Fuel injectors
  1. Home
  2. injection
  3. #1066844013

106684-4013 ZEXEL 9 400 611 397 BOSCH INJECTION-PUMP ASSEMBLY 9400611397 1066844013


106684-4013 INJECTION-PUMP ASSEMBLY
Rating:
19
Buy INJECTION-PUMP ASSEMBLY 106684-4013 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH 9 400 611 397 9400611397
ZEXEL 106684-4013 1066844013

Service parts 106684-4013 INJECTION-PUMP ASSEMBLY:

1. _
2. FUEL INJECTION PUMP 106068-2072
3. GOVERNOR
4. SUPPLY PUMP 105237-1690
5. AUTOM. ADVANCE MECHANIS
6. COUPLING PLATE 105664-0540
7. COUPLING PLATE
8. _
9. _
10. NOZZLE AND HOLDER ASSY 105111-4402
11. Nozzle and Holder 6212-11-3202
12. Open Pre:MPa(Kqf/cm2) 24.5{250}
13. NOZZLE-HOLDER 105041-7122
14. NOZZLE 105015-8070
15. NOZZLE SET

Include in #1:

106684-4013 as INJECTION-PUMP ASSEMBLY

Cross reference number

BOSCH 9 400 611 397 9400611397
ZEXEL 106684-4013 1066844013


Zexel num
Bosch num
Firm num
Name
106684-4013 
106684-4014 
9 400 611 397 
   
INJECTION-PUMP ASSEMBLY
SA12V140 * K 14CA PE6P,6PD PE

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil   ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8130
Bosch type code   EFEP215A
Nozzle   105780-0050
Bosch type code   DN6TD119NP1T
Nozzle holder   105780-2090
Bosch type code   EFEP215
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm) mm   8-4-1000
Overflow valve   131425-1620
Overflow valve opening pressure kPa   255 221 289
Overflow valve opening pressure kgf/cm2   2.6 2.25 2.95
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
Direction of rotation (viewed from drive side)
Right   R
Injection timing adjustment
Direction of rotation (viewed from drive side)
Right   R
Injection order   1-5-3-6- 2-4
Pre-stroke mm   3.5 3.45 3.55
Beginning of injection position
Drive side   NO.1
Difference between angles 1
Cal 1-5 deg.   60 59.5 60.5
Difference between angles 2
Cal 1-3 deg.   120 119.5 120.5
Difference between angles 3
Cal 1-6 deg.   180 179.5 180.5
Difference between angles 4
Cyl.1-2 deg.   240 239.5 240.5
Difference between angles 5
Cal 1-4 deg.   300 299.5 300.5
Injection quantity adjustment
Adjusting point   A
Rack position   13.5
Pump speed r/min   1000 1000 1000
Average injection quantity mm3/st.   320.5 318.5 322.5
Max. variation between cylinders %   0 -3 3
Basic   *
Fixing the rack   *
Remarks
Standard point's rack position same as 106682-4444 in row L.  
Injection quantity adjustment_02
Adjusting point   -
Rack position   8.4+-0.5
Pump speed r/min   325 325 325
Average injection quantity mm3/st.   20 18.5 21.5
Max. variation between cylinders %   0 -15 15
Fixing the rack   *
Remarks
Adjust only variation between cylinders; adjust governor according to governor specifications.  
Injection quantity adjustment_03
Remarks
Rack limit setting R = 15.5+0.2  

Test data Ex:

Timing setting

Test data 106684-4013
(1)Pump vertical direction (2)Coupling's key groove position at No 1 cylinder's beginning of injection (3)- (4)-
----------

----------
a=(150deg)




Have questions with 106684-4013?





Group cross 106684-4013 ZEXEL

Komatsu 

106684-4010  

106684-4014 
 
6215711140 
INJECTION-PUMP ASSEMBLY
SA12V140
106684-4011  

106684-4014 
 
6215711141 
INJECTION-PUMP ASSEMBLY
SA12V140
106684-4012  
 
 
INJECTION-PUMP ASSEMBLY
106684-4013  

106684-4014 
9 400 611 397 
 
INJECTION-PUMP ASSEMBLY
SA12V140

Komatsu 

106684-4014  
9 400 617 654 
6215711142 
INJECTION-PUMP ASSEMBLY
SA12V140
Back to top