Fuel injectors
  1. Home
  2. injection
  3. #1066921111

106692-1111 ZEXEL INJECTION-PUMP ASSEMBLY Calibration Data 1066921111 1156012881


106692-1111 INJECTION-PUMP ASSEMBLY
Rating:
9
Buy INJECTION-PUMP ASSEMBLY 106692-1111 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

ZEXEL 106692-1111 1066921111
ISUZU 1156012881 1156012881

Cross reference number

ZEXEL 106692-1111 1066921111
ISUZU 1156012881 1156012881


Zexel num
Bosch num
Firm num
Name
106692-1111 
106692-1112 
 
1156012881  ISUZU
INJECTION-PUMP ASSEMBLY
6RB1T *

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil   ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8140
Bosch type code   EF8511/9A
Nozzle   105780-0000
Bosch type code   DN12SD12T
Nozzle holder   105780-2080
Bosch type code   EF8511/9
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm) mm   8-3-600
Overflow valve   132424-0620
Overflow valve opening pressure kPa   157 123 191
Overflow valve opening pressure kgf/cm2   1.6 1.25 1.95
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
Direction of rotation (viewed from drive side)
Right   R
Injection timing adjustment
Direction of rotation (viewed from drive side)
Right   R
Injection order   1-4-2-6- 3-5
Pre-stroke mm   3 2.95 3.05
Beginning of injection position
Drive side   NO.1
Difference between angles 1
Cal 1-4 deg.   60 59.5 60.5
Difference between angles 2
Cyl.1-2 deg.   120 119.5 120.5
Difference between angles 3
Cal 1-6 deg.   180 179.5 180.5
Difference between angles 4
Cal 1-3 deg.   240 239.5 240.5
Difference between angles 5
Cal 1-5 deg.   300 299.5 300.5
Injection quantity adjustment
Adjusting point   A
Rack position   9.8
Pump speed r/min   900 900 900
Average injection quantity mm3/st.   174.5 172.5 176.5
Max. variation between cylinders %   0 -3 3
Basic   *
Fixing the lever   *
Injection quantity adjustment_02
Adjusting point   B
Rack position   5.2+-0.5
Pump speed r/min   325 325 325
Average injection quantity mm3/st.   11.4 8.2 14.6
Max. variation between cylinders %   0 -13 13
Fixing the rack   *
Injection quantity adjustment_03
Adjusting point   C
Rack position   -
Pump speed r/min   150 150 150
Average injection quantity mm3/st.   160 160
Fixing the lever   *
Rack limit   *

Test data Ex:

Governor adjustment

Test data 106692-1111
N:Pump speed R:Rack position (mm) (1)Target notch: K (2)Tolerance for racks not indicated: +-0.05mm. (3)RACK LIMIT
----------
K=6
----------

Speed control lever angle

Test data 106692-1111
F:Full speed I:Idle S:Stop
----------

----------
a=0deg+-5deg b=25deg+-5deg c=32deg+-3deg

Stop lever angle

Test data 106692-1111
N:Pump normal S:Stop the pump. (1)Normal
----------

----------
a=22deg+-5deg b=46deg+-5deg




Have questions with 106692-1111?





Group cross 106692-1111 ZEXEL

Isuzu 

106692-1100  
9 400 617 805 
1156012581 
INJECTION-PUMP ASSEMBLY
6RB1
106692-1110  

106692-1112 
 
1156012880 
INJECTION-PUMP ASSEMBLY
6RB1T
106692-1111  

106692-1112 
 
1156012881 
INJECTION-PUMP ASSEMBLY
6RB1T
106692-1112  
9 400 617 806 
1156012883 
INJECTION-PUMP ASSEMBLY
6RB1-T
106692-1120  
 
1156013430 
INJECTION-PUMP ASSEMBLY
6RB1T
106692-1130  
 
1156014421 
INJECTION-PUMP ASSEMBLY
6RB1T
106692-1140  
 
1156018500 
INJECTION-PUMP ASSEMBLY
6RB1-T
106692-1150  
9 400 617 807 
1156015652 
INJECTION-PUMP ASSEMBLY
6RB1
106692-1160  
9 400 617 808 
1156016780 
INJECTION-PUMP ASSEMBLY
E120
106692-1170  
F 019 Z10 045 
1156018280 
INJECTION-PUMP ASSEMBLY
6RB1T
106692-1180  
 
1156018260 
INJECTION-PUMP ASSEMBLY
6RB1T
106692-1190  
 
1156018400 
INJECTION-PUMP ASSEMBLY
6RB1
Back to top