106861-0180 ZEXEL INJECTION-PUMP ASSEMBLY Calibration Data 1068610180 1671397505


106861-0180 INJECTION-PUMP ASSEMBLY
Rating:
17
Buy INJECTION-PUMP ASSEMBLY 106861-0180 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

ZEXEL 106861-0180 1068610180
NISSAN-DIESEL 1671397505 1671397505

Cross reference number

ZEXEL 106861-0180 1068610180
NISSAN-DIESEL 1671397505 1671397505


Zexel num
Bosch num
Firm num
Name
106861-0180 
 
1671397505  NISSAN-DIESEL
INJECTION-PUMP ASSEMBLY
RD8 * 14CD PE8P PE

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil
  ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle   105015-2780
Nozzle holder   105031-4140
Opening pressure MPa   19.6
Opening pressure kgf/cm2   200
Injection pipe
Outer diameter - inner diameter - length (mm)
mm   6-2-1050
Overflow valve   132424-0620
Overflow valve opening pressure kPa   157 123 191
Overflow valve opening pressure kgf/cm2   1.6 1.25 1.95
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
Direction of rotation (viewed from drive side)
Right
  R
Injection timing adjustment
Direction of rotation (viewed from drive side)
Right
  R
Injection order   1-8-7-5- 4-3-6-2
Pre-stroke mm   3.65 3.6 3.7
Beginning of injection position
Governor side
  NO.1
Difference between angles 1
Cal 1-8
deg.   45 44.5 45.5
Difference between angles 2
Cal 1-7
deg.   90 89.5 90.5
Difference between angles 3
Cal 1-5
deg.   135 134.5 135.5
Difference between angles 4
Cal 1-4
deg.   180 179.5 180.5
Difference between angles 5
Cal 1-3
deg.   225 224.5 225.5
Difference between angles 6
Cal 1-6
deg.   270 269.5 270.5
Difference between angles 7
Cyl.1-2
deg.   315 314.5 315.5
Injection quantity adjustment
Adjusting point   A
Rack position   9.8
Pump speed r/min   700 700 700
Average injection quantity mm3/st.   118 118 120
Max. variation between cylinders %   0 -4 4
Basic   *
Fixing the lever   *
Injection quantity adjustment_02
Adjusting point   B
Rack position   9.8
Pump speed r/min   1000 1000 1000
Average injection quantity mm3/st.   114.5 111.5 117.5
Max. variation between cylinders %   0 -4 4
Fixing the lever   *
Injection quantity adjustment_03
Adjusting point   C
Rack position   9.8
Pump speed r/min   1200 1200 1200
Average injection quantity mm3/st.   112.5 108.5 116.5
Max. variation between cylinders %   0 -4 4
Fixing the lever   *
Injection quantity adjustment_04
Adjusting point   D
Rack position   6.9+-0.5
Pump speed r/min   200 200 200
Average injection quantity mm3/st.   20 18 22
Max. variation between cylinders %   0 -10 10
Fixing the rack   *
Injection quantity adjustment_05
Adjusting point   E
Rack position   (10.4+0. 2)
Pump speed r/min   300 300 300
Average injection quantity mm3/st.   112 110 114
Fixing the lever   *
Timer adjustment
Pump speed r/min   300+100
Advance angle deg.   0 0 0
Remarks
Start
 
Timer adjustment_02
Pump speed r/min   700
Advance angle deg.   3 2.5 3.5
Timer adjustment_03
Pump speed r/min   1000
Advance angle deg.   5.6 5.1 6.1
Timer adjustment_04
Pump speed r/min   1250+50
Advance angle deg.   8 7.5 8.5
Remarks
Finish
 

Test data Ex:

Governor adjustment

Test data 106861-0180
N:Pump speed R:Rack position (mm) (1)Beginning of damper spring operation: DL (2)RACK LIMIT: RAL (3)Set minimum speed.
----------
DL=5.8-0.2mm RAL=(10.4+0.2)mm
----------

Speed control lever angle

Test data 106861-0180
F:Full speed M:Minimum-maximum speed
----------

----------
a=(12deg) b=(8deg)

0000000901

Test data 106861-0180
F:Full load I:Idle S:Stop
----------

----------
a=29.5deg+-3deg b=(15.5deg) c=16deg+-3deg

0000001501 MICRO SWITCH

Switch adjustment Adjust the bolt so that the lower lever position is obtained when the switch is turned ON. (1)Speed N1 (2)Rack position Ra
----------
N1=300r/min Ra=5.4mm
----------




Have questions with 106861-0180?





Group cross 106861-0180 ZEXEL

Nissan-Diesel 

 
1671397503 

RD8
 
1670097520 

RD8
 
1670097521 

 
1670097506 

 
 
INJECTION-PUMP ASSEMBLY

Nissan-Diesel 

9 400 617 941 
1670097507 
INJECTION-PUMP ASSEMBLY
RD8
 
1670097510 

RD8
106861-0180  
 
1671397505 
INJECTION-PUMP ASSEMBLY
RD8
 
1670097511 
INJECTION-PUMP ASSEMBLY
RD8
Back to top