106691-6450 ZEXEL 9 400 617 795 BOSCH INJECTION-PUMP ASSEMBLY 9400617795 1066916450 1156007342


106691-6450 INJECTION-PUMP ASSEMBLY
Rating:
8
Buy INJECTION-PUMP ASSEMBLY 106691-6450 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH 9 400 617 795 9400617795
ZEXEL 106691-6450 1066916450
ISUZU 1156007342 1156007342

Service parts 106691-6450 INJECTION-PUMP ASSEMBLY:

1. _
2. FUEL INJECTION PUMP 106069-1141
3. GOVERNOR 105407-0960
4. SUPPLY PUMP 105237-1221
5. AUTOM. ADVANCE MECHANIS 105644-0050
6. COUPLING PLATE 105662-0630
7. COUPLING PLATE
8. _
9. _
10. NOZZLE AND HOLDER ASSY 105101-4891
11. Nozzle and Holder 1-15300-041-2
12. Open Pre:MPa(Kqf/cm2) 22.1{225}
13. NOZZLE-HOLDER 105031-4171
14. NOZZLE 105015-3520
15. NOZZLE SET

Include in #1:

106691-6450 as INJECTION-PUMP ASSEMBLY

Cross reference number

BOSCH 9 400 617 795 9400617795
ZEXEL 106691-6450 1066916450
ISUZU 1156007342 1156007342


Zexel num
Bosch num
Firm num
Name
106691-6450 
9 400 617 795 
1156007342  ISUZU
INJECTION-PUMP ASSEMBLY
E120T K 14CA INJECTION PUMP ASSY PE6P,6PD PE

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil
  ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8140
Bosch type code   EF8511/9A
Nozzle   105780-0000
Bosch type code   DN12SD12T
Nozzle holder   105780-2080
Bosch type code   EF8511/9
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm)
mm   8-3-600
Overflow valve   132424-0620
Overflow valve opening pressure kPa   157 123 191
Overflow valve opening pressure kgf/cm2   1.6 1.25 1.95
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
Direction of rotation (viewed from drive side)
Right
  R
Injection timing adjustment
Direction of rotation (viewed from drive side)
Right
  R
Injection order   1-4-2-6- 3-5
Pre-stroke mm   3 2.95 3.05
Beginning of injection position
Drive side
  NO.1
Difference between angles 1
Cal 1-4
deg.   60 59.5 60.5
Difference between angles 2
Cyl.1-2
deg.   120 119.5 120.5
Difference between angles 3
Cal 1-6
deg.   180 179.5 180.5
Difference between angles 4
Cal 1-3
deg.   240 239.5 240.5
Difference between angles 5
Cal 1-5
deg.   300 299.5 300.5
Injection quantity adjustment
Adjusting point   A
Rack position   9.5
Pump speed r/min   1100 1100 1100
Average injection quantity mm3/st.   156 152.2 159.8
Max. variation between cylinders %   0 -3 3
Basic   *
Fixing the lever   *
Injection quantity adjustment_02
Adjusting point   B
Rack position   9.5+-0.5
Pump speed r/min   700 700 700
Average injection quantity mm3/st.   153 149.2 156.8
Max. variation between cylinders %   0 -3 3
Fixing the lever   *
Injection quantity adjustment_03
Adjusting point   C
Rack position   4.7+-0.5
Pump speed r/min   300 300 300
Average injection quantity mm3/st.   12 8.8 15.2
Max. variation between cylinders %   0 -13 13
Fixing the rack   *
Timer adjustment
Pump speed r/min   700
Advance angle deg.   0.3
Timer adjustment_02
Pump speed r/min   800
Advance angle deg.   1 0.1 1
Timer adjustment_03
Pump speed r/min   1000
Advance angle deg.   2 1.5 2.5
Timer adjustment_04
Pump speed r/min   1200
Advance angle deg.   4.5 4 5
Remarks
Finish
 

Test data Ex:

Governor adjustment

Test data 106691-6450
N:Pump speed R:Rack position (mm) (1)Target notch: K (2)Tolerance for racks not indicated: +-0.05mm.
----------
K=14
----------

Speed control lever angle

Test data 106691-6450
F:Full speed I:Idle S:Stop
----------

----------
a=12deg+-5deg b=30deg+-5deg c=32deg+-3deg

Stop lever angle

Test data 106691-6450
N:Pump normal S:Stop the pump. (1)Normal
----------

----------
a=19deg+-5deg b=53deg+-5deg

Timing setting

Test data 106691-6450
(1)Pump vertical direction (2)Position of timer's threaded hole at No 1 cylinder's beginning of injection (3)B.T.D.C.: aa (4)-
----------
aa=19deg
----------
a=(70deg)




Have questions with 106691-6450?





Group cross 106691-6450 ZEXEL

Isuzu 

 
1156006801 
INJECTION-PUMP ASSEMBLY
E120
9 400 617 794 
1156006854 
INJECTION-PUMP ASSEMBLY
E120T
 
1156006862 
INJECTION-PUMP ASSEMBLY
E120T
 
1156006875 
INJECTION-PUMP ASSEMBLY
E120T
 
1156006884 

E120T
106691-6450  
9 400 617 795 
1156007342 
INJECTION-PUMP ASSEMBLY
E120T
 
1156007470 
INJECTION-PUMP ASSEMBLY
E120
 
1156007980 
INJECTION-PUMP ASSEMBLY
E120
 
1156007500 

E120T
 
1156007510 

E120T
Back to top