Fuel injectors
  1. Home
  2. injection
  3. #1066921100

106692-1100 ZEXEL 9 400 617 805 BOSCH INJECTION-PUMP ASSEMBLY 9400617805 1066921100 1156012581


106692-1100 INJECTION-PUMP ASSEMBLY
Rating:
8
Buy INJECTION-PUMP ASSEMBLY 106692-1100 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH 9 400 617 805 9400617805
ZEXEL 106692-1100 1066921100
ISUZU 1156012581 1156012581

Service parts 106692-1100 INJECTION-PUMP ASSEMBLY:

1. _
2. FUEL INJECTION PUMP 106069-1261
3. GOVERNOR 105407-1940
4. SUPPLY PUMP 105237-1570
5. AUTOM. ADVANCE MECHANIS
6. COUPLING PLATE 105662-0350
7. COUPLING PLATE 156612-4220
8. _
9. _
10. NOZZLE AND HOLDER ASSY 105101-4891
11. Nozzle and Holder
12. Open Pre:MPa(Kqf/cm2) 22.1{225}
13. NOZZLE-HOLDER 105031-4171
14. NOZZLE 105015-3520
15. NOZZLE SET

Include in #1:

106692-1100 as INJECTION-PUMP ASSEMBLY

Cross reference number

BOSCH 9 400 617 805 9400617805
ZEXEL 106692-1100 1066921100
ISUZU 1156012581 1156012581


Zexel num
Bosch num
Firm num
Name
106692-1100 
9 400 617 805 
1156012581  ISUZU
INJECTION-PUMP ASSEMBLY
6RB1 * K 14CA PE6P,6PD PE

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil   ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8140
Bosch type code   EF8511/9A
Nozzle   105780-0000
Bosch type code   DN12SD12T
Nozzle holder   105780-2080
Bosch type code   EF8511/9
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm) mm   8-3-600
Overflow valve opening pressure kPa   157 123 191
Overflow valve opening pressure kgf/cm2   1.6 1.25 1.95
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
Direction of rotation (viewed from drive side)
Right   R
Injection timing adjustment
Direction of rotation (viewed from drive side)
Right   R
Injection order   1-4-2-6- 3-5
Pre-stroke mm   3 2.95 3.05
Beginning of injection position
Drive side   NO.1
Difference between angles 1
Cal 1-4 deg.   60 59.5 60.5
Difference between angles 2
Cyl.1-2 deg.   120 119.5 120.5
Difference between angles 3
Cal 1-6 deg.   180 179.5 180.5
Difference between angles 4
Cal 1-3 deg.   240 239.5 240.5
Difference between angles 5
Cal 1-5 deg.   300 299.5 300.5
Injection quantity adjustment
Adjusting point   A
Rack position   8.1
Pump speed r/min   1000 1000 1000
Average injection quantity mm3/st.   123.2 121.2 125.2
Max. variation between cylinders %   0 -3 3
Basic   *
Fixing the lever   *
Injection quantity adjustment_02
Adjusting point   B
Rack position   4.6+-0.5
Pump speed r/min   300 300 300
Average injection quantity mm3/st.   13.4 10.2 16.6
Max. variation between cylinders %   0 -13 13
Fixing the rack   *

Test data Ex:

Governor adjustment

Test data 106692-1100
N:Pump speed R:Rack position (mm) (1)Target notch: K
----------
K=9
----------

Speed control lever angle

Test data 106692-1100
F:Full speed I:Idle (1)Stopper bolt setting
----------

----------
a=1deg+-5deg b=25deg+-5deg

Stop lever angle

Test data 106692-1100
N:Pump normal S:Stop the pump.
----------

----------
a=10deg+-5deg b=53deg+-5deg




Have questions with 106692-1100?





Group cross 106692-1100 ZEXEL

Isuzu 

106692-1100  
9 400 617 805 
1156012581 
INJECTION-PUMP ASSEMBLY
6RB1
106692-1110  

106692-1112 
 
1156012880 
INJECTION-PUMP ASSEMBLY
6RB1T
106692-1111  

106692-1112 
 
1156012881 
INJECTION-PUMP ASSEMBLY
6RB1T
106692-1112  
9 400 617 806 
1156012883 
INJECTION-PUMP ASSEMBLY
6RB1-T
106692-1120  
 
1156013430 
INJECTION-PUMP ASSEMBLY
6RB1T
106692-1130  
 
1156014421 
INJECTION-PUMP ASSEMBLY
6RB1T
106692-1140  
 
1156018500 
INJECTION-PUMP ASSEMBLY
6RB1-T
106692-1150  
9 400 617 807 
1156015652 
INJECTION-PUMP ASSEMBLY
6RB1
106692-1160  
9 400 617 808 
1156016780 
INJECTION-PUMP ASSEMBLY
E120
106692-1170  
F 019 Z10 045 
1156018280 
INJECTION-PUMP ASSEMBLY
6RB1T
106692-1180  
 
1156018260 
INJECTION-PUMP ASSEMBLY
6RB1T
106692-1190  
 
1156018400 
INJECTION-PUMP ASSEMBLY
6RB1
Back to top