106691-6561 ZEXEL INJECTION-PUMP ASSEMBLY Calibration Data 1066916561 1156007575

Information Cross number Calibration Data Calibration Data Ex

Price: query
Buy now
Add to cart Go to cart

Rating:

Buy INJECTION-PUMP ASSEMBLY 106691-6561 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

ZEXEL 106691-6561 1066916561

ISUZU 1156007575 1156007575

Service parts 106691-6561 INJECTION-PUMP ASSEMBLY:

1. _

2. FUEL INJECTION PUMP 106069-1141

3. GOVERNOR 105467-0520

4. SUPPLY PUMP 105237-1231

5. AUTOM. ADVANCE MECHANIS 105644-0090

6. COUPLING PLATE 105662-0630

7. COUPLING PLATE

8. _

9. _

10. NOZZLE AND HOLDER ASSY 105101-4891

11. Nozzle and Holder 1-15300-041-2

12. Open Pre:MPa(Kqf/cm2) 22.1{225}

13. NOZZLE-HOLDER 105031-4171

14. NOZZLE

105015-3520

15. NOZZLE SET

Include in #1:

106691-6561 as INJECTION-PUMP ASSEMBLY

Cross reference number

ZEXEL 106691-6561 1066916561

ISUZU 1156007575 1156007575

Zexel num

Bosch num

Firm num

Name

106691-6561
106691-6562

1156007575 ISUZU

INJECTION-PUMP ASSEMBLY
6RB1 * K

Calibration Data:

Adjustment conditions

Test oil
1404 Test oil ISO4113 or {SAEJ967d}

Test oil temperature degC 40 40 45

Nozzle and nozzle holder 105780-8140

Bosch type code EF8511/9A

Nozzle 105780-0000

Bosch type code DN12SD12T

Nozzle holder 105780-2080

Bosch type code EF8511/9

Opening pressure MPa 17.2

Opening pressure kgf/cm2 175

Injection pipe
Outer diameter - inner diameter - length (mm) mm 8-3-600

Overflow valve opening pressure kPa 127 107 147

Overflow valve opening pressure kgf/cm2 1.3 1.1 1.5

Tester oil delivery pressure kPa 157 157 157

Tester oil delivery pressure kgf/cm2 1.6 1.6 1.6

Direction of rotation (viewed from drive side)
Right R

Injection timing adjustment

Direction of rotation (viewed from drive side)
Right R

Injection order 1-4-2-6- 3-5

Pre-stroke mm 3 2.95 3.05

Beginning of injection position
Drive side NO.1

Difference between angles 1
Cal 1-4 deg. 60 59.5 60.5

Difference between angles 2
Cyl.1-2 deg. 120 119.5 120.5

Difference between angles 3
Cal 1-6 deg. 180 179.5 180.5

Difference between angles 4
Cal 1-3 deg. 240 239.5 240.5

Difference between angles 5
Cal 1-5 deg. 300 299.5 300.5

Injection quantity adjustment

Adjusting point B

Rack position 8.9

Pump speed r/min 650 650 650

Average injection quantity mm3/st. 133.9 131.9 135.9

Max. variation between cylinders % 0 -3 3

Basic *

Fixing the lever *

Injection quantity adjustment_02

Adjusting point C

Rack position 5.3+-0.5

Pump speed r/min 225 225 225

Average injection quantity mm3/st. 12.6 9.4 15.8

Max. variation between cylinders % 0 -13 13

Fixing the rack *

Timer adjustment

Pump speed r/min 500

Advance angle deg. 0.3

Timer adjustment_02

Pump speed r/min 700

Advance angle deg. 1 0.1 1

Timer adjustment_03

Pump speed r/min 900

Advance angle deg. 1.2 0.7 1.7

Timer adjustment_04

Pump speed r/min 1100

Advance angle deg. 2 1.5 2.5

Remarks
Finish

Test data Ex:

Governor adjustment

N:Pump speed R:Rack position (mm) (1)Beginning of damper spring operation: DL (2)Excess fuel setting for starting: SXL (3)Rack difference between N = N1 and N = N2
----------
DL=3.7-0.5mm SXL=9.2+0.2mm N1=1100r/min N2=650r/min
----------

0000000901

F:Full load I:Idle S:Stop (1)Attach the return spring to the upper hole and adjust. (2)Rack position aa (pump speed bb r/min )
----------
aa=4.8mm bb=0r/min
----------
a=1.5deg+-5deg b=15deg+-5deg c=31deg+-3deg

Stop lever angle

N:Pump normal S:Stop the pump.
----------

----------
a=32deg+-5deg b=64deg+-5deg

Timing setting

(1)Pump vertical direction (2)Position of timer's threaded hole at No 1 cylinder's beginning of injection (3)B.T.D.C.: aa (4)-
----------
aa=21deg
----------
a=(70deg)