106861-0823 ZEXEL 9 400 617 953 BOSCH INJECTION-PUMP ASSEMBLY 9400617953 1068610823 1670097569


106861-0823 INJECTION-PUMP ASSEMBLY
Rating:
16
Buy INJECTION-PUMP ASSEMBLY 106861-0823 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH 9 400 617 953 9400617953
ZEXEL 106861-0823 1068610823
NISSAN-DIESEL 1670097569 1670097569

Service parts 106861-0823 INJECTION-PUMP ASSEMBLY:

1. _
2. FUEL INJECTION PUMP 106086-5610
3. GOVERNOR 105306-0861
4. SUPPLY PUMP 105217-6040
5. AUTOM. ADVANCE MECHANIS 105636-2760
6. COUPLING PLATE 105662-1150
7. COUPLING PLATE
8. _
9. _
10. NOZZLE AND HOLDER ASSY 105100-4550
11. Nozzle and Holder 1660097012
12. Open Pre:MPa(Kqf/cm2) 19.6(200)
13. NOZZLE-HOLDER 105031-4210
14. NOZZLE 105015-4250
15. NOZZLE SET

Include in #1:

106861-0823 as INJECTION-PUMP ASSEMBLY

Cross reference number

BOSCH 9 400 617 953 9400617953
ZEXEL 106861-0823 1068610823
NISSAN-DIESEL 1670097569 1670097569


Zexel num
Bosch num
Firm num
Name
106861-0823 
9 400 617 953 
1670097569  NISSAN-DIESEL
INJECTION-PUMP ASSEMBLY
RD8 * K

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil
  ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8140
Bosch type code   EF8511/9A
Nozzle   105780-0000
Bosch type code   DN12SD12T
Nozzle holder   105780-2080
Bosch type code   EF8511/9
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm)
mm   8-3-600
Overflow valve   132424-0620
Overflow valve opening pressure kPa   157 123 191
Overflow valve opening pressure kgf/cm2   1.6 1.25 1.95
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
Direction of rotation (viewed from drive side)
Right
  R
Injection timing adjustment
Direction of rotation (viewed from drive side)
Right
  R
Injection order   1-8-7-5- 4-3-6-2
Pre-stroke mm   3.65 3.6 3.7
Beginning of injection position
Governor side
  NO.1
Difference between angles 1
Cal 1-8
deg.   45 44.5 45.5
Difference between angles 2
Cal 1-7
deg.   90 89.5 90.5
Difference between angles 3
Cal 1-5
deg.   135 134.5 135.5
Difference between angles 4
Cal 1-4
deg.   180 179.5 180.5
Difference between angles 5
Cal 1-3
deg.   225 224.5 225.5
Difference between angles 6
Cal 1-6
deg.   270 269.5 270.5
Difference between angles 7
Cyl.1-2
deg.   315 314.5 315.5
Injection quantity adjustment
Adjusting point   A
Rack position   11.5
Pump speed r/min   700 700 700
Average injection quantity mm3/st.   109 108 110
Max. variation between cylinders %   0 -4 4
Basic   *
Fixing the lever   *
Injection quantity adjustment_02
Adjusting point   C
Rack position   5.7+-0.5
Pump speed r/min   250 250 250
Average injection quantity mm3/st.   18.6 16.6 20.6
Max. variation between cylinders %   0 -10 10
Fixing the rack   *
Remarks
Adjust only variation between cylinders; adjust governor according to governor specifications.
 
Timer adjustment
Pump speed r/min   600
Advance angle deg.   0.5
Timer adjustment_02
Pump speed r/min   750
Advance angle deg.   1
Timer adjustment_03
Pump speed r/min   1000
Advance angle deg.   1.9 1.4 2.4
Timer adjustment_04
Pump speed r/min   1250+-25
Advance angle deg.   4 3.5 4.5
Remarks
Finish
 

Test data Ex:

Governor adjustment

Test data 106861-0823
N:Pump speed R:Rack position (mm) (1)Beginning of damper spring operation: DL (2)Rack limit using stop lever
----------
DL=5.1-0.5mm
----------

0000000901

Test data 106861-0823
F:Full load I:Idle (1)Stopper bolt setting
----------

----------
a=16deg+-5deg b=24deg+-3deg

Stop lever angle

Test data 106861-0823
N:Pump normal S:Stop the pump.
----------

----------
a=15deg+-5deg b=34deg+-3deg

Timing setting

Test data 106861-0823
(1)Pump vertical direction (2)Position of the coupling's key groove at the beginning of injection of the No. 8 cylinder. (3)- (4)-
----------

----------
a=(90deg)




Have questions with 106861-0823?





Group cross 106861-0823 ZEXEL

 
 
INJECTION-PUMP ASSEMBLY

Nissan-Diesel 

 
1671397570 
INJECTION-PUMP ASSEMBLY
RD8
 
 
INJECTION-PUMP ASSEMBLY
RD8
 
 
INJECTION-PUMP ASSEMBLY
 
 
INJECTION-PUMP ASSEMBLY

Nissan-Diesel 

9 400 617 952 
1671397572 
INJECTION-PUMP ASSEMBLY
RD8
F 019 Z10 875 
 
INJECTION-PUMP ASSEMBLY
 
 
INJECTION-PUMP ASSEMBLY

Nissan-Diesel 

106861-0823  
9 400 617 953 
1670097569 
INJECTION-PUMP ASSEMBLY
RD8
 
 
INJECTION-PUMP ASSEMBLY

Nissan-Diesel 

 
1670097572 
INJECTION-PUMP ASSEMBLY
RD8
F 019 Z10 207 
 
INJECTION-PUMP ASSEMBLY

Nissan-Diesel 

9 400 617 954 
1670097573 
INJECTION-PUMP ASSEMBLY
RD8
 
 
INJECTION-PUMP ASSEMBLY

Nissan-Diesel 

9 400 617 955 
1670097613 
INJECTION-PUMP ASSEMBLY
RD8
 
1671297504 
INJECTION-PUMP ASSEMBLY
RD8
 
1671397672 
INJECTION-PUMP ASSEMBLY
RD8
 
 
INJECTION-PUMP ASSEMBLY

Nissan-Diesel 

 
1671297505 
INJECTION-PUMP ASSEMBLY
RD8
Back to top