106871-2390 ZEXEL INJECTION-PUMP ASSEMBLY Calibration Data 1068712390 me066464


106871-2390 INJECTION-PUMP ASSEMBLY
Rating:
86
Buy INJECTION-PUMP ASSEMBLY 106871-2390 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

ZEXEL 106871-2390 1068712390
MITSUBISHI ME066464 me066464

Service parts 106871-2390 INJECTION-PUMP ASSEMBLY:

1. _
2. FUEL INJECTION PUMP 106087-5450
3. GOVERNOR 105487-1160
4. SUPPLY PUMP 105207-1140
5. AUTOM. ADVANCE MECHANIS 105636-0770
6. COUPLING PLATE 105663-0260
7. COUPLING PLATE
8. _
9. _
10. NOZZLE AND HOLDER ASSY 105100-5570
11. Nozzle and Holder
12. Open Pre:MPa(Kqf/cm2) 17.7(180)/21.6(220)
13. NOZZLE-HOLDER 105031-4500
14. NOZZLE 105015-5070
15. NOZZLE SET

Include in #1:

106871-2390 as INJECTION-PUMP ASSEMBLY

Cross reference number

ZEXEL 106871-2390 1068712390
MITSUBISHI ME066464 me066464


Zexel num
Bosch num
Firm num
Name
106871-2390 
 
ME066464  MITSUBISHI
INJECTION-PUMP ASSEMBLY
8DC8 * K

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil
  ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8140
Bosch type code   EF8511/9A
Nozzle   105780-0000
Bosch type code   DN12SD12T
Nozzle holder   105780-2080
Bosch type code   EF8511/9
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm)
mm   8-3-600
Overflow valve opening pressure kPa   157 123 191
Overflow valve opening pressure kgf/cm2   1.6 1.25 1.95
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
Direction of rotation (viewed from drive side)
Right
  R
Injection timing adjustment
Direction of rotation (viewed from drive side)
Right
  R
Injection order   1-2-7-3- 4-5-6-8
Pre-stroke mm   4.8 4.75 4.85
Beginning of injection position
Governor side
  NO.1
Difference between angles 1
Cyl.1-2
deg.   45 44.5 45.5
Difference between angles 2
Cal 1-7
deg.   90 89.5 90.5
Difference between angles 3
Cal 1-3
deg.   135 134.5 135.5
Difference between angles 4
Cal 1-4
deg.   180 179.5 180.5
Difference between angles 5
Cal 1-5
deg.   225 224.5 225.5
Difference between angles 6
Cal 1-6
deg.   270 269.5 270.5
Difference between angles 7
Cal 1-8
deg.   315 314.5 315.5
Injection quantity adjustment
Adjusting point   -
Rack position   9.3
Pump speed r/min   700 700 700
Each cylinder's injection qty mm3/st.   94 91.2 96.8
Basic   *
Fixing the rack   *
Standard for adjustment of the maximum variation between cylinders   *
Injection quantity adjustment_02
Adjusting point   C
Rack position   6.8+-0.5
Pump speed r/min   225 225 225
Each cylinder's injection qty mm3/st.   20 17 23
Fixing the rack   *
Standard for adjustment of the maximum variation between cylinders   *
Injection quantity adjustment_03
Adjusting point   A
Rack position   R1(9.3)
Pump speed r/min   700 700 700
Average injection quantity mm3/st.   94 93 95
Basic   *
Fixing the lever   *
Injection quantity adjustment_04
Adjusting point   B
Rack position   R1(9.3)
Pump speed r/min   1100 1100 1100
Average injection quantity mm3/st.   106 101.8 110.2
Difference in delivery mm3/st.   8.4 8.4 8.4
Fixing the lever   *
Injection quantity adjustment_05
Adjusting point   E
Rack position   -
Pump speed r/min   100 100 100
Average injection quantity mm3/st.   130 110 150
Fixing the lever   *
Remarks
After startup boost setting
 
Timer adjustment
Pump speed r/min   950--
Advance angle deg.   0 0 0
Remarks
Start
 
Timer adjustment_02
Pump speed r/min   900
Advance angle deg.   0.5
Timer adjustment_03
Pump speed r/min   1000
Advance angle deg.   1.8 1.1 2.5
Timer adjustment_04
Pump speed r/min   1100
Advance angle deg.   3.5 3.5
Timer adjustment_05
Pump speed r/min   1150
Advance angle deg.   6.5 6 7
Remarks
Finish
 

Test data Ex:

Governor adjustment

Test data 106871-2390
N:Pump speed R:Rack position (mm) (1)Beginning of damper spring operation: DL (2)Excess fuel setting for starting: SXL
----------
DL=5-0.2mm SXL=10.2+-0.1mm
----------

Speed control lever angle

Test data 106871-2390
F:Full speed
----------

----------
a=21deg+-5deg

0000000901

Test data 106871-2390
F:Full load I:Idle (1)Stopper bolt setting
----------

----------
a=10deg+-5deg b=24deg+-3deg

Stop lever angle

Test data 106871-2390
N:Pump normal S:Stop the pump. (1)Rack position = aa (2)Stopper bolt setting (3)Rack position bb (4)Free (at shipping)
----------
aa=4.7-0.5mm bb=12.4mm
----------
a=43deg+7deg-5deg b=21.5deg+-5deg c=(10.5deg)

0000001501 MICRO SWITCH

Adjustment of the micro-switch Adjust the bolt to obtain the following lever position when the micro-switch is ON. (1)Speed N1 (2)Rack position Ra
----------
N1=325+-5r/min Ra=6.3mm
----------




Have questions with 106871-2390?





Group cross 106871-2390 ZEXEL

Mitsubishi 

 
ME066385 
INJECTION-PUMP ASSEMBLY
8DC8
 
ME066427 
INJECTION-PUMP ASSEMBLY
8DC9
 
ME066428 
INJECTION-PUMP ASSEMBLY
8DC81
 
ME066415 
INJECTION-PUMP ASSEMBLY
8DC9
 
ME066441 
INJECTION-PUMP ASSEMBLY
8DC9
 
ME066442 
INJECTION-PUMP ASSEMBLY
8DC81
9 400 618 087 
ME066177 
INJECTION-PUMP ASSEMBLY
8DC9
 
ME066178 
INJECTION-PUMP ASSEMBLY
8DC9
 
ME066463 
INJECTION-PUMP ASSEMBLY
8DC9
106871-2390  
 
ME066464 
INJECTION-PUMP ASSEMBLY
8DC8
Back to top