Fuel injectors
  1. Home
  2. injection
  3. #1066824290

106682-4290 ZEXEL 9 400 617 545 BOSCH INJECTION-PUMP ASSEMBLY 9400617545 1066824290 1452610210


106682-4290 INJECTION-PUMP ASSEMBLY
Rating:
28
Buy INJECTION-PUMP ASSEMBLY 106682-4290 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH 9 400 617 545 9400617545
ZEXEL 106682-4290 1066824290
KUBOTA 1452610210 1452610210

Service parts 106682-4290 INJECTION-PUMP ASSEMBLY:

1. _
2. FUEL INJECTION PUMP 106068-5060
3. GOVERNOR 105447-5570
4. SUPPLY PUMP 105217-1321
5. AUTOM. ADVANCE MECHANIS
6. COUPLING PLATE
7. COUPLING PLATE
8. _
9. _
10. NOZZLE AND HOLDER ASSY 105110-4220
11. Nozzle and Holder
12. Open Pre:MPa(Kqf/cm2) 26.0{265}
13. NOZZLE-HOLDER 105041-5020
14. NOZZLE 105015-5130
15. NOZZLE SET

Include in #1:

106682-4290 as INJECTION-PUMP ASSEMBLY

Cross reference number

BOSCH 9 400 617 545 9400617545
ZEXEL 106682-4290 1066824290
KUBOTA 1452610210 1452610210


Zexel num
Bosch num
Firm num
Name
106682-4290 
9 400 617 545 
1452610210  KUBOTA
INJECTION-PUMP ASSEMBLY
LH105CS * K 14CA INJECTION PUMP ASSY PE6P,6PD PE

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil   ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8130
Bosch type code   EFEP215A
Nozzle   105780-0050
Bosch type code   DN6TD119NP1T
Nozzle holder   105780-2090
Bosch type code   EFEP215
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm) mm   8-3-600
Overflow valve opening pressure kPa   157 123 191
Overflow valve opening pressure kgf/cm2   1.6 1.25 1.95
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
Direction of rotation (viewed from drive side)
Right   R
Injection timing adjustment
Direction of rotation (viewed from drive side)
Right   R
Injection order   1-5-3-6- 2-4
Pre-stroke mm   3 2.95 3.05
Beginning of injection position
Drive side   NO.1
Difference between angles 1
Cal 1-5 deg.   60 59.5 60.5
Difference between angles 2
Cal 1-3 deg.   120 119.5 120.5
Difference between angles 3
Cal 1-6 deg.   180 179.5 180.5
Difference between angles 4
Cyl.1-2 deg.   240 239.5 240.5
Difference between angles 5
Cal 1-4 deg.   300 299.5 300.5
Injection quantity adjustment
Adjusting point   A
Rack position   11.6
Pump speed r/min   900 900 900
Each cylinder's injection qty mm3/st.   265 259.1 270.9
Basic   *
Fixing the rack   *
Injection quantity adjustment_02
Adjusting point   B
Rack position   6+-0.5
Pump speed r/min   300 300 300
Each cylinder's injection qty mm3/st.   30 25.5 34.5
Fixing the rack   *

Test data Ex:

Governor adjustment

Test data 106682-4290
N:Pump speed R:Rack position (mm) (1)Target notch: K (2)Idle sub spring setting: L1.
----------
K=14 L1=4.5-0.5mm
----------

Speed control lever angle

Test data 106682-4290
F:Full speed I:Idle S:Stop
----------

----------
a=18deg+-5deg b=32deg+-5deg c=33deg+-5deg

Stop lever angle

Test data 106682-4290
N:Pump normal S:Stop the pump.
----------

----------
a=(0deg) b=(53deg)

Timing setting

Test data 106682-4290
(1)Pump vertical direction (2)Coupling's key groove position at No 1 cylinder's beginning of injection (3)- (4)-
----------

----------
a=(40deg)




Have questions with 106682-4290?





Group cross 106682-4290 ZEXEL

Kubota 

106682-4200  
9 400 617 538 
 
INJECTION-PUMP ASSEMBLY
LH105
106682-4210  
9 400 617 539 
 
INJECTION-PUMP ASSEMBLY
LH105
106682-4220  
9 400 617 540 
 
INJECTION-PUMP ASSEMBLY
LH105
106682-4230  
9 400 617 541 
1452605200 
INJECTION-PUMP ASSEMBLY
LH105CS
106682-4240  
9 400 617 542 
 
INJECTION-PUMP ASSEMBLY
LH105
106682-4250  
9 400 617 543 
1452607200 
INJECTION-PUMP ASSEMBLY
LH105CS
106682-4260  
 
1452612210 
INJECTION-PUMP ASSEMBLY
LH105CS
106682-4270  
 
1452602210 
INJECTION-PUMP ASSEMBLY
LH105CS
106682-4280  
9 400 617 544 
1452603210 
INJECTION-PUMP ASSEMBLY
LH105CS
106682-4290  
9 400 617 545 
1452610210 
INJECTION-PUMP ASSEMBLY
LH105CS
Back to top