106861-0813 ZEXEL 9 400 617 952 BOSCH INJECTION-PUMP ASSEMBLY 9400617952 1068610813 1671397572


106861-0813 INJECTION-PUMP ASSEMBLY
Rating:
13
Buy INJECTION-PUMP ASSEMBLY 106861-0813 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH 9 400 617 952 9400617952
ZEXEL 106861-0813 1068610813
NISSAN-DIESEL 1671397572 1671397572

Service parts 106861-0813 INJECTION-PUMP ASSEMBLY:

1. _
2. FUEL INJECTION PUMP 106086-5411
3. GOVERNOR 105487-0851
4. SUPPLY PUMP 105217-6040
5. AUTOM. ADVANCE MECHANIS 105636-2760
6. COUPLING PLATE 105662-1150
7. COUPLING PLATE
8. _
9. _
10. NOZZLE AND HOLDER ASSY 105100-4880
11. Nozzle and Holder 1660097015
12. Open Pre:MPa(Kqf/cm2) 19.6(200)
13. NOZZLE-HOLDER 105031-4210
14. NOZZLE 105015-4530
15. NOZZLE SET

Include in #1:

106861-0813 as INJECTION-PUMP ASSEMBLY

Cross reference number

BOSCH 9 400 617 952 9400617952
ZEXEL 106861-0813 1068610813
NISSAN-DIESEL 1671397572 1671397572


Zexel num
Bosch num
Firm num
Name
106861-0813 
9 400 617 952 
1671397572  NISSAN-DIESEL
INJECTION-PUMP ASSEMBLY
RD8 * K

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil
  ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8140
Bosch type code   EF8511/9A
Nozzle   105780-0000
Bosch type code   DN12SD12T
Nozzle holder   105780-2080
Bosch type code   EF8511/9
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm)
mm   8-3-600
Overflow valve   132424-0620
Overflow valve opening pressure kPa   157 123 191
Overflow valve opening pressure kgf/cm2   1.6 1.25 1.95
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
Direction of rotation (viewed from drive side)
Right
  R
Injection timing adjustment
Direction of rotation (viewed from drive side)
Right
  R
Injection order   1-8-7-5- 4-3-6-2
Pre-stroke mm   3.65 3.6 3.7
Beginning of injection position
Governor side
  NO.1
Difference between angles 1
Cal 1-8
deg.   45 44.5 45.5
Difference between angles 2
Cal 1-7
deg.   90 89.5 90.5
Difference between angles 3
Cal 1-5
deg.   135 134.5 135.5
Difference between angles 4
Cal 1-4
deg.   180 179.5 180.5
Difference between angles 5
Cal 1-3
deg.   225 224.5 225.5
Difference between angles 6
Cal 1-6
deg.   270 269.5 270.5
Difference between angles 7
Cyl.1-2
deg.   315 314.5 315.5
Injection quantity adjustment
Adjusting point   A
Rack position   11.6
Pump speed r/min   700 700 700
Average injection quantity mm3/st.   105.1 104.1 106.1
Max. variation between cylinders %   0 -4 4
Basic   *
Fixing the lever   *
Injection quantity adjustment_02
Adjusting point   B
Rack position   6.9+-0.5
Pump speed r/min   250 250 250
Average injection quantity mm3/st.   13.1 11.1 15.1
Max. variation between cylinders %   0 -10 10
Fixing the rack   *
Timer adjustment
Pump speed r/min   650--
Advance angle deg.   0 0 0
Remarks
Start
 
Timer adjustment_02
Pump speed r/min   600
Advance angle deg.   0.5
Timer adjustment_03
Pump speed r/min   1150
Advance angle deg.   3 2.5 3.5
Timer adjustment_04
Pump speed r/min   -
Advance angle deg.   4 4 4
Remarks
Measure the actual speed, stop
 

Test data Ex:

Governor adjustment

Test data 106861-0813
N:Pump speed R:Rack position (mm) (1)Adjust with speed control lever at full position (minimum-maximum speed specification) (2)Adjust with the load control lever in the full position (variable speed specification). (3)Rack limit using the stop lever: R1 (4)Damper spring setting: DL (5)Main spring setting (6)Set idle sub-spring
----------
R1=11.6mm DL=5.6-0.2mm
----------

Speed control lever angle

Test data 106861-0813
F:Full speed I:Idle
----------

----------
a=10deg+-5deg b=10deg+-5deg

0000000901

Test data 106861-0813
F:Full load I:Idle (1)Stopper bolt setting
----------

----------
a=24.5deg+-5deg b=38.5deg+-3deg

Stop lever angle

Test data 106861-0813
N:Pump normal S:Stop the pump. (1)Rack position = aa (2)Use the hole at R = bb
----------
aa=11.6mm bb=32mm
----------
a=29.5deg+-5deg b=4deg+-5deg

Timing setting

Test data 106861-0813
(1)Pump vertical direction (2)Position of the coupling's key groove at the beginning of injection of the No. 8 cylinder. (3)- (4)-
----------

----------
a=(90deg)




Have questions with 106861-0813?





Group cross 106861-0813 ZEXEL

 
 
INJECTION-PUMP ASSEMBLY

Nissan-Diesel 

 
1671397570 
INJECTION-PUMP ASSEMBLY
RD8
 
 
INJECTION-PUMP ASSEMBLY
RD8
 
 
INJECTION-PUMP ASSEMBLY
 
 
INJECTION-PUMP ASSEMBLY

Nissan-Diesel 

106861-0813  
9 400 617 952 
1671397572 
INJECTION-PUMP ASSEMBLY
RD8
F 019 Z10 875 
 
INJECTION-PUMP ASSEMBLY
 
 
INJECTION-PUMP ASSEMBLY

Nissan-Diesel 

9 400 617 953 
1670097569 
INJECTION-PUMP ASSEMBLY
RD8
 
 
INJECTION-PUMP ASSEMBLY

Nissan-Diesel 

 
1670097572 
INJECTION-PUMP ASSEMBLY
RD8
F 019 Z10 207 
 
INJECTION-PUMP ASSEMBLY

Nissan-Diesel 

9 400 617 954 
1670097573 
INJECTION-PUMP ASSEMBLY
RD8
 
 
INJECTION-PUMP ASSEMBLY

Nissan-Diesel 

9 400 617 955 
1670097613 
INJECTION-PUMP ASSEMBLY
RD8
 
1671297504 
INJECTION-PUMP ASSEMBLY
RD8
 
1671397672 
INJECTION-PUMP ASSEMBLY
RD8
 
 
INJECTION-PUMP ASSEMBLY

Nissan-Diesel 

 
1671297505 
INJECTION-PUMP ASSEMBLY
RD8
Back to top