Fuel injectors
  1. Home
  2. injection
  3. #1066794140

106679-4140 ZEXEL 9 400 619 663 BOSCH INJECTION-PUMP ASSEMBLY 9400619663 1066794140 3626513210


106679-4140 INJECTION-PUMP ASSEMBLY
Rating:
26
Buy INJECTION-PUMP ASSEMBLY 106679-4140 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH 9 400 619 663 9400619663
ZEXEL 106679-4140 1066794140
MITSUBISHI-HEAV 3626513210 3626513210

Service parts 106679-4140 INJECTION-PUMP ASSEMBLY:

1. _
2. FUEL INJECTION PUMP 106061-7170
3. GOVERNOR
4. SUPPLY PUMP 105207-1370
5. AUTOM. ADVANCE MECHANIS 105636-1960
6. COUPLING PLATE 105662-0710
7. COUPLING PLATE
8. _
9. _
10. NOZZLE AND HOLDER ASSY 105100-5171
11. Nozzle and Holder
12. Open Pre:MPa(Kqf/cm2) 21.6{220}
13. NOZZLE-HOLDER 105031-4441
14. NOZZLE 105015-4350
15. NOZZLE SET

Include in #1:

106679-4140 as INJECTION-PUMP ASSEMBLY

Cross reference number

BOSCH 9 400 619 663 9400619663
ZEXEL 106679-4140 1066794140
MITSUBISHI-HEAV 3626513210 3626513210


Zexel num
Bosch num
Firm num
Name
106679-4140 
106679-4141 
9 400 619 663 
3626513210  MITSUBISHI-HEAV
INJECTION-PUMP ASSEMBLY
S6B * K

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil   ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8140
Bosch type code   EF8511/9A
Nozzle   105780-0000
Bosch type code   DN12SD12T
Nozzle holder   105780-2080
Bosch type code   EF8511/9
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm) mm   8-3-600
Overflow valve   131424-7420
Overflow valve opening pressure kPa   255 221 289
Overflow valve opening pressure kgf/cm2   2.6 2.25 2.95
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
Direction of rotation (viewed from drive side)
Right   R
Injection timing adjustment
Direction of rotation (viewed from drive side)
Right   R
Injection order   1-5-3-6- 2-4
Pre-stroke mm   3.9 3.85 3.95
Beginning of injection position
Opposite to the driving side   NO.1
Difference between angles 1
Cal 1-5 deg.   60 59.5 60.5
Difference between angles 2
Cal 1-3 deg.   120 119.5 120.5
Difference between angles 3
Cal 1-6 deg.   180 179.5 180.5
Difference between angles 4
Cyl.1-2 deg.   240 239.5 240.5
Difference between angles 5
Cal 1-4 deg.   300 299.5 300.5
Injection quantity adjustment
Adjusting point   A
Rack position   14.5
Pump speed r/min   900 900 900
Average injection quantity mm3/st.   186.5 179.5 193.5
Max. variation between cylinders %   0 -3 3
Basic   *
Fixing the rack   *
Injection quantity adjustment_02
Adjusting point   -
Rack position   7.3+-0.5
Pump speed r/min   250 250 250
Average injection quantity mm3/st.   27 24 30
Max. variation between cylinders %   0 -10 10
Fixing the rack   *
Timer adjustment
Pump speed r/min   400
Advance angle deg.   0.5
Timer adjustment_02
Pump speed r/min   500
Advance angle deg.   0.9
Timer adjustment_03
Pump speed r/min   700
Advance angle deg.   1.2 0.7 1.7
Timer adjustment_04
Pump speed r/min   850
Advance angle deg.   2 1.5 2.5
Timer adjustment_05
Pump speed r/min   -
Advance angle deg.   4 4 4
Remarks
Measure the actual speed, stop  

Test data Ex:

Timing setting

Test data 106679-4140
(1)Pump vertical direction (2)Coupling's key groove position at No 1 cylinder's beginning of injection (3)- (4)-
----------

----------
a=(95deg)




Have questions with 106679-4140?





Group cross 106679-4140 ZEXEL

Mitsubishi-Heav 

106679-4140  

106679-4141 
9 400 619 663 
3626513210 
INJECTION-PUMP ASSEMBLY
S6B
106679-4141  

106679-4142 
 
3626523210 
INJECTION-PUMP ASSEMBLY
S6B
106679-4142  

106679-4143 
 
3626533210 
INJECTION-PUMP ASSEMBLY
S6B
106679-4143  

106679-4144 
 
3626543210 
INJECTION-PUMP ASSEMBLY
S6B
106679-4144  
9 400 612 706 
3626553210 
INJECTION-PUMP ASSEMBLY
S6B
Back to top