Fuel injectors
  1. Home
  2. injection
  3. #1066894014

106689-4014 ZEXEL 9 400 611 285 BOSCH INJECTION-PUMP ASSEMBLY 9400611285 1066894014


106689-4014 INJECTION-PUMP ASSEMBLY
Rating:
26
Buy INJECTION-PUMP ASSEMBLY 106689-4014 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH 9 400 611 285 9400611285
ZEXEL 106689-4014 1066894014

Service parts 106689-4014 INJECTION-PUMP ASSEMBLY:

1. _
2. FUEL INJECTION PUMP 106068-2052
3. GOVERNOR
4. SUPPLY PUMP 105237-1690
5. AUTOM. ADVANCE MECHANIS 105682-0011
6. COUPLING PLATE 105664-0540
7. COUPLING PLATE
8. _
9. _
10. NOZZLE AND HOLDER ASSY 105111-4412
11. Nozzle and Holder 6215-11-3202
12. Open Pre:MPa(Kqf/cm2) 27.5{280}
13. NOZZLE-HOLDER 105041-7122
14. NOZZLE 105015-8070
15. NOZZLE SET

Include in #1:

106689-4014 as INJECTION-PUMP ASSEMBLY

Cross reference number

BOSCH 9 400 611 285 9400611285
ZEXEL 106689-4014 1066894014


Zexel num
Bosch num
Firm num
Name
106689-4014 
106689-4015 
9 400 611 285 
   
INJECTION-PUMP ASSEMBLY
SA12V140 * K 14CA PE6P,6PD PE

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil   ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8130
Bosch type code   EFEP215A
Nozzle   105780-0050
Bosch type code   DN6TD119NP1T
Nozzle holder   105780-2090
Bosch type code   EFEP215
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm) mm   8-4-1000
Overflow valve   131425-1620
Overflow valve opening pressure kPa   255 221 289
Overflow valve opening pressure kgf/cm2   2.6 2.25 2.95
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
Direction of rotation (viewed from drive side)
Right   R
Injection timing adjustment
Direction of rotation (viewed from drive side)
Right   R
Injection order   1-5-3-6- 2-4
Pre-stroke mm   3.5 3.45 3.55
Beginning of injection position
Drive side   NO.1
Difference between angles 1
Cal 1-5 deg.   60 59.5 60.5
Difference between angles 2
Cal 1-3 deg.   120 119.5 120.5
Difference between angles 3
Cal 1-6 deg.   180 179.5 180.5
Difference between angles 4
Cyl.1-2 deg.   240 239.5 240.5
Difference between angles 5
Cal 1-4 deg.   300 299.5 300.5
Injection quantity adjustment
Adjusting point   A
Rack position   15.8
Pump speed r/min   1050 1050 1050
Average injection quantity mm3/st.   391 388 394
Max. variation between cylinders %   0 -3 3
Basic   *
Fixing the rack   *
Remarks
Standard point A's rack position same as 106681-4026 in row L.  
Injection quantity adjustment_02
Adjusting point   -
Rack position   9.3+-0.5
Pump speed r/min   340 340 340
Average injection quantity mm3/st.   20 18.5 21.5
Max. variation between cylinders %   0 -15 15
Fixing the rack   *
Injection quantity adjustment_03
Remarks
Rack limit setting R = 17.1+0.2  
Timer adjustment
Pump speed r/min   (N1+50)- -
Advance angle deg.   0 0 0
Remarks
Start  
Timer adjustment_02
Pump speed r/min   N1
Advance angle deg.   0.5
Remarks
Measure the actual speed.  
Timer adjustment_03
Pump speed r/min   -
Advance angle deg.   2.5 2 3
Remarks
Measure the actual speed, stop  

Test data Ex:

Timing setting

Test data 106689-4014
(1)Pump vertical direction (2)Coupling's key groove position at No 1 cylinder's beginning of injection (3)- (4)-
----------

----------
a=(150deg)




Have questions with 106689-4014?





Group cross 106689-4014 ZEXEL

Komatsu 

106689-4010  

106689-4015 
 
6215711120 
INJECTION-PUMP ASSEMBLY
SA12V140
106689-4012  

106689-4015 
 
6215711121 
INJECTION-PUMP ASSEMBLY
SA12V140
106689-4013  
 
 
INJECTION-PUMP ASSEMBLY
106689-4014  

106689-4015 
9 400 611 285 
 
INJECTION-PUMP ASSEMBLY
SA12V140

Komatsu 

106689-4015  
9 400 613 129 
6215711122 
INJECTION-PUMP ASSEMBLY
SA12V140
Back to top