Fuel injectors
  1. Home
  2. injection
  3. #1066794150

106679-4150 ZEXEL F 01G 09U 1HT BOSCH INJECTION-PUMP ASSEMBLY f01g09u1ht 1066794150 3256542040


106679-4150 INJECTION-PUMP ASSEMBLY
Rating:
31
Buy INJECTION-PUMP ASSEMBLY 106679-4150 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH F 01G 09U 1HT f01g09u1ht
ZEXEL 106679-4150 1066794150
MITSUBISHI-HEAV 3256542040 3256542040

Service parts 106679-4150 INJECTION-PUMP ASSEMBLY:

1. _
2. FUEL INJECTION PUMP 106061-7190
3. GOVERNOR
4. SUPPLY PUMP 105207-1320
5. AUTOM. ADVANCE MECHANIS 105639-2160
6. COUPLING PLATE 105664-0420
7. COUPLING PLATE
8. _
9. _
10. NOZZLE AND HOLDER ASSY 105101-6121
11. Nozzle and Holder 32561-54010
12. Open Pre:MPa(Kqf/cm2) 21.6{220}
13. NOZZLE-HOLDER 105031-4761
14. NOZZLE 105015-8290
15. NOZZLE SET

Include in #1:

106679-4150 as INJECTION-PUMP ASSEMBLY

Cross reference number

BOSCH F 01G 09U 1HT f01g09u1ht
ZEXEL 106679-4150 1066794150
MITSUBISHI-HEAV 3256542040 3256542040


Zexel num
Bosch num
Firm num
Name
106679-4150 
106679-4151 
F 01G 09U 1HT 
3256542040  MITSUBISHI-HEAV
INJECTION-PUMP ASSEMBLY
S6A2 * K 14CA PE6P,6PD PE

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil   ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8130
Bosch type code   EFEP215A
Nozzle   105780-0050
Bosch type code   DN6TD119NP1T
Nozzle holder   105780-2090
Bosch type code   EFEP215
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm) mm   8-3-600
Overflow valve   131424-7420
Overflow valve opening pressure kPa   255 255 255
Overflow valve opening pressure kgf/cm2   2.6 2.6 2.6
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
Direction of rotation (viewed from drive side)
Left   L
Injection timing adjustment
Direction of rotation (viewed from drive side)
Left   L
Injection order   1-5-3-6- 2-4
Pre-stroke mm   3.9 3.85 3.95
Rack position
Point A   R=A
Beginning of injection position
Opposite to the driving side   NO.1
Difference between angles 1
Cal 1-5 deg.   60 59.5 60.5
Difference between angles 2
Cal 1-3 deg.   120 119.5 120.5
Difference between angles 3
Cal 1-6 deg.   180 179.5 180.5
Difference between angles 4
Cyl.1-2 deg.   240 239.5 240.5
Difference between angles 5
Cal 1-4 deg.   300 299.5 300.5
Injection quantity adjustment
Adjusting point   A
Rack position   15.1
Pump speed r/min   750 750 750
Average injection quantity mm3/st.   380 371 389
Max. variation between cylinders %   0 -3 3
Basic   *
Fixing the rack   *
Rack limit   *
Injection quantity adjustment_02
Adjusting point   -
Rack position   6.1+-0.5
Pump speed r/min   250 250 250
Average injection quantity mm3/st.   29.5 26.5 32.5
Max. variation between cylinders %   0 -10 10
Fixing the rack   *
Timer adjustment
Pump speed r/min   450--
Advance angle deg.   0 0 0
Remarks
Start  
Timer adjustment_02
Pump speed r/min   400
Advance angle deg.   0.5
Timer adjustment_03
Pump speed r/min   700
Advance angle deg.   4 3.5 4.5
Remarks
Finish  

Test data Ex:

Timing setting

Test data 106679-4150
(1)Pump vertical direction (2)Coupling's key groove position at No 1 cylinder's beginning of injection (3)- (4)-
----------

----------
a=(20deg)




Have questions with 106679-4150?





Group cross 106679-4150 ZEXEL

Mitsubishi-Heav 

106679-4150  

106679-4151 
F 01G 09U 1HT 
3256542040 
INJECTION-PUMP ASSEMBLY
S6A2
106679-4151  

106679-4152 
 
3256552040 
INJECTION-PUMP ASSEMBLY
S6A2
106679-4152  

106679-4153 
 
3256562040 
INJECTION-PUMP ASSEMBLY
S6A2
106679-4153  

106679-4154 
 
3256572040 
INJECTION-PUMP ASSEMBLY
S6A2
106679-4154  
9 400 617 480 
3256582040 
INJECTION-PUMP ASSEMBLY
S6A2
Back to top