Fuel injectors
  1. Home
  2. injection
  3. #1066894052

106689-4052 ZEXEL INJECTION-PUMP ASSEMBLY Calibration Data 1066894052 35a6501240


106689-4052 INJECTION-PUMP ASSEMBLY
Rating:
15
Buy INJECTION-PUMP ASSEMBLY 106689-4052 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

ZEXEL 106689-4052 1066894052
MITSUBISHI-HEAV 35A6501240 35a6501240

Service parts 106689-4052 INJECTION-PUMP ASSEMBLY:

1. _
2. FUEL INJECTION PUMP 106068-2660
3. GOVERNOR
4. SUPPLY PUMP 105237-1690
5. AUTOM. ADVANCE MECHANIS 105682-5040
6. COUPLING PLATE 105664-0670
7. COUPLING PLATE
8. _
9. _
10. NOZZLE AND HOLDER ASSY 105160-4080
11. Nozzle and Holder 35A61-00080
12. Open Pre:MPa(Kqf/cm2) 21.6{220}
13. NOZZLE-HOLDER 105030-4620
14. NOZZLE 105015-9950
15. NOZZLE SET

Include in #1:

106689-4052 as INJECTION-PUMP ASSEMBLY

Cross reference number

ZEXEL 106689-4052 1066894052
MITSUBISHI-HEAV 35A6501240 35a6501240


Zexel num
Bosch num
Firm num
Name
106689-4052 
106689-4053 
 
35A6501240  MITSUBISHI-HEAV
INJECTION-PUMP ASSEMBLY
S6A3 * K

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil   ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8130
Bosch type code   EFEP215A
Nozzle   105780-0050
Bosch type code   DN6TD119NP1T
Nozzle holder   105780-2090
Bosch type code   EFEP215
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm) mm   8-4-1000
Overflow valve   131424-3420
Overflow valve opening pressure kPa   255 221 289
Overflow valve opening pressure kgf/cm2   2.6 2.25 2.95
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
Direction of rotation (viewed from drive side)
Left   L
Injection timing adjustment
Direction of rotation (viewed from drive side)
Left   L
Injection order   1-5-3-6- 2-4
Pre-stroke mm   2.8 2.75 2.85
Beginning of injection position
Opposite to the driving side   NO.1
Difference between angles 1
Cal 1-5 deg.   60 59.5 60.5
Difference between angles 2
Cal 1-3 deg.   120 119.5 120.5
Difference between angles 3
Cal 1-6 deg.   180 179.5 180.5
Difference between angles 4
Cyl.1-2 deg.   240 239.5 240.5
Difference between angles 5
Cal 1-4 deg.   300 299.5 300.5
Injection quantity adjustment
Adjusting point   A
Rack position   14.3
Pump speed r/min   950 950 950
Average injection quantity mm3/st.   472 463 481
Max. variation between cylinders %   0 -3 3
Basic   *
Fixing the rack   *
Injection quantity adjustment_02
Adjusting point   B
Rack position   6.4+-0.5
Pump speed r/min   250 250 250
Average injection quantity mm3/st.   29.5 26.5 32.5
Max. variation between cylinders %   0 -10 10
Fixing the rack   *
Timer adjustment
Pump speed r/min   450--
Advance angle deg.   0 0 0
Remarks
Start  
Timer adjustment_02
Pump speed r/min   400
Advance angle deg.   0.5
Timer adjustment_03
Pump speed r/min   700
Advance angle deg.   4 3.5 4.5
Remarks
Finish  

Test data Ex:

Timing setting

Test data 106689-4052
(1)Pump vertical direction (2)Coupling's key groove position at No 1 cylinder's beginning of injection (3)- (4)-
----------

----------
a=(20deg)




Have questions with 106689-4052?





Group cross 106689-4052 ZEXEL

106689-4050  
 
 
INJECTION-PUMP ASSEMBLY
106689-4051  
 
 
INJECTION-PUMP ASSEMBLY

Mitsubishi-Heav 

106689-4052  

106689-4053 
 
35A6501240 
INJECTION-PUMP ASSEMBLY
S6A3
106689-4053  
 
 
INJECTION-PUMP ASSEMBLY

Mitsubishi-Heav 

106689-4054  

106689-4055 
9 400 610 991 
35A6511240 
INJECTION-PUMP ASSEMBLY
S6A3
106689-4055  

106689-4056 
9 400 612 436 
35A6521240 
INJECTION-PUMP ASSEMBLY
S6A3
106689-4056  
9 400 612 956 
35A6531240 
INJECTION-PUMP ASSEMBLY
S6A3
Back to top