106871-2290 ZEXEL INJECTION-PUMP ASSEMBLY Calibration Data 1068712290 me066326


106871-2290 INJECTION-PUMP ASSEMBLY
Rating:
76
Buy INJECTION-PUMP ASSEMBLY 106871-2290 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

ZEXEL 106871-2290 1068712290
MITSUBISHI ME066326 me066326

Service parts 106871-2290 INJECTION-PUMP ASSEMBLY:

1. _
2. FUEL INJECTION PUMP 106087-5351
3. GOVERNOR 105306-0750
4. SUPPLY PUMP 105207-1140
5. AUTOM. ADVANCE MECHANIS 105636-0770
6. COUPLING PLATE 105663-0260
7. COUPLING PLATE
8. _
9. _
10. NOZZLE AND HOLDER ASSY 105100-5530
11. Nozzle and Holder
12. Open Pre:MPa(Kqf/cm2) 17.7(180)/21.6(220)
13. NOZZLE-HOLDER 105031-4500
14. NOZZLE 105015-5070
15. NOZZLE SET

Include in #1:

106871-2290 as INJECTION-PUMP ASSEMBLY

Cross reference number

ZEXEL 106871-2290 1068712290
MITSUBISHI ME066326 me066326


Zexel num
Bosch num
Firm num
Name
106871-2290 
 
ME066326  MITSUBISHI
INJECTION-PUMP ASSEMBLY
8DC9 * K

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil
  ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8140
Bosch type code   EF8511/9A
Nozzle   105780-0000
Bosch type code   DN12SD12T
Nozzle holder   105780-2080
Bosch type code   EF8511/9
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm)
mm   8-3-600
Overflow valve opening pressure kPa   157 123 191
Overflow valve opening pressure kgf/cm2   1.6 1.25 1.95
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
Direction of rotation (viewed from drive side)
Right
  R
Injection timing adjustment
Direction of rotation (viewed from drive side)
Right
  R
Injection order   1-2-7-3- 4-5-6-8
Pre-stroke mm   4.8 4.75 4.85
Beginning of injection position
Governor side
  NO.1
Difference between angles 1
Cyl.1-2
deg.   45 44.5 45.5
Difference between angles 2
Cal 1-7
deg.   90 89.5 90.5
Difference between angles 3
Cal 1-3
deg.   135 134.5 135.5
Difference between angles 4
Cal 1-4
deg.   180 179.5 180.5
Difference between angles 5
Cal 1-5
deg.   225 224.5 225.5
Difference between angles 6
Cal 1-6
deg.   270 269.5 270.5
Difference between angles 7
Cal 1-8
deg.   315 314.5 315.5
Injection quantity adjustment
Adjusting point   -
Rack position   10.7
Pump speed r/min   700 700 700
Each cylinder's injection qty mm3/st.   130 126.1 133.9
Basic   *
Fixing the rack   *
Standard for adjustment of the maximum variation between cylinders   *
Injection quantity adjustment_02
Adjusting point   C
Rack position   6.7+-0.5
Pump speed r/min   200 200 200
Each cylinder's injection qty mm3/st.   18.5 15.7 21.3
Fixing the rack   *
Standard for adjustment of the maximum variation between cylinders   *
Injection quantity adjustment_03
Adjusting point   A
Rack position   R3(10.7)
Pump speed r/min   700 700 700
Average injection quantity mm3/st.   130 129 131
Fixing the lever   *
Injection quantity adjustment_04
Adjusting point   B
Rack position   R2(10.4)
Pump speed r/min   1100 1100 1100
Average injection quantity mm3/st.   130 124.8 135.2
Difference in delivery mm3/st.   10.4 10.4 10.4
Fixing the lever   *
Timer adjustment
Pump speed r/min   950--
Advance angle deg.   0 0 0
Remarks
Start
 
Timer adjustment_02
Pump speed r/min   900
Advance angle deg.   0.5
Timer adjustment_03
Pump speed r/min   1000
Advance angle deg.   1.8 1.1 2.5
Timer adjustment_04
Pump speed r/min   1100
Advance angle deg.   3.5 3.5
Timer adjustment_05
Pump speed r/min   1150
Advance angle deg.   6.5 6 7
Remarks
Finish
 

Test data Ex:

Governor adjustment

Test data 106871-2290
N:Pump speed R:Rack position (mm) (1)Rack limit using stop lever: RA (2)Excess fuel setting for starting: SXL (3)Rack difference between N = N1 and N = N2 (4)Beginning of damper spring operation: DL
----------
RA=13+0.2mm SXL=R1+0.2mm N1=1100r/min N2=600r/min DL=5-0.5mm
----------

0000000901

Test data 106871-2290
F:Full load I:Idle (1)Stopper bolt setting
----------

----------
a=15deg+-5deg b=19deg+-3deg

Stop lever angle

Test data 106871-2290
N:Pump normal S:Stop the pump. (1)Using reverse lever (top)
----------

----------
a=20deg+-6deg b=39deg+-6deg

0000001501 MICRO SWITCH

Adjustment of the micro-switch Adjust the bolt to obtain the following lever position when the micro-switch is ON. (1)Speed N1 (2)Rack position Ra
----------
N1=325+-5r/min Ra=6.3mm
----------




Have questions with 106871-2290?





Group cross 106871-2290 ZEXEL

Mitsubishi 

 
ME066278 
INJECTION-PUMP ASSEMBLY
8DC81
9 400 618 084 
ME066431 
INJECTION-PUMP ASSEMBLY
8DC81
 
ME066280 
INJECTION-PUMP ASSEMBLY
8DC81
 
ME066449 
INJECTION-PUMP ASSEMBLY
8DC81
 
ME066281 
INJECTION-PUMP ASSEMBLY
8DC9
 
ME066452 
INJECTION-PUMP ASSEMBLY
8DC9

Mitsubishi-Heav 

 
3276500160 
INJECTION-PUMP ASSEMBLY
S8A
 
3276510160 
INJECTION-PUMP ASSEMBLY
S8A
F 019 Z10 037 
3276510161 
INJECTION-PUMP ASSEMBLY
S8A
 
 
INJECTION-PUMP ASSEMBLY
S8A
9 400 618 085 
 
INJECTION-PUMP ASSEMBLY
S8A

Mitsubishi 

 
ME066167 
INJECTION-PUMP ASSEMBLY
8DC81
 
ME066308 
INJECTION-PUMP ASSEMBLY
8DC81
F 019 Z10 027 
ME066309 
INJECTION-PUMP ASSEMBLY
8DC9
9 400 618 086 
ME069716 
INJECTION-PUMP ASSEMBLY
8DC90
106871-2290  
 
ME066326 
INJECTION-PUMP ASSEMBLY
8DC9
Back to top