106691-3000 ZEXEL INJECTION-PUMP ASSEMBLY Calibration Data 1066913000 220002030c


106691-3000 INJECTION-PUMP ASSEMBLY
Rating:
22
Buy INJECTION-PUMP ASSEMBLY 106691-3000 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

ZEXEL 106691-3000 1066913000
HINO 220002030C 220002030c

Service parts 106691-3000 INJECTION-PUMP ASSEMBLY:

1. _
2. FUEL INJECTION PUMP 106069-5000
3. GOVERNOR 105306-0550
4. SUPPLY PUMP 105207-1020
5. AUTOM. ADVANCE MECHANIS
6. COUPLING PLATE 105662-0500
7. COUPLING PLATE
8. _
9. _
10. NOZZLE AND HOLDER ASSY 105100-4902
11. Nozzle and Holder 23600-1232
12. Open Pre:MPa(Kqf/cm2) 21.6{220}
13. NOZZLE-HOLDER 105031-4352
14. NOZZLE 105015-4550
15. NOZZLE SET

Include in #1:

106691-3000 as INJECTION-PUMP ASSEMBLY

Cross reference number

ZEXEL 106691-3000 1066913000
HINO 220002030C 220002030c


Zexel num
Bosch num
Firm num
Name
106691-3000 
106691-3001 
 
220002030C  HINO
INJECTION-PUMP ASSEMBLY
ER200 *

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil
  ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8140
Bosch type code   EF8511/9A
Nozzle   105780-0000
Bosch type code   DN12SD12T
Nozzle holder   105780-2080
Bosch type code   EF8511/9
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm)
mm   8-3-600
Overflow valve   134424-0920
Overflow valve opening pressure kPa   177 143 211
Overflow valve opening pressure kgf/cm2   1.8 1.45 2.15
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
Direction of rotation (viewed from drive side)
Right
  R
Injection timing adjustment
Direction of rotation (viewed from drive side)
Right
  R
Injection order   1-4-2-6- 3-5
Pre-stroke mm   3.45 3.4 3.5
Beginning of injection position
Drive side
  NO.1
Difference between angles 1
Cal 1-4
deg.   60 59.5 60.5
Difference between angles 2
Cyl.1-2
deg.   120 119.5 120.5
Difference between angles 3
Cal 1-6
deg.   180 179.5 180.5
Difference between angles 4
Cal 1-3
deg.   240 239.5 240.5
Difference between angles 5
Cal 1-5
deg.   300 299.5 300.5
Injection quantity adjustment
Adjusting point   A
Rack position   8.9
Pump speed r/min   500 500 500
Average injection quantity mm3/st.   102 99 105
Max. variation between cylinders %   0 -4 4
Fixing the lever   *
Injection quantity adjustment_02
Adjusting point   B
Rack position   8.9
Pump speed r/min   700 700 700
Average injection quantity mm3/st.   112 110 114
Max. variation between cylinders %   0 -2 2
Basic   *
Fixing the lever   *
Injection quantity adjustment_03
Adjusting point   C
Rack position   8.9
Pump speed r/min   1150 1150 1150
Average injection quantity mm3/st.   120 117 123
Max. variation between cylinders %   0 -4 4
Fixing the lever   *
Injection quantity adjustment_04
Adjusting point   D
Rack position   4.4+-0.5
Pump speed r/min   225 225 225
Average injection quantity mm3/st.   11 8 14
Max. variation between cylinders %   0 -15 15
Fixing the rack   *
Injection quantity adjustment_05
Adjusting point   E
Rack position   8.9+0.2
Pump speed r/min   330 330 330
Average injection quantity mm3/st.   97 94 100
Fixing the lever   *
Remarks
After startup boost setting
 
Injection quantity adjustment_06
Adjusting point   F
Rack position   14.4+-0. 5
Pump speed r/min   100 100 100
Average injection quantity mm3/st.   187 187 207
Fixing the lever   *
Remarks
After startup boost setting
 
Timer adjustment
Pump speed r/min   950+-50
Advance angle deg.   0 0 0
Remarks
Start
 
Timer adjustment_02
Pump speed r/min   1150
Advance angle deg.   2 1.5 2.5
Remarks
Finish
 

Test data Ex:

Governor adjustment

Test data 106691-3000
N:Pump speed R:Rack position (mm) (1)Beginning of damper spring operation: DL (2)After adjusting the solid line, set the lever at the dotted line position. (3)Excess fuel setting for starting: SXL (4)Damper spring setting
----------
DL=2.4-0.2mm SXL=8.9+0.2mm
----------

0000000901

Test data 106691-3000
F:Full load I:Idle S:Stop
----------

----------
a=66deg+-5deg b=20deg+-3deg c=91deg+-5deg

0000001501 MICRO SWITCH

Switch adjustment Adjust the bolt so that the lower lever position is obtained when the switch is turned ON. (1)Speed N1 (2)Rack position Ra
----------
N1=300+25r/min Ra=4.4mm
----------




Have questions with 106691-3000?





Group cross 106691-3000 ZEXEL

Hino 

106691-3000  

106691-3001 
 
220002030C 
INJECTION-PUMP ASSEMBLY
ER200
 
220002031B 
INJECTION-PUMP ASSEMBLY
ER200
 
220002190A 
INJECTION-PUMP ASSEMBLY
ER200
9 400 617 782 
220002191B 
INJECTION-PUMP ASSEMBLY
ER200
 
220201480A 
INJECTION-PUMP ASSEMBLY
ER100
 
220201481A 
INJECTION-PUMP ASSEMBLY
ER100
 
220201483A 
INJECTION-PUMP ASSEMBLY
ER100
 
220201484A 
INJECTION-PUMP ASSEMBLY
ER100
 
220201570A 
INJECTION-PUMP ASSEMBLY
ER100
 
 
INJECTION-PUMP ASSEMBLY

Hino 

9 400 617 783 
220201572A 
INJECTION-PUMP ASSEMBLY
ER100
 
220003870A 
INJECTION-PUMP ASSEMBLY
ER200
 
220003871A 
INJECTION-PUMP ASSEMBLY
ER200
 
220201900A 
INJECTION-PUMP ASSEMBLY
ER100
9 400 617 784 
220004210A 
INJECTION-PUMP ASSEMBLY
ER200
 
220004380A 
INJECTION-PUMP ASSEMBLY
ER200
Back to top