106871-0542 ZEXEL 9 400 618 031 BOSCH INJECTION-PUMP ASSEMBLY 9400618031 1068710542 1671397671


106871-0542 INJECTION-PUMP ASSEMBLY
Rating:
24
Buy INJECTION-PUMP ASSEMBLY 106871-0542 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH 9 400 618 031 9400618031
ZEXEL 106871-0542 1068710542
NISSAN-DIESEL 1671397671 1671397671

Service parts 106871-0542 INJECTION-PUMP ASSEMBLY:

1. _
2. FUEL INJECTION PUMP 106087-7530
3. GOVERNOR 105487-0984
4. SUPPLY PUMP 105237-4180
5. AUTOM. ADVANCE MECHANIS 105636-2790
6. COUPLING PLATE 105662-1150
7. COUPLING PLATE
8. _
9. _
10. NOZZLE AND HOLDER ASSY 105100-6800
11. Nozzle and Holder 1660097060
12. Open Pre:MPa(Kqf/cm2) 19.6(200)
13. NOZZLE-HOLDER 105031-4210
14. NOZZLE 105015-6450
15. NOZZLE SET

Include in #1:

106871-0542 as INJECTION-PUMP ASSEMBLY

Cross reference number

BOSCH 9 400 618 031 9400618031
ZEXEL 106871-0542 1068710542
NISSAN-DIESEL 1671397671 1671397671


Zexel num
Bosch num
Firm num
Name
106871-0542 
9 400 618 031 
1671397671  NISSAN-DIESEL
INJECTION-PUMP ASSEMBLY
RE8 K 14CD INJECTION PUMP ASSY PE8P PE

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil
  ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8140
Bosch type code   EF8511/9A
Nozzle   105780-0000
Bosch type code   DN12SD12T
Nozzle holder   105780-2080
Bosch type code   EF8511/9
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm)
mm   8-3-600
Overflow valve opening pressure kPa   157 123 191
Overflow valve opening pressure kgf/cm2   1.6 1.25 1.95
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
Direction of rotation (viewed from drive side)
Right
  R
Injection timing adjustment
Direction of rotation (viewed from drive side)
Right
  R
Injection order   1-8-7-5- 4-3-6-2
Pre-stroke mm   3.65 3.6 3.7
Beginning of injection position
Governor side
  NO.1
Difference between angles 1
Cal 1-8
deg.   45 44.5 45.5
Difference between angles 2
Cal 1-7
deg.   90 89.5 90.5
Difference between angles 3
Cal 1-5
deg.   135 134.5 135.5
Difference between angles 4
Cal 1-4
deg.   180 179.5 180.5
Difference between angles 5
Cal 1-3
deg.   225 224.5 225.5
Difference between angles 6
Cal 1-6
deg.   270 269.5 270.5
Difference between angles 7
Cyl.1-2
deg.   315 314.5 315.5
Injection quantity adjustment
Adjusting point   A
Rack position   10.2
Pump speed r/min   700 700 700
Average injection quantity mm3/st.   105.2 104.2 106.2
Max. variation between cylinders %   0 -4 4
Basic   *
Fixing the lever   *
Injection quantity adjustment_02
Adjusting point   B
Rack position   5.7+-0.5
Pump speed r/min   250 250 250
Average injection quantity mm3/st.   11.9 9.9 13.9
Max. variation between cylinders %   0 -10 10
Fixing the rack   *
Timer adjustment
Pump speed r/min   750
Advance angle deg.   0.5
Timer adjustment_02
Pump speed r/min   900
Advance angle deg.   1.4 0.9 1.9
Timer adjustment_03
Pump speed r/min   1150
Advance angle deg.   5.5 5 6
Remarks
Finish
 

Test data Ex:

Governor adjustment

Test data 106871-0542
N:Pump speed R:Rack position (mm) (1)Lever ratio: RT (2)Target shim dimension: TH (3)Tolerance for racks not indicated: +-0.05mm. (4)Rack limit using stop lever: R1 (at N = N1 or less). (5)Damper spring setting (6)Variable speed specification: idling adjustment (7)Main spring setting (8)Set idle sub-spring
----------
RT=1 TH=2.7mm R1=10.6+0.2mm N1=100r/min
----------

Speed control lever angle

Test data 106871-0542
F:Full speed I:Idle (1)Stopper bolt setting
----------

----------
a=11deg+-5deg b=21deg+-5deg

0000000901

Test data 106871-0542
F:Full load I:Idle (1)Stopper bolt setting
----------

----------
a=24.5deg+-5deg b=35.5deg+-3deg

Stop lever angle

Test data 106871-0542
N:Pump normal S:Stop the pump. (1)Drive side (2)Rack position = aa (3)R = bb
----------
aa=10.6+0.2mm bb=32mm
----------
a=27.5deg+-5deg b=2deg+-5deg

Timing setting

Test data 106871-0542
(1)Pump vertical direction (2)Position of the coupling's key groove at the beginning of injection of the No. 8 cylinder. (3)- (4)-
----------

----------
a=(90deg)




Have questions with 106871-0542?





Group cross 106871-0542 ZEXEL

Nissan-Diesel 

 
1680097506 
INJECTION-PUMP ASSEMBLY
RE8
 
 
INJECTION-PUMP ASSEMBLY
RE8
 
 
INJECTION-PUMP ASSEMBLY
 
 
INJECTION-PUMP ASSEMBLY

Nissan-Diesel 

9 400 618 029 
1680097508 
INJECTION-PUMP ASSEMBLY
RE8
 
 
INJECTION-PUMP ASSEMBLY
 
 
INJECTION-PUMP ASSEMBLY

Nissan-Diesel 

9 400 618 030 
1671397669 
INJECTION-PUMP ASSEMBLY
RE8
9 400 610 384 
 
INJECTION-PUMP ASSEMBLY
 
 
INJECTION-PUMP ASSEMBLY

Nissan-Diesel 

9 400 613 182 
1671397670 
INJECTION-PUMP ASSEMBLY
RE8
 
 
INJECTION-PUMP ASSEMBLY
9 400 611 398 
 
INJECTION-PUMP ASSEMBLY

Nissan-Diesel 

106871-0542  
9 400 618 031 
1671397671 
INJECTION-PUMP ASSEMBLY
RE8
 
 
INJECTION-PUMP ASSEMBLY

Nissan-Diesel 

9 400 612 675 
1671297506 
INJECTION-PUMP ASSEMBLY
RD8T
 
 
INJECTION-PUMP ASSEMBLY
RE8
 
 
INJECTION-PUMP ASSEMBLY
 
 
INJECTION-PUMP ASSEMBLY

Nissan-Diesel 

9 400 618 032 
1671397674 
INJECTION-PUMP ASSEMBLY
RE8
 
 
INJECTION-PUMP ASSEMBLY

Nissan-Diesel 

 
1679097516 
INJECTION-PUMP ASSEMBLY
RD8T04
 
 
INJECTION-PUMP ASSEMBLY
RF8
 
 
INJECTION-PUMP ASSEMBLY
 
 
INJECTION-PUMP ASSEMBLY

Nissan-Diesel 

9 400 618 033 
1671397675 
INJECTION-PUMP ASSEMBLY
RF8
 
 
INJECTION-PUMP ASSEMBLY
RF8
 
 
INJECTION-PUMP ASSEMBLY
 
 
INJECTION-PUMP ASSEMBLY

Nissan-Diesel 

9 400 618 034 
1671397522 
INJECTION-PUMP ASSEMBLY
RF8
Back to top