106685-4100 ZEXEL 9 400 617 702 BOSCH INJECTION-PUMP ASSEMBLY 9400617702 1066854100 6152751420

Information Cross number Calibration Data Calibration Data Ex

Price: query
Buy now
Add to cart Go to cart

Rating:

Buy INJECTION-PUMP ASSEMBLY 106685-4100 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH 9 400 617 702 9400617702

ZEXEL 106685-4100 1066854100

KOMATSU 6152751420 6152751420

Cross reference number

BOSCH 9 400 617 702 9400617702

ZEXEL 106685-4100 1066854100

KOMATSU 6152751420 6152751420

Zexel num

Bosch num

Firm num

Name

106685-4100
106685-4280

9 400 617 702

6152751420 KOMATSU

INJECTION-PUMP ASSEMBLY
6M122B * K

Calibration Data:

Adjustment conditions

Test oil
1404 Test oil ISO4113 or {SAEJ967d}

Test oil temperature degC 40 40 45

Nozzle and nozzle holder 105780-8130

Bosch type code EFEP215A

Nozzle 105780-0050

Bosch type code DN6TD119NP1T

Nozzle holder 105780-2090

Bosch type code EFEP215

Opening pressure MPa 17.2

Opening pressure kgf/cm2 175

Injection pipe
Outer diameter - inner diameter - length (mm) mm 8-4-1000

Overflow valve 131425-2120

Overflow valve opening pressure kPa 157 123 191

Overflow valve opening pressure kgf/cm2 1.6 1.25 1.95

Tester oil delivery pressure kPa 157 157 157

Tester oil delivery pressure kgf/cm2 1.6 1.6 1.6

Direction of rotation (viewed from drive side)
Left L

Injection timing adjustment

Direction of rotation (viewed from drive side)
Left L

Injection order 1-5-3-6- 2-4

Pre-stroke mm 3.3 3.25 3.35

Beginning of injection position
Drive side NO.1

Difference between angles 1
Cal 1-5 deg. 60 59.5 60.5

Difference between angles 2
Cal 1-3 deg. 120 119.5 120.5

Difference between angles 3
Cal 1-6 deg. 180 179.5 180.5

Difference between angles 4
Cyl.1-2 deg. 240 239.5 240.5

Difference between angles 5
Cal 1-4 deg. 300 299.5 300.5

Injection quantity adjustment

Adjusting point A

Rack position 14.6

Pump speed r/min 1150 1150 1150

Average injection quantity mm3/st. 418 413 423

Max. variation between cylinders % 0 -3 3

Basic *

Fixing the lever *

Boost pressure kPa 131 131

Boost pressure mmHg 980 980

Injection quantity adjustment_02

Adjusting point C

Rack position 7+-0.5

Pump speed r/min 275 275 275

Average injection quantity mm3/st. 29.5 27.5 31.5

Max. variation between cylinders % 0 -15 15

Fixing the rack *

Boost pressure kPa 0 0 0

Boost pressure mmHg 0 0 0

Boost compensator adjustment

Pump speed r/min 600 600 600

Rack position R1-3.9

Boost pressure kPa 30.7 28 33.4

Boost pressure mmHg 230 210 250

Boost compensator adjustment_02

Pump speed r/min 600 600 600

Rack position R1(14.6)

Boost pressure kPa 117 110.3 123.7

Boost pressure mmHg 880 830 930

Test data Ex:

Governor adjustment

N:Pump speed R:Rack position (mm) (1)Target notch: K (2)Tolerance for racks not indicated: +-0.05mm. (3)Boost compensator stroke
----------
K=9
----------

Speed control lever angle

F:Full speed I:Idle (1)Stopper bolt setting
----------

----------
a=1deg+-5deg b=37deg+-5deg

Stop lever angle

N:Pump normal S:Stop the pump. (1)No return spring
----------

----------
a=19deg+-5deg b=53deg+-5deg

Timing setting

(1)Pump vertical direction (2)Coupling's key groove position at No 1 cylinder's beginning of injection (3)B.T.D.C.: aa (4)-
----------
aa=25deg
----------
a=(150deg)