106682-9921 ZEXEL 9 400 613 323 BOSCH INJECTION-PUMP ASSEMBLY 9400613323 1066829921 6166711720

Information Cross number Calibration Data Calibration Data Ex

Price: query
Buy now
Add to cart Go to cart

Rating:

Buy INJECTION-PUMP ASSEMBLY 106682-9921 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH 9 400 613 323 9400613323

ZEXEL 106682-9921 1066829921

KOMATSU 6166711720 6166711720

Service parts 106682-9921 INJECTION-PUMP ASSEMBLY:

1. _

2. FUEL INJECTION PUMP 106068-3470

3. GOVERNOR 105447-2330

4. SUPPLY PUMP 105237-0220

5. AUTOM. ADVANCE MECHANIS

6. COUPLING PLATE

7. COUPLING PLATE

8. _

9. _

10. NOZZLE AND HOLDER ASSY 105111-4661

11. Nozzle and Holder

12. Open Pre:MPa(Kqf/cm2) 26.0{265}

13. NOZZLE-HOLDER 105041-7102

14. NOZZLE 105025-0910

15. NOZZLE SET

Include in #1:

106682-9921 as INJECTION-PUMP ASSEMBLY

Cross reference number

BOSCH 9 400 613 323 9400613323

ZEXEL 106682-9921 1066829921

KOMATSU 6166711720 6166711720

Zexel num

Bosch num

Firm num

Name

106682-9921

9 400 613 323

6166711720 KOMATSU

INJECTION-PUMP ASSEMBLY
SA12V170 K 14CA INJECTION PUMP ASSY PE6P,6PD PE

Calibration Data:

Adjustment conditions

Test oil
1404 Test oil ISO4113 or {SAEJ967d}

Test oil temperature degC 40 40 45

Nozzle and nozzle holder 105780-8130

Bosch type code EFEP215A

Nozzle 105780-0050

Bosch type code DN6TD119NP1T

Nozzle holder 105780-2090

Bosch type code EFEP215

Opening pressure MPa 17.2

Opening pressure kgf/cm2 175

Injection pipe
Outer diameter - inner diameter - length (mm) mm 8-4-1000

Overflow valve 131425-1620

Overflow valve opening pressure kPa 255 221 289

Overflow valve opening pressure kgf/cm2 2.6 2.25 2.95

Tester oil delivery pressure kPa 157 157 157

Tester oil delivery pressure kgf/cm2 1.6 1.6 1.6

Direction of rotation (viewed from drive side)
Left L

Injection timing adjustment

Direction of rotation (viewed from drive side)
Left L

Injection order 1-5-3-6- 2-4

Pre-stroke mm 2.8 2.75 2.85

Beginning of injection position
Drive side NO.1

Difference between angles 1
Cal 1-5 deg. 60 59.5 60.5

Difference between angles 2
Cal 1-3 deg. 120 119.5 120.5

Difference between angles 3
Cal 1-6 deg. 180 179.5 180.5

Difference between angles 4
Cyl.1-2 deg. 240 239.5 240.5

Difference between angles 5
Cal 1-4 deg. 300 299.5 300.5

Injection quantity adjustment

Adjusting point A

Rack position 14.8

Pump speed r/min 500 500 500

Average injection quantity mm3/st. 503 498 508

Max. variation between cylinders % 0 -3 3

Basic *

Fixing the rack *

Remarks
Standard point A's rack position same as row R

Injection quantity adjustment_02

Adjusting point C

Rack position 6.8+-0.5

Pump speed r/min 400 400 400

Average injection quantity mm3/st. 12.5 11 14

Max. variation between cylinders % 0 -15 15

Fixing the rack *

Test data Ex:

Governor adjustment

N:Pump speed R:Rack position (mm) (1)Target notch: K (2)Tolerance for racks not indicated: +-0.05mm. (3)RACK LIMIT for 106684-4340;RAL (4)Stop lever at stopping (with the stop lever at full) (5)Idle sub spring setting: L1.
----------
K=15 RAL=17+0.2mm L1=6.5-0.5mm
----------

Speed control lever angle

F:Full speed I:Idle (1)Set the pump speed at aa. ( At delivery ) (2)Set the pump speed at bb. (3)Stopper bolt setting
----------
aa=600r/min bb=500r/min
----------
a=5deg+-5deg b=8deg+-5deg c=17deg+-5deg

Stop lever angle

N:Normal S:Stop the pump.
----------

----------
a=36.5deg+-5deg b=53deg+-5deg

Timing setting

(1)Pump vertical direction (2)Position of spline gear's aligning mark at No 1 cylinder's beginning of injection (key position) (3)B.T.D.C.: aa (4)-
----------
aa=(20deg)
----------
a=(130deg)