTION-PUMP ASSEMBLY
8DC82
 
ME066791 
INJECTION-PUMP ASSEMBLY
8DC8
 
ME066792 
INJECTION-PUMP ASSEMBLY
8DC9
Back to top