106684-4050 ZEXEL 9 400 610 315 BOSCH INJECTION-PUMP ASSEMBLY 9400610315 1066844050 35a6501330


106684-4050 INJECTION-PUMP ASSEMBLY
Rating:
32
Buy INJECTION-PUMP ASSEMBLY 106684-4050 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH 9 400 610 315 9400610315
ZEXEL 106684-4050 1066844050
MITSUBISHI-HEAV 35A6501330 35a6501330

Service parts 106684-4050 INJECTION-PUMP ASSEMBLY:

1. _
2. FUEL INJECTION PUMP 106068-2220
3. GOVERNOR
4. SUPPLY PUMP 105237-1690
5. AUTOM. ADVANCE MECHANIS
6. COUPLING PLATE 105664-0670
7. COUPLING PLATE 156638-2420
8. _
9. _
10. NOZZLE AND HOLDER ASSY 105101-6220
11. Nozzle and Holder 35A61-00010
12. Open Pre:MPa(Kqf/cm2) 21.6{220}
13. NOZZLE-HOLDER 105030-4320
14. NOZZLE 105015-8520
15. NOZZLE SET

Include in #1:

106684-4050 as INJECTION-PUMP ASSEMBLY

Cross reference number

BOSCH 9 400 610 315 9400610315
ZEXEL 106684-4050 1066844050
MITSUBISHI-HEAV 35A6501330 35a6501330


Zexel num
Bosch num
Firm num
Name
106684-4050 
106684-4051 
9 400 610 315 
35A6501330  MITSUBISHI-HEAV
INJECTION-PUMP ASSEMBLY
S6A3 * K 14CA PE6P,6PD PE

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil
  ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8130
Bosch type code   EFEP215A
Nozzle   105780-0050
Bosch type code   DN6TD119NP1T
Nozzle holder   105780-2090
Bosch type code   EFEP215
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm)
mm   8-4-1000
Overflow valve   131424-3420
Overflow valve opening pressure kPa   255 221 289
Overflow valve opening pressure kgf/cm2   2.6 2.25 2.95
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
Direction of rotation (viewed from drive side)
Left
  L
Injection timing adjustment
Direction of rotation (viewed from drive side)
Left
  L
Injection order   1-5-3-6- 2-4
Pre-stroke mm   2.8 2.75 2.85
Rack position
Point A
  R=A
Beginning of injection position
Opposite to the driving side
  NO.1
Difference between angles 1
Cal 1-5
deg.   60 59.5 60.5
Difference between angles 2
Cal 1-3
deg.   120 119.5 120.5
Difference between angles 3
Cal 1-6
deg.   180 179.5 180.5
Difference between angles 4
Cyl.1-2
deg.   240 239.5 240.5
Difference between angles 5
Cal 1-4
deg.   300 299.5 300.5
Injection quantity adjustment
Adjusting point   A
Rack position   13.6
Pump speed r/min   950 950 950
Average injection quantity mm3/st.   435 426 444
Max. variation between cylinders %   0 -3 3
Basic   *
Fixing the rack   *
Rack limit   *
Injection quantity adjustment_02
Adjusting point   B
Rack position   6.6+-0.5
Pump speed r/min   250 250 250
Average injection quantity mm3/st.   25 22 28
Max. variation between cylinders %   0 -10 10
Fixing the rack   *

Test data Ex:

Timing setting

Test data 106684-4050
(1)Pump vertical direction (2)Coupling's key groove position at No 1 cylinder's beginning of injection (3)- (4)-
----------

----------
a=(110deg)




Have questions with 106684-4050?





Group cross 106684-4050 ZEXEL

Mitsubishi-Heav 

106684-4050  

106684-4051 
9 400 610 315 
35A6501330 
INJECTION-PUMP ASSEMBLY
S6A3
 
 
INJECTION-PUMP ASSEMBLY

Mitsubishi-Heav 

9 400 610 986 
35A6511330 
INJECTION-PUMP ASSEMBLY
S6A3
9 400 612 547 
35A6521330 
INJECTION-PUMP ASSEMBLY
S6A3
9 400 612 809 
35A6531330 
INJECTION-PUMP ASSEMBLY
S6A3
Back to top