Fuel injectors
  1. Home
  2. injection
  3. #1066929341

106692-9341 ZEXEL INJECTION-PUMP ASSEMBLY Calibration Data 1066929341


106692-9341 INJECTION-PUMP ASSEMBLY
Rating:
23
Buy INJECTION-PUMP ASSEMBLY 106692-9341 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

ZEXEL 106692-9341 1066929341

Service parts 106692-9341 INJECTION-PUMP ASSEMBLY:

1. _
2. FUEL INJECTION PUMP 106069-7392
3. GOVERNOR 105407-6240
4. SUPPLY PUMP 105237-1890
5. AUTOM. ADVANCE MECHANIS
6. COUPLING PLATE 105664-0400
7. COUPLING PLATE
8. _
9. _
10. NOZZLE AND HOLDER ASSY
11. Nozzle and Holder
12. Open Pre:MPa(Kqf/cm2)
13. NOZZLE-HOLDER
14. NOZZLE
15. NOZZLE SET

Include in #1:

106692-9341 as INJECTION-PUMP ASSEMBLY

Cross reference number

ZEXEL 106692-9341 1066929341


Zexel num
Bosch num
Firm num
Name
106692-9341 
 
   
INJECTION-PUMP ASSEMBLY

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil   ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8140
Bosch type code   EF8511/9A
Nozzle   105780-0000
Bosch type code   DN12SD12T
Nozzle holder   105780-2080
Bosch type code   EF8511/9
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm) mm   8-3-600
Overflow valve   131424-1520
Overflow valve opening pressure kPa   157 123 191
Overflow valve opening pressure kgf/cm2   1.6 1.25 1.95
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
Direction of rotation (viewed from drive side)
Right   R
Injection timing adjustment
Direction of rotation (viewed from drive side)
Right   R
Injection order   1-4-2-6- 3-5
Pre-stroke mm   4.1 4.05 4.15
Beginning of injection position
Drive side   NO.1
Difference between angles 1
Cal 1-4 deg.   60 59.5 60.5
Difference between angles 2
Cyl.1-2 deg.   120 119.5 120.5
Difference between angles 3
Cal 1-6 deg.   180 179.5 180.5
Difference between angles 4
Cal 1-3 deg.   240 239.5 240.5
Difference between angles 5
Cal 1-5 deg.   300 299.5 300.5
Injection quantity adjustment
Adjusting point   A
Rack position   13.4
Pump speed r/min   900 900 900
Each cylinder's injection qty mm3/st.   243 235.7 250.3
Basic   *
Fixing the lever   *
Injection quantity adjustment_02
Adjusting point   B
Rack position   5.8+-0.5
Pump speed r/min   350 350 350
Each cylinder's injection qty mm3/st.   26 23.4 28.6
Fixing the rack   *

Test data Ex:

Governor adjustment

Test data 106692-9341
N:Pump speed R:Rack position (mm) (1)Target notch: K (2)Tolerance for racks not indicated: +-0.05mm. (3)Idle spring not operating. (4)Set to avoid rack limit. (5)Set idle sub-spring
----------
K=4
----------

Speed control lever angle

Test data 106692-9341
F:Full speed I:Idle S:Stop
----------

----------
a=57deg+-3deg b=24deg+-5deg c=23deg+-5deg

Stop lever angle

Test data 106692-9341
N:Pump normal S:Stop the pump.
----------

----------
a=20deg+-5deg b=53deg+-5deg

Timing setting

Test data 106692-9341
(1)Pump vertical direction (2)Coupling's key groove position at No 1 cylinder's beginning of injection (3)- (4)-
----------

----------
a=(60deg)




Have questions with 106692-9341?





Group cross 106692-9341 ZEXEL

106692-9340  
 
 
INJECTION-PUMP ASSEMBLY
106692-9341  
 
 
INJECTION-PUMP ASSEMBLY

Yanmar 

106692-9342  

106692-9343 
 
12666051020 
INJECTION-PUMP ASSEMBLY
6HAL2-N
106692-9343  
 
 
INJECTION-PUMP ASSEMBLY
6HAL2-N

Yanmar 

106692-9344  

106692-9345 
9 400 612 134 
12666051021 
INJECTION-PUMP ASSEMBLY
6HAL2
106692-9345  
9 400 612 577 
12666051022 
INJECTION-PUMP ASSEMBLY
6HAL2
Back to top