Fuel injectors
  1. Home
  2. injection
  3. #1068710060

106871-0060 ZEXEL 9 400 618 007 BOSCH INJECTION-PUMP ASSEMBLY 9400618007 1068710060 1679097502


106871-0060 INJECTION-PUMP ASSEMBLY
Rating:
68
Buy INJECTION-PUMP ASSEMBLY 106871-0060 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH 9 400 618 007 9400618007
ZEXEL 106871-0060 1068710060
NISSAN-DIESEL 1679097502 1679097502

Service parts 106871-0060 INJECTION-PUMP ASSEMBLY:

1. _
2. FUEL INJECTION PUMP 106087-5121
3. GOVERNOR 105407-0700
4. SUPPLY PUMP 105237-6350
5. AUTOM. ADVANCE MECHANIS 105645-5080
6. COUPLING PLATE
7. COUPLING PLATE
8. _
9. _
10. NOZZLE AND HOLDER ASSY 105101-4760
11. Nozzle and Holder 1660097005
12. Open Pre:MPa(Kqf/cm2) 22.6{230}
13. NOZZLE-HOLDER 105031-4210
14. NOZZLE 105015-3440
15. NOZZLE SET

Include in #1:

106871-0060 as INJECTION-PUMP ASSEMBLY

Cross reference number

BOSCH 9 400 618 007 9400618007
ZEXEL 106871-0060 1068710060
NISSAN-DIESEL 1679097502 1679097502


Zexel num
Bosch num
Firm num
Name
106871-0060 
9 400 618 007 
1679097502  NISSAN-DIESEL
INJECTION-PUMP ASSEMBLY
RD8T * K 14CD PE8P PE

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil   ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8140
Bosch type code   EF8511/9A
Nozzle   105780-0000
Bosch type code   DN12SD12T
Nozzle holder   105780-2080
Bosch type code   EF8511/9
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm) mm   8-3-600
Overflow valve   132424-0620
Overflow valve opening pressure kPa   157 123 191
Overflow valve opening pressure kgf/cm2   1.6 1.25 1.95
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
Direction of rotation (viewed from drive side)
Right   R
Injection timing adjustment
Direction of rotation (viewed from drive side)
Right   R
Injection order   1-8-7-5- 4-3-6-2
Pre-stroke mm   3 2.95 3.05
Beginning of injection position
Governor side   NO.1
Difference between angles 1
Cal 1-8 deg.   45 44.5 45.5
Difference between angles 2
Cal 1-7 deg.   90 89.5 90.5
Difference between angles 3
Cal 1-5 deg.   135 134.5 135.5
Difference between angles 4
Cal 1-4 deg.   180 179.5 180.5
Difference between angles 5
Cal 1-3 deg.   225 224.5 225.5
Difference between angles 6
Cal 1-6 deg.   270 269.5 270.5
Difference between angles 7
Cyl.1-2 deg.   315 314.5 315.5
Injection quantity adjustment
Adjusting point   A
Rack position   13.6+-0. 5
Pump speed r/min   500 500 500
Average injection quantity mm3/st.   204 198 210
Max. variation between cylinders %   0 -4 4
Fixing the lever   *
Injection quantity adjustment_02
Adjusting point   B
Rack position   13.6+-0. 5
Pump speed r/min   750 750 750
Average injection quantity mm3/st.   187.5 181.5 193.5
Max. variation between cylinders %   0 -4 4
Fixing the lever   *
Injection quantity adjustment_03
Adjusting point   C
Rack position   13.6
Pump speed r/min   1150 1150 1150
Average injection quantity mm3/st.   171 169 173
Max. variation between cylinders %   0 -4 4
Basic   *
Fixing the lever   *
Injection quantity adjustment_04
Adjusting point   D
Rack position   6.5+-0.5
Pump speed r/min   300 300 300
Average injection quantity mm3/st.   17.5 15.5 19.5
Max. variation between cylinders %   0 -10 10
Fixing the rack   *
Timer adjustment
Pump speed r/min   500
Advance angle deg.   0.5
Timer adjustment_02
Pump speed r/min   600
Advance angle deg.   1
Timer adjustment_03
Pump speed r/min   750
Advance angle deg.   1.2 0.7 1.7
Timer adjustment_04
Pump speed r/min   1150
Advance angle deg.   3.5 3.5 4.5
Timer adjustment_05
Pump speed r/min   1250
Advance angle deg.   4 4 5
Remarks
Finish  

Test data Ex:

Governor adjustment

Test data 106871-0060
N:Pump speed R:Rack position (mm) (1)Target notch: K (2)Tolerance for racks not indicated: +-0.05mm. (3)RACK LIMIT: RAL (4)Damper spring setting
----------
K=10 RAL=14.3+-0.1mm
----------

Speed control lever angle

Test data 106871-0060
F:Full speed I:Idle S:Stop
----------

----------
a=12deg+-5deg b=32deg+-3deg c=27.5deg+-5deg

Stop lever angle

Test data 106871-0060
N:Pump normal S:Stop the pump.
----------

----------
a=27.5deg+-5deg b=53deg+-5deg




Have questions with 106871-0060?





Group cross 106871-0060 ZEXEL

106871-0000  
 
 
INJECTION-PUMP ASSEMBLY
106871-0001  
 
 
INJECTION-PUMP ASSEMBLY

Nissan-Diesel 

106871-0002  
 
1671397509 
INJECTION-PUMP ASSEMBLY
RD8T
106871-0010  
 
1670097516 
INJECTION-PUMP ASSEMBLY
RD8T
106871-0020  
 
 
INJECTION-PUMP ASSEMBLY
106871-0021  
 
 
INJECTION-PUMP ASSEMBLY

Nissan-Diesel 

106871-0022  
 
1670097517 
INJECTION-PUMP ASSEMBLY
RD8T
106871-0030  

106871-0051 
 
1671797500 
INJECTION-PUMP ASSEMBLY
RD8T
106871-0040  
 
1671397514 
INJECTION-PUMP ASSEMBLY
RD8T
106871-0050  
 
 
INJECTION-PUMP ASSEMBLY

Nissan-Diesel 

106871-0051  
 
1671797502 
INJECTION-PUMP ASSEMBLY
RD8T
106871-0060  
9 400 618 007 
1679097502 
INJECTION-PUMP ASSEMBLY
RD8T
106871-0070  
 
1679097503 
INJECTION-PUMP ASSEMBLY
RD8T
106871-0080  

106871-0551 
 
1679097507 
INJECTION-PUMP ASSEMBLY
RD8T
106871-0081  

106871-0551 
 
1671297500 
INJECTION-PUMP ASSEMBLY
RD8T
106871-0082  

106871-0551 
 
 
INJECTION-PUMP ASSEMBLY
RD8T
106871-0083  

106871-0550 
 
1671297503 
INJECTION-PUMP ASSEMBLY
RD8T
106871-0090  

106871-0093 
 
1671597502 
INJECTION-PUMP ASSEMBLY
RD8T
106871-0091  
 
 
INJECTION-PUMP ASSEMBLY
106871-0092  
 
 
INJECTION-PUMP ASSEMBLY

Nissan-Diesel 

106871-0093  
 
1671597504 
INJECTION-PUMP ASSEMBLY
RD8T03
Back to top